• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

ODAC - European and Worldwide pre-orders

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Turbon ; Sweden ; 1 ODAC ; Option 2 ; black ;
igor0203 ; Slovenia ; 1 ODAC ; Option 1 ; ;
mravlca ; Slovenia ; 1 ODAC ; Option 1 ; ;
Atilla ; Norway ; 1 ODAC ; Option 1 ; ;
TheShaman ; Greece ; 1 ODAC ; Option 1 ; ;
Greenalien ; UK ; 1 ODAC ; Option 1 ; ;
Finbob ; UK ; 1 ODAC ; Option 2 ; black ; ;
Finbob ; UK ; 1 ODAC ; Option 3 ; black ; ;
robodoc ; Germany ; 2 ODAC ; Option 1 ; ;
matulo_g ; Slovakia ; 1 ODAC ; Option 1 ; ;
endia ; Turkey ; 1 ODAC ; Option 1 ; ;
timpert ; Netherlands ; 1 ODAC ; Option 3 ; black ;
serios ; UK ; 1 ODAC ; Option 2 ; black ; one O2 PCB
pellesand ; sweden; 2 ODAC ; Option 1 ; ;
hubsand ; UK ; 2 ODAC ; Option 1 ; ;
forwidur ; CH, Zurich ; 1 ODAC ; Option 3 ; black;
schuhbu ; Germany ; 1 ODAC ; Option 1 ; ;
Big Brown ; Singapore ; 1 ODAC ; Option 1 ; ;
Nikola Krivorov ; Bulgaria ; 1 ODAC ; Option 2 ; 1 O2 kit and PCB
Gaston ; Sweden; 1 ODAC ; Option 2 ; black ;
mabur ; Germany ; 1 ODAC ; Option 1 ; ;
kjus; Switzerland; 1 ODAC ; Option 1 ; ;
Edwards.sj ; ??? ; 1 ODAC ; Option 1 ; ; O2 kit and PCB - by mail
gebi ; Germany ; 1 ODAC ; Option 1 ; ; - by mail
Sindre ; Norway ; 1 ODAC ; Option 1 ; ; O2 kit, PCB, 2x Batteries, desktop kit, power supply - by mail
mekanoplastik ; Spain ; 1 ODAC ; option 1 ; ;

changed my line
 
This was one of the reasons to make the smaller enclosure out of stainless steel, this would add some weight to the table.
But as you can see below tastes are different.

I'm actually don't mind the extra weight of the S.S. enclosure, I must admit the first thing that came to my mind was the mirror finished S.S. look which scratches very easily - similar to some O2 plates done is S.S. that I saw here on the forum - however if the S.S. is done with a brush finish I think it can look quite good and the enclosure will be more tolerant to scratches and things like that.

By the way the enclosure I'm referring to is the ODAC one, am I misreading something or are planning on having some RCA coming out of the ODAC?
 
I'm actually don't mind the extra weight of the S.S. enclosure, I must admit the first thing that came to my mind was the mirror finished S.S. look which scratches very easily - similar to some O2 plates done is S.S. that I saw here on the forum - however if the S.S. is done with a brush finish I think it can look quite good and the enclosure will be more tolerant to scratches and things like that.

By the way the enclosure I'm referring to is the ODAC one, am I misreading something or are planning on having some RCA coming out of the ODAC?

If stainless steal then the brushed version, I myself don't like the polished version as well. No, you are not misreading anything, the plan is to provide RCA output on the stand alone version as well as the 3.5 mm socket.
 
