• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

My_Ref Fremen Edition GB (11th run)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
V

vglaso

Member
Joined 2008
transformers-

would one antek as-2222 (A 2 times 22 volt secondary at 22 volts/ 200 va power the two boards? (will it power both?) Or- might it be better to go dual mono? If so- what 2(two transformers might work better...for each one) (dual mono) seperate power supplies. ? I ask, as I built a maura pensa stereo amp some yrs. ago... with transformer from a tear down...(25 volt secondaries before rectifying) that one channel kept working ... before other channel failed ... almost overnight. I readily admit... I do not read all the details- question is what is best transformer to supply two boards and- what is best transformer(s)... to go dual mone seperate... with potentially a 4 ohm load. (but usually an 8 ohm load...) to play music. thanks!
 
ClaveFremen

ClaveFremen

Member
Joined 2005
inserra.it
Paid Member
vglaso said:
would one antek as-2222 (A 2 times 22 volt secondary at 22 volts/ 200 va power the two boards? (will it power both?) Or- might it be better to go dual mono? If so- what 2(two transformers might work better...for each one) (dual mono) seperate power supplies. ? I ask, as I built a maura pensa stereo amp some yrs. ago... with transformer from a tear down...(25 volt secondaries before rectifying) that one channel kept working ... before other channel failed ... almost overnight. I readily admit... I do not read all the details- question is what is best transformer to supply two boards and- what is best transformer(s)... to go dual mone seperate... with potentially a 4 ohm load. (but usually an 8 ohm load...) to play music. thanks!
Click to expand...

I suggest you to read first the build guide.

After that the correct place for asking is the build thread:

My_Ref Fremen Edition - Build thread and tutorial

The short answer for your question is: two transformers (160VA or more) with 2x24-25V secondaries (21-22V for 4 Ohm speakers), also a single 300VA one will do.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom