Scalable PSU/regulator GB - Page 21

BobEllis · 2nd May 2006, 02:11 AM

The boards are due to ship to me on May 12th.

PSU parts are in and kitted except the 2K resistors and the 1200 uF caps. All extra 470 uF and 100 nF caps have been packed. For future group buys, a properly motivated 15 year old can pack about 1,000 caps an hour, regardless of type.

The 2K resistors are on the way here, but the big caps have slid from expected ship dates of some on 4/19 and the rest on 4/27 to scheduled to ship on June 4.

Orders without parts kits will ship as soon as I receive the boards.

If the 1200 uF cap ship date slips any further I will look into alternatives.

I still have plenty of BC546C and BC556C.

dfdye · 2nd May 2006, 03:09 AM

Quote:

Originally posted by BobEllis
I still have plenty of BC546C and BC556C.

I know we have been through this before, but how much are they again?

(I swear I read back through the thread, but I can't for the life of me fine out where they are!!)

Thanks!
David

peranders · 2nd May 2006, 04:19 AM

The answer is a couple of posts back

http://www.diyaudio.com/forums/showt...471#post896471

dfdye · 2nd May 2006, 04:34 PM

Quote:

Originally posted by peranders
The answer is a couple of posts back

http://www.diyaudio.com/forums/showt...471#post896471

I'm not even going to tell you how bad I missed that. I knew it was there and I STILL couldn't see it the first time around!

Thanks!

BobEllis · 2nd May 2006, 06:16 PM

I was able to substitute in stock 1500 uF Panasonic FCs for the 1200 uF that I ordered at nominal cost. They should ship today, so we are back to the board delivery as the time driver.

The 1500 uF caps are 25 mm tall, instead of the original 20. Those not using heat sinks now have a board ~3 mm taller than it would have been. I hope that this isn't a problem for anyone.

AndrewT · 3rd May 2006, 10:46 AM

Hi Bobellis,
can you update the 2134 wiki for me when you receive my ops?

BobEllis · 3rd May 2006, 10:57 AM

sure

BobEllis · 10th May 2006, 02:17 AM

PSU boards have shipped from Advanced. The filter boards should be delivered tomorrow, which was about a week to get to me. I expect the same for these.

BobEllis · 11th May 2006, 07:38 AM

Filter boards are in.

PSU boards due on 5/16.

kestrel200 · 15th May 2006, 10:42 PM

Bob,

Any idea when you'll start shipping the kits from the 1st round?

Mike

2nd May 2006, 02:11 AM	#201
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	Status report The boards are due to ship to me on May 12th. PSU parts are in and kitted except the 2K resistors and the 1200 uF caps. All extra 470 uF and 100 nF caps have been packed. For future group buys, a properly motivated 15 year old can pack about 1,000 caps an hour, regardless of type. The 2K resistors are on the way here, but the big caps have slid from expected ship dates of some on 4/19 and the rest on 4/27 to scheduled to ship on June 4. Orders without parts kits will ship as soon as I receive the boards. If the 1200 uF cap ship date slips any further I will look into alternatives. I still have plenty of BC546C and BC556C.

2nd May 2006, 04:19 AM	#203
peranders Electrons are yellow and more is better! diyAudio Member Join Date: Apr 2002 Location: Göteborg, Sweden Blog Entries: 4	The answer is a couple of posts back http://www.diyaudio.com/forums/showt...471#post896471 __________________ /Per-Anders (my first name) or P-A as my friends call me

3rd May 2006, 10:46 AM	#206
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	Hi Bobellis, can you update the 2134 wiki for me when you receive my ops? __________________ regards Andrew T.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zener regulator with "integrated" pre-regulator	00940	Power Supplies	17	22nd July 2008 05:11 PM
Lithos regulator - A new super regulator?	peranders	Parts	7	8th May 2008 02:01 PM
Scalable Power Supply GB	BobEllis	Solid State	0	3rd April 2006 05:11 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd May 2006, 06:16 PM	#205
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	I was able to substitute in stock 1500 uF Panasonic FCs for the 1200 uF that I ordered at nominal cost. They should ship today, so we are back to the board delivery as the time driver. The 1500 uF caps are 25 mm tall, instead of the original 20. Those not using heat sinks now have a board ~3 mm taller than it would have been. I hope that this isn't a problem for anyone.

3rd May 2006, 10:57 AM	#207
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	sure

10th May 2006, 02:17 AM	#208
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	PSU boards have shipped from Advanced. The filter boards should be delivered tomorrow, which was about a week to get to me. I expect the same for these.

11th May 2006, 07:38 AM	#209
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	Filter boards are in. PSU boards due on 5/16.

15th May 2006, 10:42 PM	#210
kestrel200 diyAudio Member Join Date: Feb 2004 Location: Mt. Pleasant SC	Bob, Any idea when you'll start shipping the kits from the 1st round? Mike

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read