Turbon ; Sweden ; 1 ODAC ; Option 2 ; black ;
igor0203 ; Slovenia ; 1 ODAC ; Option 1 ; ;
mravlca ; Slovenia ; 1 ODAC ; Option 1 ; ;
Atilla ; Norway ; 1 ODAC ; Option 3 ; black ;
TheShaman ; Greece ; 1 ODAC ; Option 1 ; ;
Greenalien ; UK ; 1 ODAC ; Option 1 ; ;
Finbob ; UK ; 1 ODAC ; Option 2 ; black ; ;
Finbob ; UK ; 1 ODAC ; Option 3 ; black ; ;
robodoc ; Germany ; 2 ODAC ; Option 1 ; ;
matulo_g ; Slovakia ; 1 ODAC ; Option 1 ; ;
endia ; Turkey ; 1 ODAC ; Option 1 ; ;
timpert ; Netherlands ; 1 ODAC ; Option 3 ; black ;
serios ; UK ; 1 ODAC ; Option 2 ; black ; one O2 PCB
pellesand ; sweden; 2 ODAC ; Option 1 ; ;
hubsand ; UK ; 2 ODAC ; Option 1 ; ;
forwidur ; CH, Zurich ; 1 ODAC ; Option 3 ; black;
schuhbu ; Germany ; 1 ODAC ; Option 1 ; ;
Big Brown ; Singapore ; 1 ODAC ; Option 1 ; ;
Nikola Krivorov ; Bulgaria ; 1 ODAC ; Option 2 ; 1 O2 kit and PCB
Gaston ; Sweden; 1 ODAC ; Option 2 ; black ;
mabur ; Germany ; 1 ODAC ; Option 1 ; ;
kjus; Switzerland; 1 ODAC ; Option 1 ; ;
Edwards.sj ; ??? ; 1 ODAC ; Option 1 ; ; O2 kit and PCB - by mail
gebi ; Germany ; 1 ODAC ; Option 1 ; ; - by mail
Sindre ; Norway ; 1 ODAC ; Option 1 ; ; O2 kit, PCB, 2x Batteries, desktop kit, power supply - by mail
mekanoplastik ; Spain ; 1 ODAC ; option 1 ; ;

changed my line
 
Also these are two Hammond case that seem to work with the ODAC.

1455A1202 and 1455B1202

What I don't like about them are the semi-circle type edges as opposed to being rectangular like my O2 ;)

I do not like the edges as well... Furthermore the Hammond cases are for PCBs with a size of 60 x 120 mm, as the ODAC has a footprint of 49 x 58 mm I do not see how they could fit except using the old trusty hot glue gun ;)
 
Turbon ; Sweden ; 1 ODAC ; Option 2 ; black ;
igor0203 ; Slovenia ; 1 ODAC ; Option 1 ; ;
mravlca ; Slovenia ; 1 ODAC ; Option 1 ; ;
Atilla ; Norway ; 1 ODAC ; Option 3 ; black ;
TheShaman ; Greece ; 1 ODAC ; Option 1 ; ;
Greenalien ; UK ; 1 ODAC ; Option 1 ; ;
Finbob ; UK ; 1 ODAC ; Option 2 ; black ; ;
Finbob ; UK ; 1 ODAC ; Option 3 ; black ; ;
robodoc ; Germany ; 2 ODAC ; Option 1 ; ;
matulo_g ; Slovakia ; 1 ODAC ; Option 1 ; ;
endia ; Turkey ; 1 ODAC ; Option 1 ; ;
timpert ; Netherlands ; 1 ODAC ; Option 3 ; black ;
serios ; UK ; 1 ODAC ; Option 2 ; black ; one O2 PCB
pellesand ; sweden; 2 ODAC ; Option 1 ; ;
hubsand ; UK ; 2 ODAC ; Option 1 ; ;
forwidur ; CH, Zurich ; 1 ODAC ; Option 3 ; black;
schuhbu ; Germany ; 1 ODAC ; Option 1 ; ;
Big Brown ; Singapore ; 1 ODAC ; Option 1 ; ;
Nikola Krivorov ; Bulgaria ; 1 ODAC ; Option 2 ; 1 O2 kit and PCB
Gaston ; Sweden; 1 ODAC ; Option 2 ; black ;
mabur ; Germany ; 1 ODAC ; Option 1 ; ;
kjus; Switzerland; 1 ODAC ; Option 1 ; ;
Edwards.sj ; ??? ; 1 ODAC ; Option 1 ; ; O2 kit and PCB - by mail
gebi ; Germany ; 1 ODAC ; Option 1 ; ; - by mail
Sindre ; Norway ; 1 ODAC ; Option 1 ; ; O2 kit, PCB, 2x Batteries, desktop kit, power supply - by mail
mekanoplastik ; Spain ; 1 ODAC ; option 1 ; ;
danny_66 ; Belgium ; 1 ODAC ; Option 3 ; silver
 
problem being a very slim enclosure is that the cable weight will probably pull it, so i rather have a larger one...

