Regarding the FPGA modules, you need a JTAG interface that costs about 60 euros to program the configuration file into their flash memory ( JTAG HS2 Programming Cable | Trenz Electronic GmbH Online Shop (EN) ). It is very useful to have such a JTAG interface when you want to change the Verilog code or the filter coefficient sets and make your own configuration files, but it is rather a waste to buy it when you only want to program my valve DAC configuration file version 2.1 once in your life and never use it again.
I wouldn't mind programming a couple of modules with my JTAG interface and then shipping them to everyone. Maybe it makes sense then if I buy a couple of TE0630 LX75 modules with the matching special connectors, program them, change the 0 ohm resistor that needs to be changed and send them around.
I wouldn't mind programming a couple of modules with my JTAG interface and then shipping them to everyone. Maybe it makes sense then if I buy a couple of TE0630 LX75 modules with the matching special connectors, program them, change the 0 ohm resistor that needs to be changed and send them around.
Please let me know if anyone wants me to buy and program FPGA modules for them. It may take some time, as there is only one TE0630 LX75 module in stock at Trenz and only zero at Digi-Key and Mouser.
I would be interested in this offer.
Sorry if I missed this, but the filter PCB is also included, correct?
Yes, that is the 3rd picture in post 49, they are bare.
- Home
- Group Buys
- Interest for GB for MarcelvdG valve DAC