GP on Aluminum enclosure for pre and amp

[jrsun]

Hi,

I'm going to set up a wiki to see the feasibility of GP on pre and amp enclsoure. It is just a POLL, not order. The price is tentative but probably very close to final price. Thanks!

5 different enclosures

1. 60mm/pre-amp: original aluminum color or black color: $80 + shipping
for details go to small Aluminum enclosre GP anyone ?
2. 100mm/pre-amp: original aluminum color or black color: $120 + shipping
for details go to GP on black Aluminum enclosure?
3. 130mm/amp: original aluminum color or black color: $120 + shipping
H130mmxD360mmxW390mm
4. class-A amp (up to 100W): black color
5. class-A amp (up to 150W): black color

wiki, please go to
http://www.diyaudio.com/wiki/index.p...P+in+enclosure

Please put down your number before 02/28/2005.
Once I collect the numbers, I'll negotiate the price (hopefully lower) with manufacture and post them for the final order, probably the end of march.

[jrsun]

Originally posted by jrsun

4. class-A amp (up to 100W): black color
H310mmxW300mmxL300mm; phin 40mm

[jrsun]

more pic on class A (100w): $450 + shipping

[scone]

Is that $80 + shipping for just the chassis, or the chassis with the connectors shown on the the pages you linked?

Also, who is the manufacturer?

[jrsun]

Originally posted by scone
Is that $80 + shipping for just the chassis, or the chassis with the connectors shown on the the pages you linked?

3 pairs of RCA, feet, 3-in-1 power switch are included, please check the updated wiki page

Originally posted by scone
Also, who is the manufacturer?

OEM for name barnd in Taiwan

[scone]

so the rca jacks and power module come installed in the chassis? who's doing the installation, the OEM manufacturer? i have too many questions, i know...

[tiroth]

Is #3 same as #1 and #2, just bigger/different knockouts?

[jrsun]

Originally posted by scone
so the rca jacks and power module come installed in the chassis? who's doing the installation, the OEM manufacturer? i have too many questions, i know...

Do not worry ! you can install them within minutes.

[jrsun]

Originally posted by tiroth
Is #3 same as #1 and #2, just bigger/different knockouts?

#3 is targeted for class AB amp so comes with RCAs and speaker binding post
#1 are #2 are targeted for pre-amp, so come with RCAs (and
XLRs)
However, I used #2 for gainclone putting binding posts in RCA holes without problem

[scone]

Originally posted by jrsun
However, I used #2 for gainclone putting binding posts in RCA holes without problem

That's what I'm planning on using #1 for . You could save yourself some trouble and ship the chassis, rca, and power module unassembled, and let the end user install the rcas themselves. Anyway, it would probably work out better for me, since then I could customize it at any point in the future if I decide to use the chassis for something other than an amp, etc.