That's a problem even with the large Box B2-080, but it's easily resolved. Use "bumpers" and even the slim cases won't budge:

Bumpon_01-1024x682.jpg


We give these away with every amp/DAC housed in an aluminum case.

--JDS
 
That's a problem even with the large Box B2-080, but it's easily resolved. Use "bumpers" and even the slim cases won't budge:

We give these away with every amp/DAC housed in an aluminum case.

--JDS

Hi JDS, agree with you, the other advantage is obviously that you do not scratch your furniture or case.
We as well supply them with every case.

Stefan
 
Last edited:
my pre-order

Turbon ; Sweden ; 1 ODAC ; Option 2 ; black ;
igor0203 ; Slovenia ; 1 ODAC ; Option 1 ; ;
mravlca ; Slovenia ; 1 ODAC ; Option 1 ; ;
Atilla ; Norway ; 1 ODAC ; Option 3 ; black ;
TheShaman ; Greece ; 1 ODAC ; Option 1 ; ;
Greenalien ; UK ; 1 ODAC ; Option 1 ; ;
Finbob ; UK ; 1 ODAC ; Option 2 ; black ; ;
Finbob ; UK ; 1 ODAC ; Option 3 ; black ; ;
robodoc ; Germany ; 2 ODAC ; Option 1 ; ;
matulo_g ; Slovakia ; 1 ODAC ; Option 1 ; ;
endia ; Turkey ; 1 ODAC ; Option 1 ; ;
timpert ; Netherlands ; 1 ODAC ; Option 3 ; black ;
serios ; UK ; 1 ODAC ; Option 2 ; black ; one O2 PCB
pellesand ; sweden; 2 ODAC ; Option 1 ; ;
hubsand ; UK ; 2 ODAC ; Option 1 ; ;
forwidur ; CH, Zurich ; 1 ODAC ; Option 3 ; black;
schuhbu ; Germany ; 1 ODAC ; Option 1 ; ;
Big Brown ; Singapore ; 1 ODAC ; Option 1 ; ;
Nikola Krivorov ; Bulgaria ; 1 ODAC ; Option 2 ; 1 O2 kit and PCB
Gaston ; Sweden; 1 ODAC ; Option 2 ; black ;
mabur ; Germany ; 1 ODAC ; Option 1 ; ;
kjus; Switzerland; 1 ODAC ; Option 1 ; ;
Edwards.sj ; ??? ; 1 ODAC ; Option 1 ; ; O2 kit and PCB - by mail
gebi ; Germany ; 1 ODAC ; Option 1 ; ; - by mail
Sindre ; Norway ; 1 ODAC ; Option 1 ; ; O2 kit, PCB, 2x Batteries, desktop kit, power supply - by mail
mekanoplastik ; Spain ; 1 ODAC ; option 1 ; ;
danny_66 ; Belgium ; 1 ODAC ; Option 3 ; silver
sourceror; Netherlands ; 1 ODAC ; option 1 ; ;
 
