Large Extrusion Group Buy Canadian/US

[TomWaits]

I deeply need to get my hands on a few slices of R-Theta 9012. A full stick is six feet long and the extrusion is 12 inches wide with 3 inch long fins. I can pick up locally at R-Theta here in Toronto and they have it in stock. I'm currently working a line on slicing it up for free or a small $$. Six feet is too much and I'll sit on it forever. I figure 4 pieces of 8 inches would make nice sides for my amps but I only need 4, that leaves almost 40 inches left. If you are interested email me shawn@raindogindustrialarts.com

Non profit, just freight and kick-butt aluminum!

Here are the numbers in Canadian funds:

1 stick 72 inches long $713.08 Cost including local taxes

32 inches for me $316.92

40 inches left worth $396.16
Cutting fees??? $50 Shared cost
Ship the balance to those interested Freight $20(or less) each shipment anywhere in North America.
It would be sliced whatever way required.

Cheers,
Shawn.

http://www.r-theta.com/products_stan...m_profiles.asp

[TomWaits]

Sorry, bad wording, it is a small buy.

[argofanatic]

Check this guy out.

I bought 12' off him. Very nice stuff.
Ebay Heatsinks

[PierreG]

Originally posted by argofanatic
Check this guy out.

I bought 12' off him. Very nice stuff.
Ebay Heatsinks

And what was your final cost ($CAN) with shipping and custom fees?

[TomWaits]

Originally posted by argofanatic
Check this guy out.

I bought 12' off him. Very nice stuff.
Ebay Heatsinks

That extrusion is 5-3/8 inches wide! I want a totally different extrusion 12 inches wide by three inches deep! Why would you post that stuff on this thread?

I've been lucky this Saturday, as I found a massive pile of extrusions that will fill my immediate needs. Still, in the long haul I know I want the wicked kick *** R-Theta Aluminum. So if yer interested email me, don't post to the thread.... don;’t waste your valued time

If you are serious email me. Shawn.

[TomWaits]

I sorted things out with a machine shop friend of mine today. It will cost only $5 per cut of any extrusion! That's that. I think it is more than fair. Auged Engineering & Machine Shop...Arunas is the man. Shawn.