MOX active crossover buy - Page 2

chipco3434 · 10th March 2005, 04:47 PM

>>>snip

eponymous nature

>>>snip

Help me out. This might be the only thing I learn today. I read the definitiion but I am confused by the usage.

eponym
"one for whom or which something is or is believed to be named"

I will post pictures of my completed MOX shortly. Plexiglas enclosure. Pretty cool! Even better... it works!

moamps · 10th March 2005, 07:37 PM

Quote:

Originally posted by tiroth
......Grounding -- this could be a challenge......

...and don't I just looove challenges

Here is what I had in mind for grounding.

Regards,
Milan

P.S. Some well-known eponyms: America - Amerigo Vespucci, Colt - Samuel Colt, Mount Everest - Sir George Everest, Zeppelin - Ferdinand von Zeppelin.... and of course MOX - Milan's Own Xover

P.P.S. Congratulations chipco!

tiroth · 10th March 2005, 07:58 PM

I thought I would let you spill the beans Milan.

Thanks for your drawing. I think I initially rejected this, because I had some pretty generous clearance constraints and I couldn't fit everything. Since this order will be for production boards with mask and not the bare ones I ordered for myself, it shouldn't be a problem.

I guess it is also a bit unnecessary to make the toplayer pads so wide.

tiroth · 14th March 2005, 06:36 PM

I know I owe everyone a PCB update, but is there any additional interest? I've only had a handful of people express interest so far.

Thanks.

joster · 14th March 2005, 07:02 PM

I'd be in for 4 mox and 4 moxlite, thanks for your efforts!

Ed LaFontaine · 31st March 2005, 09:07 PM

Tyler, I'm in for 8 moxlite. Hope more interest is shown.

Regards,

Cambe · 31st March 2005, 10:32 PM

Hi,
I would be interested in the MOX version 1.1 and discrete op-amp
boards (4).
Cambe

jonk · 31st March 2005, 10:57 PM

I'd be in for four MOXlites....

tiroth · 1st April 2005, 05:12 PM

I was just about to declare this dead, but I'll let it stay out for a few more days. I think there is almost enough interest in the MoxLite.

Thanks to everyone who has responded so far.

SvErD · 1st April 2005, 06:27 PM

Quote:

Originally posted by tiroth
I was just about to declare this dead, but I'll let it stay out for a few more days. I think there is almost enough interest in the MoxLite.

Thanks to everyone who has responded so far.

Tyler, I'm also intrested in a few MOW-lite as well, in addition to the other stuff. Any news from Newark?

cheers
Svein

31st March 2005, 09:07 PM	#16
Ed LaFontaine ...truth seeker... diyAudio Member Join Date: Feb 2004 Location: where the Appalachians rise from the Blue Grass	ME2 Tyler, I'm in for 8 moxlite. Hope more interest is shown. Regards, __________________ ...call me Ed...Special Ed... EnABL kit http://www.diyaudio.com/forums/swap-meet/119852-enabl-kit.html DCB1 parts http://www.diyaudio.com/forums/swap-...ml#post2361098

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
active crossover: fir vs iir	netchris	Everything Else	3	29th July 2008 09:14 AM
Passive crossover into active crossover	hahfran	Multi-Way	16	10th February 2008 06:16 PM
PA vs DIY active crossover	paulspencer	Multi-Way	46	27th November 2004 01:25 AM
active crossover	aaronboumans	Analogue Source	4	31st May 2003 04:59 PM
XVR1 active crossover, discrete active stage	promitheus	Pass Labs	18	22nd July 2002 01:29 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th March 2005, 04:47 PM	#11
chipco3434 diyAudio Member Join Date: Feb 2004 Location: Racine, Wisconsin	>>>snip eponymous nature >>>snip Help me out. This might be the only thing I learn today. I read the definitiion but I am confused by the usage. eponym "one for whom or which something is or is believed to be named" I will post pictures of my completed MOX shortly. Plexiglas enclosure. Pretty cool! Even better... it works!

10th March 2005, 07:58 PM	#13
tiroth diyAudio Member Join Date: Dec 2001 Location: Pittsburgh, PA, USA	I thought I would let you spill the beans Milan. Thanks for your drawing. I think I initially rejected this, because I had some pretty generous clearance constraints and I couldn't fit everything. Since this order will be for production boards with mask and not the bare ones I ordered for myself, it shouldn't be a problem. I guess it is also a bit unnecessary to make the toplayer pads so wide.

14th March 2005, 06:36 PM	#14
tiroth diyAudio Member Join Date: Dec 2001 Location: Pittsburgh, PA, USA	I know I owe everyone a PCB update, but is there any additional interest? I've only had a handful of people express interest so far. Thanks.

14th March 2005, 07:02 PM	#15
joster diyAudio Member Join Date: Sep 2004 Location: St Louis	I'd be in for 4 mox and 4 moxlite, thanks for your efforts!

31st March 2005, 10:32 PM	#17
Cambe diyAudio Member Join Date: Aug 2001 Location: USA,NorthCarolina	Hi, I would be interested in the MOX version 1.1 and discrete op-amp boards (4). Cambe

31st March 2005, 10:57 PM	#18
jonk diyAudio Member Join Date: Feb 2003 Location: quebec	I'd be in for four MOXlites....

1st April 2005, 05:12 PM	#19
tiroth diyAudio Member Join Date: Dec 2001 Location: Pittsburgh, PA, USA	I was just about to declare this dead, but I'll let it stay out for a few more days. I think there is almost enough interest in the MoxLite. Thanks to everyone who has responded so far.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)