Turbon ; Sweden ; 1 ODAC ; Option 2 ; black ;
igor0203 ; Slovenia ; 1 ODAC ; Option 1 ; ;
mravlca ; Slovenia ; 1 ODAC ; Option 1 ; ;
Atilla ; Norway ; 1 ODAC ; Option 3 ; black ;
TheShaman ; Greece ; 1 ODAC ; Option 1 ; ;
Finbob ; UK ; 1 ODAC ; Option 2 ; black ; ;
Finbob ; UK ; 1 ODAC ; Option 3 ; black ; ;
robodoc ; Germany ; 2 ODAC ; Option 1 ; ;
matulo_g ; Slovakia ; 1 ODAC ; Option 1 ; ;
endia ; Turkey ; 1 ODAC ; Option 1 ; ;
timpert ; Netherlands ; 1 ODAC ; Option 3 ; black ;
serios ; UK ; 1 ODAC ; Option 2 ; black ; one O2 PCB
pellesand ; sweden; 2 ODAC ; Option 1 ; ;
hubsand ; UK ; 2 ODAC ; Option 1 ; ;
forwidur ; CH, Zurich ; 1 ODAC ; Option 3 ; black;
schuhbu ; Germany ; 1 ODAC ; Option 1 ; ;
Big Brown ; Singapore ; 1 ODAC ; Option 1 ; ;
Nikola Krivorov ; Bulgaria ; 1 ODAC ; Option 2 ; 1 O2 kit and PCB
Gaston ; Sweden; 1 ODAC ; Option 2 ; black ;
mabur ; Germany ; 1 ODAC ; Option 1 ; ;
kjus; Switzerland; 1 ODAC ; Option 1 ; ;
Edwards.sj ; ??? ; 1 ODAC ; Option 1 ; ; O2 kit and PCB - by mail
gebi ; Germany ; 1 ODAC ; Option 1 ; ; - by mail
Sindre ; Norway ; 1 ODAC ; Option 1 ; ; O2 kit, PCB, 2x Batteries, desktop kit, power supply - by mail
mekanoplastik ; Spain ; 1 ODAC ; option 1 ; ;
danny_66 ; Belgium ; 1 ODAC ; Option 3 ; silver
sourceror; Netherlands ; 1 ODAC ; option 1 ; ;

I'm removing my pre-order and moving it to Epiphany Acoustics as it makes more sense for me to buy locally - As Switzerland is outside the EEC, anything shipped into the UK will attract import duty, VAT and a handling charge, so buying from a local supplier will be cheaper for me. Sorry to mess you about.
 
I'm removing my pre-order and moving it to Epiphany Acoustics as it makes more sense for me to buy locally - As Switzerland is outside the EEC, anything shipped into the UK will attract import duty, VAT and a handling charge, so buying from a local supplier will be cheaper for me. Sorry to mess you about.

No offence taken, I understand your concerns. Thinking about it I could actually ship the orders from EEC countries from Germany, this way no fees and duties will apply.
 
Every vacation comes to an end... I will now prepare the shop so everything in stock will be up for grabs a bit later on today.
The ones that pre-ordered other stuff with their ODAC do not need to worry, I deduct their items from the stock.

Oh, never tought of customs fees from Swizterland. I just assumed that Switzerland was closely enough associated with the EU that this was of no concern. Obviously I am wrong.

Swtzerland is one of the Schengen countries, but unfortunately not of the ECC.

Send it from Germany please, not just for avoiding the the duties and taxes but also for the time spent at customs offices and papers and bank transfers to their account...

All, I will ship the orders for the EU from Germany, so no worries.
 
I added another one :)

