3886inv gainclone PCB,group buy

[digi01]

the 3886IGC boards detail here: 3886IGC
specifications:
high quality PCB,made in BEIJING CHINA.
double side board,the PCB size is 1.8 x 1.72 inch.
Caps, diameter max=20mm,2mm holes.
single channel design,2 boards for stereo amp.
$4USD per board.
shipping cost is $6USD,by air to anywhere.
10 sets(20 piece) is available.

can place order via mail vcgft@yahoo.com.cn
for payment,paypal is welcome.

BTW,the regulator PCB is available at the same time.
specifications:
high quality PCB.
double side board,1.8 x 1.72 inch.
big filter cap,diameter max=32mm,2mm holes.
2 boards for +/- rail power.purpose for general use.
$4USD per board.
10 sets(20 piece) is available.
project detail here: regulator psu.


regards
digi

[peranders]

You can run your show in the way you like but I recommend you to create a wiki page. It will be easier both for you and your customers to keep track of things. I think the unspoken rule is to keep things rather open when it comes to group deals. I think you have done a fine job and the board deserves to be offered to a wider audience.

Why don't you just copy the structure of this page?
http://www.diyaudio.com/wiki/index.p...uper+Regulator

[digi01]

thank you peranders
wiki is so cool,I have create one.

http://www.diyaudio.com/wiki/index.php?page=3886igc

cheers!

[maxw]

Saweet! I paid for 2 regulator boards

[KT]

All regulator boards are accounted for, and we have gone over some!

If you stop taking orders for the regulators at this point, I hope there are some extras for the overrun?

Thanks,
KT

[thomas997]

Good price

[digi01]

Originally posted by KT
All regulator boards are accounted for, and we have gone over some!

If you stop taking orders for the regulators at this point, I hope there are some extras for the overrun?

Thanks,
KT

Really,it seems the design in general use is more popular
OK,then I will supply some extras for the overrun.

I will accept order from today till October 10.

regards

[JoeBob]

Quick question, these boards only do one rail, correct? For a dual mono with + and - rails one would need 4, right?

[digi01]

Yes,regulator board is single rail design.for dual mono need 4 pieces PCB.

Please wait for a moment,I am drawing a regulator hook method.

[digi01]

oh,finished.



digi