ATI chassis

cheeba · 6th March 2006, 09:06 PM

Heya

I'm new here and don't really know the whole process of organising a group-buy, but I am trying to put together a few people to get some reasonably-priced chassis.

Here's the thread:

Where to get a chassis in Canada or US?

t3rrence · 7th March 2006, 08:25 AM

I would be interested in the chassis.

cheeba · 8th March 2006, 08:21 AM

Okay, we've got 4 chassis spoken for - 3 left.

Lemme' know if anyone has any questions. Here's a pic of the 645-TH:

rjkdivin · 9th March 2006, 03:54 AM

Quote:

Originally posted by cheeba
Okay, we've got 4 chassis spoken for - 3 left.

Lemme' know if anyone has any questions. Here's a pic of the 645-TH:

Hi Cheeba,

I will go in for two of them.

Robert

rjkdivin · 9th March 2006, 04:25 AM

Quote:

Originally posted by cheeba

Lemme' know if anyone has any questions. Here's a pic of the 645-TH:

By the way, your email seems to be turned off.

Robert

cheeba · 9th March 2006, 05:09 AM

Hey, rjkdivin

Oops, it's turned on now. Can anyone tell me how to enable my private messaging as well?

We've got 6 out of 7 chassis spoken for then. I'm still waiting to hear back about reducing the exorbitant shipping fees I was quoted.

Just in case anyone hasn't checked the other thread for this info:

As it stands, we can get them express shipped (a week, or so) for $98.50USD or $113CAD. It will cost me about $20USD to re-ship them to almost anywhere in the US. I will use actual shipping costs + packaging. I will not charge anything for my time/gas/whatever...

The total cost, even with re-shipping, will still be much lower than it would have cost to get the enclosures with 4-6 week shipping.

rjkdivin · 9th March 2006, 07:03 AM

That all sounds fine to me.

Robert

enzedone · 9th March 2006, 07:25 PM

I sooooooooooooooo. wish i could get my hands on something like that. But I've never seen anything as good as that case in New zealand. What is the name of the company? And do they have a web site i could have a look at. I don't think I'll ever be able to afford to buy them, the exchange rate it just too dam high, but i'd sure like to check them out.

Brett

cheeba · 9th March 2006, 08:28 PM

Yeah, I think they're just beautiful cases - and in a clean, simple way. Here's their site:

http://www.atiresearch-anodized.com/

I spoke with ATI again and they can't reduce shipping. They are 50KM from a DHL depot, so they have to use the local postal system.

They also told me that the power switch is in a fixed location (as pictured).

Is everyone okay with adding 3% and sending money to me via PayPal (verified account). I would then remit payment to ATI via bank transfer. I would like to receive funds in USD so that we don't get shafted by PayPal's gratuitous exchange rates; especially considering ATI accepts payments in USD.

Not sure how these group-buys work; is there a standard procedure?

We just need 1 more, guys!

AR_sound · 9th March 2006, 08:39 PM

Hi Brett,

Here is the link:

http://www.atiresearch-anodized.com/

You can get prices by email to Arthon from ATI-R,

thay seems to be nice pepole to work with.
But can not eccept PayPal and can be payed only by money Bank transfer.

Avi.

6th March 2006, 09:06 PM	#1
cheeba diyAudio Member Join Date: Jan 2005 Location: Canada	ATI chassis Heya I'm new here and don't really know the whole process of organising a group-buy, but I am trying to put together a few people to get some reasonably-priced chassis. Here's the thread: Where to get a chassis in Canada or US?

9th March 2006, 07:25 PM	#8
enzedone diyAudio Member Join Date: Nov 2004 Location: New Zealand	Just as well you can't see me dribbling I sooooooooooooooo. wish i could get my hands on something like that. But I've never seen anything as good as that case in New zealand. What is the name of the company? And do they have a web site i could have a look at. I don't think I'll ever be able to afford to buy them, the exchange rate it just too dam high, but i'd sure like to check them out. Brett __________________ I realized that a major part of my job was to figure out how to use technology control to create economic force, or leverage, such that money and business flowed in Microsoft's direction” — Alex St.John, father of DirectX.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5E3 chassis	Colinsky	Everything Else	0	23rd July 2008 11:10 AM
What d'you put in the PSU chassis, and what in the circuit chassis?	andyjevans	Tubes / Valves	5	15th December 2007 12:41 AM
WTB: 2U chassis	DcibeL	Swap Meet	14	16th December 2006 02:06 AM
How to star ground to Chassis without a Chassis??	Minion	Chip Amps	10	5th November 2006 05:28 PM
Where to get chassis or chassis parts in Vancouver?	Prune	Parts	1	7th July 2004 06:37 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

7th March 2006, 08:25 AM	#2
t3rrence diyAudio Member Join Date: Dec 2004 Location: Sunnyvale, CA	I would be interested in the chassis.

9th March 2006, 05:09 AM	#6
cheeba diyAudio Member Join Date: Jan 2005 Location: Canada	Hey, rjkdivin Oops, it's turned on now. Can anyone tell me how to enable my private messaging as well? We've got 6 out of 7 chassis spoken for then. I'm still waiting to hear back about reducing the exorbitant shipping fees I was quoted. Just in case anyone hasn't checked the other thread for this info: As it stands, we can get them express shipped (a week, or so) for $98.50USD or $113CAD. It will cost me about $20USD to re-ship them to almost anywhere in the US. I will use actual shipping costs + packaging. I will not charge anything for my time/gas/whatever... The total cost, even with re-shipping, will still be much lower than it would have cost to get the enclosures with 4-6 week shipping.

9th March 2006, 07:03 AM	#7
rjkdivin diyAudio Member Join Date: Oct 2005	That all sounds fine to me. Robert

9th March 2006, 08:28 PM	#9
cheeba diyAudio Member Join Date: Jan 2005 Location: Canada	Yeah, I think they're just beautiful cases - and in a clean, simple way. Here's their site: http://www.atiresearch-anodized.com/ I spoke with ATI again and they can't reduce shipping. They are 50KM from a DHL depot, so they have to use the local postal system. They also told me that the power switch is in a fixed location (as pictured). Is everyone okay with adding 3% and sending money to me via PayPal (verified account). I would then remit payment to ATI via bank transfer. I would like to receive funds in USD so that we don't get shafted by PayPal's gratuitous exchange rates; especially considering ATI accepts payments in USD. Not sure how these group-buys work; is there a standard procedure? We just need 1 more, guys!

9th March 2006, 08:39 PM	#10
AR_sound diyAudio Member Join Date: Jun 2004 Location: Modiin	Hi Brett, Here is the link: http://www.atiresearch-anodized.com/ You can get prices by email to Arthon from ATI-R, thay seems to be nice pepole to work with. But can not eccept PayPal and can be payed only by money Bank transfer. Avi.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)