Turbon ; Sweden ; 1 ODAC ; Option 2 ; black ;
igor0203 ; Slovenia ; 1 ODAC ; Option 1 ; ;
mravlca ; Slovenia ; 1 ODAC ; Option 1 ; ;
Atilla ; Norway ; 1 ODAC ; Option 3 ; black ;
TheShaman ; Greece ; 1 ODAC ; Option 1 ; ;
Finbob ; UK ; 1 ODAC ; Option 2 ; black ; ;
Finbob ; UK ; 1 ODAC ; Option 3 ; black ; ;
robodoc ; Germany ; 2 ODAC ; Option 1 ; ;
matulo_g ; Slovakia ; 1 ODAC ; Option 1 ; ;
endia ; Turkey ; 1 ODAC ; Option 1 ; ;
timpert ; Netherlands ; 1 ODAC ; Option 3 ; black ;
serios ; UK ; 1 ODAC ; Option 2 ; black ; one O2 PCB
pellesand ; sweden; 2 ODAC ; Option 1 ; ;
hubsand ; UK ; 2 ODAC ; Option 1 ; ;
forwidur ; CH, Zurich ; 1 ODAC ; Option 3 ; black;
schuhbu ; Germany ; 1 ODAC ; Option 1 ; ;
Big Brown ; Singapore ; 1 ODAC ; Option 1 ; ;
Nikola Krivorov ; Bulgaria ; 1 ODAC ; Option 2 ; 1 O2 kit and PCB
Gaston ; Sweden; 1 ODAC ; Option 2 ; black ;
mabur ; Germany ; 1 ODAC ; Option 1 ; ;
kjus; Switzerland; 1 ODAC ; Option 1 ; ;
Edwards.sj ; ??? ; 1 ODAC ; Option 1 ; ; O2 kit and PCB - by mail
gebi ; Germany ; 1 ODAC ; Option 1 ; ; - by mail
Sindre ; Norway ; 1 ODAC ; Option 1 ; ; O2 kit, PCB, 2x Batteries, desktop kit, power supply - by mail
mekanoplastik ; Spain ; 1 ODAC ; option 1 ; ;
danny_66 ; Belgium ; 1 ODAC ; Option 3 ; silver
danny_66 ; Belgium ; 1 ODAC ; Option 1 ;
sourceror; Netherlands ; 1 ODAC ; option 1 ; ;
 
Turbon ; Sweden ; 1 ODAC ; Option 2 ; black ;
igor0203 ; Slovenia ; 1 ODAC ; Option 1 ; ;
mravlca ; Slovenia ; 1 ODAC ; Option 1 ; ;
Atilla ; Norway ; 1 ODAC ; Option 3 ; black ;
TheShaman ; Greece ; 1 ODAC ; Option 1 ; ;
Finbob ; UK ; 1 ODAC ; Option 2 ; black ; ;
Finbob ; UK ; 1 ODAC ; Option 3 ; black ; ;
robodoc ; Germany ; 2 ODAC ; Option 1 ; ;
matulo_g ; Slovakia ; 1 ODAC ; Option 1 ; ;
endia ; Turkey ; 1 ODAC ; Option 1 ; ;
timpert ; Netherlands ; 1 ODAC ; Option 3 ; black ;
serios ; UK ; 1 ODAC ; Option 2 ; black ; one O2 PCB
pellesand ; sweden; 2 ODAC ; Option 1 ; ;
hubsand ; UK ; 2 ODAC ; Option 1 ; ;
forwidur ; CH, Zurich ; 1 ODAC ; Option 3 ; black;
schuhbu ; Germany ; 1 ODAC ; Option 1 ; ;
Big Brown ; Singapore ; 1 ODAC ; Option 1 ; ;
Nikola Krivorov ; Bulgaria ; 1 ODAC ; Option 2 ; 1 O2 kit and PCB
Gaston ; Sweden; 1 ODAC ; Option 2 ; black ;
mabur ; Germany ; 1 ODAC ; Option 1 ; ;
kjus; Switzerland; 1 ODAC ; Option 1 ; ;
Edwards.sj ; ??? ; 1 ODAC ; Option 1 ; ; O2 kit and PCB - by mail
gebi ; Germany ; 1 ODAC ; Option 1 ; ; - by mail
Sindre ; Norway ; 1 ODAC ; Option 1 ; ; O2 kit, PCB, 2x Batteries, desktop kit, power supply - by mail
mekanoplastik ; Spain ; 1 ODAC ; option 1 ; ;
danny_66 ; Belgium ; 1 ODAC ; Option 3 ; silver
danny_66 ; Belgium ; 1 ODAC ; Option 1 ;
sourceror; Netherlands ; 1 ODAC ; option 1 ; ;
miero ; Czech Republic ; 2 ODAC ; Option 1 ; ; KIT-O2-FULL-BLK
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.