Active filter board GB - Page 27

Garnett · 3rd April 2006, 09:53 AM

Board came while I was away for the weekend. Great parcel to come home to! Thanks guys! Great job.

pinkmouse · 3rd April 2006, 09:55 AM

Mine just dropped through the postbox as well. Thanks guys!

KT · 3rd April 2006, 02:15 PM

Bob,

This one totally slipped past me. Are there boards still available? If so, I'd like to get a stereo set.

Thanks,
KT

BobEllis · 3rd April 2006, 02:35 PM

Round two is open, along with a PSU and PSU Parts kit - see http://www.diyaudio.com/wiki/index.p...ulator+Boards+

send me an email with the information requested in this post

rjb · 3rd April 2006, 10:39 PM

Boards received today. Look good.Thanks Bob.
Wiki updated

argofanatic · 3rd April 2006, 10:48 PM

The postman rang once !

I received my boards today. Nice layout Jens, thanks for all the effort Bob. Hats off to both of you.

BobEllis · 4th April 2006, 04:46 AM

Since the PSU layout now uses the same size output caps as the filter boards' inputs, why not buy them all together?

Panasonic FC 470 uf/25V 10 mm dia x 5 mm spacing 10 for $2.80

And since everyone always needs 100 nf bypass caps:

Epcos 100 nf MKT 63V 2.5mm x 7.5 mm 10 for $1.00

Sign up on the PSU WIKI/email me with your requirements.

BobEllis · 4th April 2006, 05:45 PM

The Manual is still receiving its finishing touches, but this spreadsheet should get you started.

Constructive comments requested. I am not good enough with Excel to offer pull down capacitor choices, but I listed standard values in the comments on each capacitor entry cell.

SamL · 5th April 2006, 07:48 AM

Board arrived and in good condition. Must say they are a lot smaller than I expected. Though I'll have a space to use fancy cap but never mind.

Thanks Bob and Jens!

BobEllis · 6th April 2006, 11:23 AM

The manual is complete.

http://www.delta-audio.com/Active_Fi...our_manual.pdf

Now get soldering!

3rd April 2006, 09:53 AM	#261
Garnett diyAudio Member Join Date: Feb 2006 Location: London	Board came while I was away for the weekend. Great parcel to come home to! Thanks guys! Great job. __________________ Usually mitigation for all my dumb questions: I will endeavour to make sure I explain everything I find out on www.substitutereality.co.uk so that other newbies like me have a useful resource to check first...

3rd April 2006, 09:55 AM	#262
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	Mine just dropped through the postbox as well. Thanks guys! __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Active filter board GB	BobEllis	Solid State	0	21st February 2006 09:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd April 2006, 02:15 PM	#263
KT diyAudio Member Join Date: Oct 2003 Location: USA	Bob, This one totally slipped past me. Are there boards still available? If so, I'd like to get a stereo set. Thanks, KT

3rd April 2006, 02:35 PM	#264
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	Round two is open, along with a PSU and PSU Parts kit - see http://www.diyaudio.com/wiki/index.p...ulator+Boards+ send me an email with the information requested in this post

3rd April 2006, 10:39 PM	#265
rjb diyAudio Member Join Date: Jun 2004 Location: Piha	Boards received today. Look good.Thanks Bob. Wiki updated

3rd April 2006, 10:48 PM	#266
argofanatic diyAudio Member Join Date: Jul 2005 Location: Quebec, Canada	The postman rang once ! I received my boards today. Nice layout Jens, thanks for all the effort Bob. Hats off to both of you.

4th April 2006, 04:46 AM	#267
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	Since the PSU layout now uses the same size output caps as the filter boards' inputs, why not buy them all together? Panasonic FC 470 uf/25V 10 mm dia x 5 mm spacing 10 for $2.80 And since everyone always needs 100 nf bypass caps: Epcos 100 nf MKT 63V 2.5mm x 7.5 mm 10 for $1.00 Sign up on the PSU WIKI/email me with your requirements.

5th April 2006, 07:48 AM	#269
SamL diyAudio Member Join Date: Jun 2004 Location: Wgtn	Board arrived and in good condition. Must say they are a lot smaller than I expected. Though I'll have a space to use fancy cap but never mind. Thanks Bob and Jens!

6th April 2006, 11:23 AM	#270
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	The manual is complete. http://www.delta-audio.com/Active_Fi...our_manual.pdf Now get soldering!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)