UK Heatsink Group Buy - Page 3

ANTHONY2181 · 3rd March 2005, 02:06 PM

Al

The Krell amps have turned out pretty well so i think i'll hang onto them for the time being.Might Bi amp my Kefs with two more amps see how it goes.

Cheers

Anthony

JensRasmussen · 3rd March 2005, 02:44 PM

Al,

I'd like something 150mm high, 300mm length, and a C/W of about 0.2 to 0.3.

And the base plate should be minimum 8 mm

\Jens

pinkmouse · 3rd March 2005, 02:59 PM

Wiki is up!

If you have any problems with logging your interest, Audiofreak is aware, and will be sorting them out over the weekend, so please be patient.

dr.strangelove3 · 3rd March 2005, 06:01 PM

Are there more interesting shapes to choose from? A site to look at the different heatsinks.

Something like this?

pinkmouse · 3rd March 2005, 06:26 PM

No website, just a paper catalogue. I want to keep this one simple, this time around, but if it goes well we might give another GB a go later on.

pinkmouse · 3rd March 2005, 06:28 PM

Quote:

Originally posted by JensRasmussen
I'd like something 150mm high, 300mm length, and a C/W of about 0.2 to 0.3.

And the base plate should be minimum 8 mm

I will have a look for something when I get home from work.

Tarasque · 3rd March 2005, 09:53 PM

Guy's,

I'm currently in contact with Seifert in Germany. The good thing is that they cut their heatsinks themselves and that means that it does not matter if various people would like different length from the same profile.
The prise typically is per Kilo and one or more additional cuts. Anodising is done after the cutting if required.

Have a look at:
http://www.seifert-electronic.de/ima...cs/kl-273d.gif
http://www.seifert-electronic.de/ima...cs/kl-273z.gif

Nisbeth · 3rd March 2005, 10:09 PM

Good link, Tarasque

Can get a price for this profile http://www.seifert-electronic.de/ima...cs/kl-271z.gif ? (I belive it matches what Jens was after as well)

/U.

pinkmouse · 3rd March 2005, 10:10 PM

What sort of price does that give for an equivalent piece?

:edit: Well, looks like the European buy is covered. That makes things a little simpler to organise for me.

I would still be interested in prices, to see if they are competitive, (has to include shipping to the UK though!)

Nisbeth · 3rd March 2005, 10:15 PM

Quote:

Originally posted by pinkmouse
Well, looks like the European buy is covered. That makes things a little simpler to organise for me.

You're not off the hook until we see their prices

/U.

3rd March 2005, 02:59 PM	#23
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	Wiki is up! If you have any problems with logging your interest, Audiofreak is aware, and will be sorting them out over the weekend, so please be patient. __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

3rd March 2005, 06:26 PM	#25
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	No website, just a paper catalogue. I want to keep this one simple, this time around, but if it goes well we might give another GB a go later on. __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

3rd March 2005, 10:10 PM	#29
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	What sort of price does that give for an equivalent piece? :edit: Well, looks like the European buy is covered. That makes things a little simpler to organise for me. I would still be interested in prices, to see if they are competitive, (has to include shipping to the UK though!) __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heatsink - Modified Group Buy	npapp	Group Buys	40	31st March 2010 05:11 PM
diy heatsink	JCM	Pass Labs	3	27th March 2006 05:52 AM
do I need to heatsink these?	Wagener	Solid State	14	2nd June 2005 02:55 AM
R-Theta 65340 12" Heatsink Group Buy	Coulomb	Swap Meet	28	13th July 2004 05:10 PM
Heatsink Tunnels group buy for the UK (Europe too?)	bigparsnip	Swap Meet	0	23rd September 2003 06:04 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd March 2005, 02:06 PM	#21
ANTHONY2181 diyAudio Member Join Date: Jul 2002 Location: HERTFORSHIRE UK	Al The Krell amps have turned out pretty well so i think i'll hang onto them for the time being.Might Bi amp my Kefs with two more amps see how it goes. Cheers Anthony

3rd March 2005, 02:44 PM	#22
JensRasmussen diyAudio Member Join Date: Jul 2002 Location: Denmark - Jutland	Al, I'd like something 150mm high, 300mm length, and a C/W of about 0.2 to 0.3. And the base plate should be minimum 8 mm \Jens

3rd March 2005, 09:53 PM	#27
Tarasque diyAudio Member Join Date: Dec 2002 Location: Netherlands	Guy's, I'm currently in contact with Seifert in Germany. The good thing is that they cut their heatsinks themselves and that means that it does not matter if various people would like different length from the same profile. The prise typically is per Kilo and one or more additional cuts. Anodising is done after the cutting if required. Have a look at: http://www.seifert-electronic.de/ima...cs/kl-273d.gif http://www.seifert-electronic.de/ima...cs/kl-273z.gif

3rd March 2005, 10:09 PM	#28
Nisbeth diyAudio Member Join Date: Jan 2001 Location: Denmark	Good link, Tarasque Can get a price for this profile http://www.seifert-electronic.de/ima...cs/kl-271z.gif ? (I belive it matches what Jens was after as well) /U.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read