diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Group Buys (http://www.diyaudio.com/forums/group-buys/)
-   -   New MINI ZEN Headphone Amp PCB group order... (http://www.diyaudio.com/forums/group-buys/29784-new-mini-zen-headphone-amp-pcb-group-order.html)

digi01 8th March 2004 09:26 AM

New MINI ZEN Headphone Amp PCB group order...
 
2 Attachment(s)
zen headamp info,you can download my protel99se ddb file.

The boards size is 91X64(mm).The price is $4 USD per board.One amp need two piece of PCB. Use CHINA POST(ship) costs is $5 USD.

you need to email me directly to place an order. Instructions on this will be posted to this thread.

Boards, Total = 30 pieces.

My e-mail : zanghb@bjtzh dot gov dot cn

digi01 9th March 2004 03:38 AM

One AMP boards,PART LIST:
------------------------------------------------------------------------

R1\R2\R3\R8=1K,1/4W
R5\R6=220 ohm,1/4W
R7=33K,1/4W
R9=220K*,1/4W
R10\R11\R12=2.2 ohm,1W
R13=100K*,1/4W
R14=180K*,1/4W
R15=470 ohm,1/4W
R18=5.6 ohm ,3W

trim R16=100K,R17=1K

C1\C3=100uf/35V,ELNA CERAFINE
C2=4.7uf/63V,ERO
C4\C5=1000uf/63v ,ELNA FOR AUDIO
C6=2200uf/50v, ELNA Standard Audio Grade

connecter, 2 pin(3 pieces)

I can offer the resistance and capacity KIT package.Including all resistance and capacity the board need.The total cost $18,shiping by CHINA POST.

Q1\Q2=IRF610,
Q3=2sc1815

thomas997 9th March 2004 05:12 AM

So how much for the board and components? 22$?

Thanks

digi01 9th March 2004 05:36 AM

yes,the board and components is $22 USD.Make a stereo headamp,you need two sets of these.

NOTICE: the components is not include the transistor Q1/Q2/Q3.

bzo 9th March 2004 06:06 AM

what kind of resistors are they?

digi01 9th March 2004 07:55 AM

2 Attachment(s)
OHH,I have written a mistake.it should be the 'resistors' :dead:

There are two kinds of resistors.the small 1/4W resistors is standard metal film,the big resistors R10\R11\R12 and R18 are DALE type.

If some of your components are bigger there is enough room for modifications.
This is a experimental version,I use some different components inside.

--digi01

tortello 10th March 2004 09:50 PM

All the project's details and PCB layouts of the original version can be found in the Headwize site:
link

Marcello

digi01 12th March 2004 07:32 AM

Hi Marcello,Thanks for a very fine contribution.ZEN headamp is my first project of your design.Do you hope that zen is as one kit? I wish this amp can be more diyers make,just like PPA ,gilmore and such these.I do not have experience in this action, your view?

Regards-digi01

tortello 14th March 2004 06:50 AM

Hello digi01, for me there is no problem at all.
If somebody will ask me again the project's PCBs, I will redirect them to this page.
Cheers
Marcello

roibm 15th March 2004 11:31 AM

I am interested :smash: :hot:

Anyone else from Germany interested?


All times are GMT. The time now is 03:26 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2