• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

CRC Power Supply (Class A amplifier)

Hello everyone.

Following the realization of several people of a class A amplifier (USSA-5 of Fab), I decided to draw a PCB dedicated especially to this one but that can be suitable for any other amplifier.
I wanted to do something fairly universal and practical and I told myself that this PCB might interest more people.

Features:

Size: 160mm x 100mm.
Possibility to put four capacitors up to diameter 40mm.
Possibility to put diodes (to220) soft or high recovery (capacitors provided).
Capacitors in parallel on the inputs of the diode bridges.
Possibility of putting an 'RC snubber' on the inputs of the diode bridges.
Possible resistances between capacitors from 5W to 10W.
'Bleeder' resistors from 3W to 5W

The latest version brings the possibility to put 5-legged capacitors and TO247 box diodes.


Update: Schematic:

An externally hosted image should be here but it was not working when we last tested it.



Silkscreen:

SILK.JPG



An externally hosted image should be here but it was not working when we last tested it.
 

Attachments

  • CRC Power Supply.JPG
    CRC Power Supply.JPG
    229.5 KB · Views: 9,380
Last edited:
  • Like
Reactions: 1 user
For the price, everything will depend on the number of people interested.

Ex, for a 2oz production of:

10 PCB => $ 4.5 each
15 PCB => 3.6 $ each
20 PCB => $ 3.5 each
25 PCB => 3 $ each
30 PCB => $ 2 each
Etc ...

Add the shipping costs.

Currently there is a demand for eight PCBs.

I will have the actual price at the end of the purchase group according to the number of people and confirmation will be made at this time.
 
Hello everyone

Currently with the demands on Quebec Diy the cost price of each PCB is 4.25 $ (US).
I hope that other interested people will come because this will decrease the price again.

I confirm that the PCBs will be in 2oz and 2.00 thickness.
For color, we will vote at the end of the purchase group (I have not yet chosen a date).

In some time I will put the list of buyers, I expect just one or two confirmations for the requested quantities on the other forum.

Thank you all! :)

Edit:
The price above does not take into account the demand for gwrskien, so it must be lower still.
I will therefore from now on indicate to each request the price of the PCB.
 
I think to start manufacturing in early next week as soon as 75 PCBs are requested, if there is a little more the maximum will be 100 PCB.

Here is the updated list.

Fab (2 boards)
Pinnocchio (4 boards)
Nounouchet (4 boards)
Haddock (2 or 4 boards)
Mcandmar (4 boards)
Project16 (2 boards)
AV Freak (4 boards)
Steve1 (4 boards)
Muhy3 (6 boards)
Myint67 (8 boards)
Gwrskien (10 boards)
Asuslover (2 boards)
Ssarchy08 (4 boards)
Morde (2 boards)
Ryssen (4 boards)

I have not checked yet but we should be around 4$ (US) each PCB (+ shipments)
I will tell you just before starting the manufacture.

Thank you.
 
Update:

Fab (2 boards)
pinnocchio (4 boards)
nounouchet (4 boards)
haddock (2 or 4 boards)
mcandmar (4 boards)
Project16 (2 boards)
AV Freak (4 boards)
Steve1 (4 boards)
muhy3 (6 boards)
Myint67 (8 boards)
gwrskien (10 boards)
asuslover (2 boards)
ssarchy08 (4 boards)
Morde (2 boards)
Ryssen (4 boards)
bristto (4 boards)
integra (8 boards)

:)