Is there an estimate when the goods will be shipped to the buyers?
Impatiantly waiting now my fifopi has arrived
PCBs arrived, I'm still waiting to know delivery time from Laptech. Laptech's lead time is tipically 6-8 weeks.
I'm still waiting for your payment since your crystals have been ordered.
Andrea
I have just sent you a PayPal reminder, I'm still waiting for the payment of the crystals I have ordered for you.
Please, let me know.
Andrea
Hi,
what do you want to do with your order? I have already paid for the crystals you ordered.
Please, let me know within a few days, otherwise I'll going to cancel your order, looking for someone interested on these crystals.
Andrea
@ Ilgavro : I think you have perhaps not to wait a next one if what you're looking for is in that range : 1 x SC-Cut 5.6448 MHz + 1 x SC-Cut 6.144 MHz + 1 x SC-Cut 45.1584 MHz + 1 x SC-Cut 49.1520 MHz + 2 x TWTMC-D + 2 x TWTMC-OVN+ 2 x TWTMC-DIL
This is what HelloPitty123 ordered and do not paid to AndreMori. One may jump on it as there is more than one year before two GB shippment.
@Andrea: any PP insurance or signalment to block the PP account of this guy ?
This is what HelloPitty123 ordered and do not paid to AndreMori. One may jump on it as there is more than one year before two GB shippment.
@Andrea: any PP insurance or signalment to block the PP account of this guy ?
Last edited:
These 2 frequencies left may interrest Wlowes (if not using ovrsampling) member with a DIL12 adaptator of your to stack a discroll board directly on the iancanada fifopi board (halas my understanding there is no room to adapt two DIL12 adaptator as on the fifo Pi the clock areas were 180° flipped.
Anyway if like me you mostly listen 5.6448 MHz multiple, it's not of an importance to also use a Laptech on the 6.144 MHz area. While you can use both but whith no direct stacking, i.e. use the uf-l adaptator boards with short 2" uf-l wires as jitter is of a less importance with old PCM chips (instead delta-sigma dac chips)
Anyway if like me you mostly listen 5.6448 MHz multiple, it's not of an importance to also use a Laptech on the 6.144 MHz area. While you can use both but whith no direct stacking, i.e. use the uf-l adaptator boards with short 2" uf-l wires as jitter is of a less importance with old PCM chips (instead delta-sigma dac chips)
I was tempted. I was lucky to get the 45/49 pair. I suspect the 5/6 pair would be perfect for the TDA1541a rig I run, but I wanted to ultimately have a system that will play anything. I am enjoying a tda1541a that occasionally plays 96, 192k or DSD64. 99% of my listening is at redbook speed.
Now I have to get up to speed with this thread and figure out how to use it with Iancanada FIFOPi. If anyone has taken that path, let me know. Much fun ahead.
Now I have to get up to speed with this thread and figure out how to use it with Iancanada FIFOPi. If anyone has taken that path, let me know. Much fun ahead.
@Wolwes
I understand now, I believed it was Ilgavro member who got these 45/49 Mhz.
My understanding is the discroll board to come is a double clock one, not stackable on the Fifoboard, but standalone clock Discrol previous board seems ok for stacking (but only one pad, no room for the two areas of the FifoPi).
You can also use the Dil-12 to uf-l adaptator to link with a 2" uf-l wire to the new double Discrol adapatator
I understand now, I believed it was Ilgavro member who got these 45/49 Mhz.
My understanding is the discroll board to come is a double clock one, not stackable on the Fifoboard, but standalone clock Discrol previous board seems ok for stacking (but only one pad, no room for the two areas of the FifoPi).
You can also use the Dil-12 to uf-l adaptator to link with a 2" uf-l wire to the new double Discrol adapatator
Hi,
Is there any indication of delivery dates? It's been quite some weeks now
I was wondering the same thing, just dropped an email to Andrea to know about the status
Crystals should be delivered within the end of May, I'm still waiting the final date from Laptech.
I'm sorry, but as I said several times, Laptech's lead time is very long, at least 6-8 weeks.
As soon as I receive the package from Laptech I will ship immediatelly each order.