• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

GB for Baby Huey PCB

Member
Joined 2010
Paid Member
daniel goh 8 boards
RKH 2 boards
Dr.strangelove3 2 boards
mravinsky 2 boards
overtheairbroadcast 2 boards
jcastellano 2 boards
hallcon83 4 boards
davej 4 boards
mctavish 2 boards
bandol83 2 boards
jims 2 boards
Lutto 4 boards
skippyboy 2 boards
mituisho 2 boards
TS Lo 2 boards
meanie 2 boards
bekim 2 boards
Neurotica 2 boards

total 48 nos.
 
I'll take 4 boards please

daniel goh 8 boards
RKH 2 boards
Dr.strangelove3 2 boards
mravinsky 2 boards
overtheairbroadcast 2 boards
jcastellano 2 boards
hallcon83 4 boards
davej 4 boards
mctavish 2 boards
bandol83 2 boards
jims 2 boards
Lutto 4 boards
skippyboy 2 boards
mituisho 2 boards
TS Lo 2 boards
meanie 2 boards
bekim 2 boards
Neurotica 2 boards
hallcon83 4 boards

total 52 nos.
 
daniel goh 8 boards
RKH 2 boards
Dr.strangelove3 2 boards
mravinsky 2 boards
overtheairbroadcast 2 boards
jcastellano 2 boards
hallcon83 4 boards
davej 4 boards
mctavish 2 boards
bandol83 2 boards
jims 2 boards
Lutto 4 boards
skippyboy 2 boards
mituisho 2 boards
TS Lo 2 boards
meanie 2 boards
bekim 2 boards
Neurotica 2 boards
papavienneau 2 boards

total 50 nos.
 
with kind permission from Marc, I have touched up the serigraphy and aesthetics a bit to make rounded corners and rounded text.
Also slightly bigger pads and clearances at 30 mils. played with 3D models a bit (with whatever I had) , so here is how it all looks.

regards
Prasi
 

Attachments

  • baby Huey EL34 rev2.02_prasi.png
    baby Huey EL34 rev2.02_prasi.png
    366.3 KB · Views: 312
  • eagleUp_Baby Huey EL34 rev2.01_prasi_board_top.png
    eagleUp_Baby Huey EL34 rev2.01_prasi_board_top.png
    182.5 KB · Views: 323
  • eagleUp_Baby Huey EL34 rev2.01_prasi_board_bottom.png
    eagleUp_Baby Huey EL34 rev2.01_prasi_board_bottom.png
    104.7 KB · Views: 315
  • 1.jpg
    1.jpg
    278.4 KB · Views: 311
daniel goh 8 boards
RKH 2 boards
Dr.strangelove3 2 boards
mravinsky 4 boards
overtheairbroadcast 2 boards
jcastellano 2 boards
hallcon83 4 boards
davej 4 boards
mctavish 2 boards
bandol83 2 boards
jims 2 boards
Lutto 4 boards
skippyboy 2 boards
mituisho 2 boards
TS Lo 2 boards
meanie 2 boards
bekim 2 boards
Neurotica 2 boards
papavienneau 2 boards
If possible 2 more boards, please.
total 52 nos?.
 
daniel goh 8 boards
RKH 2 boards
Dr.strangelove3 2 boards
mravinsky 4 boards
overtheairbroadcast 2 boards
jcastellano 2 boards
hallcon83 4 boards
davej 4 boards
mctavish 2 boards
bandol83 2 boards
jims 2 boards
Lutto 4 boards
skippyboy 2 boards
mituisho 2 boards
TS Lo 2 boards
meanie 2 boards
bekim 2 boards
Neurotica 2 boards
papavienneau 2 boards
pvphil 2 boards
acccruz 2 boards

total 56 nos.
 
daniel goh 8 boards
RKH 2 boards
Dr.strangelove3 2 boards
mravinsky 4 boards
overtheairbroadcast 2 boards
jcastellano 2 boards
hallcon83 4 boards
davej 4 boards
mctavish 2 boards
bandol83 2 boards
jims 2 boards
Lutto 4 boards
skippyboy 2 boards
mituisho 2 boards
TS Lo 2 boards
meanie 2 boards
bekim 2 boards
Neurotica 2 boards
papavienneau 2 boards
pvphil 2 boards
acccruz 2 boards
DRoche 2 boards
bologna1 2 boards
total 60 nos.


Because of requirements still pouring in, I will place the order for the PCB over the weekend.

regards
Prasi
 
daniel goh 8 boards
RKH 2 boards
Dr.strangelove3 2 boards
mravinsky 4 boards
overtheairbroadcast 2 boards
jcastellano 2 boards
hallcon83 4 boards
davej 4 boards
mctavish 2 boards
bandol83 2 boards
jims 2 boards
Lutto 4 boards
skippyboy 2 boards
mituisho 2 boards
TS Lo 2 boards
meanie 2 boards
bekim 2 boards
Neurotica 2 boards
papavienneau 2 boards
pvphil 2 boards
acccruz 2 boards
DRoche 2 boards
bologna1 2 boards
mkm 2 boards

total 62 nos.


Because of requirements still pouring in, I will place the order for the PCB over the weekend.

regards
Prasi
 
Hello Prasi,
I had the chance to meet someone through the forum who is living not very far from me and had the skill to design the mechanical part of the amplifier, therefor we are trying to make a nice enclosure for this amplifier before to start somethings else.
For those interested there is some draft of the top, rear and front panel in this message. The top panel will be produced by Front Panel Express, Expensive but very nice ! This will be compatible with a chassis commonly available on internet : Boitier DIY 100% Aluminium angles arrondis 380x320x90mm Noir - Audiophonics
All measures are in mm and I have designed 3 small modules for selecting the input, controlling the volume with remote and powering this with standby control...

Best regards,
Marc

Simple suggestion:

Edit: Disregard this, I didn't see the pdf attachment, just images.

Kudos for incorporating easy biasing procedure! Holes for trimmers can be a nightmare to get right by sight.

Question:

Will the additional selector/volume board you designed be included in this group buy?

Another Question:

Would it be possible to include PSU board, selector/volume board, and baby huey board in one Group Buy?

It seems most attempting this project would likely want all 3 and this would make building more straightforward, with one BOM etc.
 
Last edited: