Pass DIY Addict
Joined 2000
Paid Member
I am currently out of boards.
I am going to do another small run of them, as some have been able to get good pairs from the diyaudiostore GB.
On that note, I have some extra VFETS I am trying to make pairs for. So if anyone has any spare 2SJ28 parts, let me know. I wish to buy them and try to match them with my stash. If not, I will have some singles to spare for both N and P channel parts.
I am going to do another small run of them, as some have been able to get good pairs from the diyaudiostore GB.
On that note, I have some extra VFETS I am trying to make pairs for. So if anyone has any spare 2SJ28 parts, let me know. I wish to buy them and try to match them with my stash. If not, I will have some singles to spare for both N and P channel parts.
I am currently out of boards.
I am going to do another small run of them, as some have been able to get good pairs from the diyaudiostore GB.
On that note, I have some extra VFETS I am trying to make pairs for. So if anyone has any spare 2SJ28 parts, let me know. I wish to buy them and try to match them with my stash. If not, I will have some singles to spare for both N and P channel parts.
I have some j28s tested and marked please pm me.
I am going to do another small run of these boards.
There are a few people who have asked for them, as they were able to obtain some pairs out there, and want to make the paired version.
So if you want in on this GB, let me know as soon as possible. I will be closing the GB on 11/20/16
I will sending out Private messages to the people who have shown interest.
There are a few people who have asked for them, as they were able to obtain some pairs out there, and want to make the paired version.
So if you want in on this GB, let me know as soon as possible. I will be closing the GB on 11/20/16
I will sending out Private messages to the people who have shown interest.
Tea,
how does your circuit compare to the kit version they are currently signing up for in the main thread?
I have no vfets and my concern is if I have to buy the complete kits now to get those?
also: how does the original version with 2 pairs per channel compare to this one? would your pcbs still be usable? (sorry that I did not do the homework).
I need min 30W/ch@8ohm and my options are either the 2 pair per channel version or to run these single pair versions bridged with a balanced preamp (not sure what that would add up to in terms of noise and sound though).
how does your circuit compare to the kit version they are currently signing up for in the main thread?
I have no vfets and my concern is if I have to buy the complete kits now to get those?
also: how does the original version with 2 pairs per channel compare to this one? would your pcbs still be usable? (sorry that I did not do the homework).
I need min 30W/ch@8ohm and my options are either the 2 pair per channel version or to run these single pair versions bridged with a balanced preamp (not sure what that would add up to in terms of noise and sound though).
Tea,
how does your circuit compare to the kit version they are currently signing up for in the main thread?
I have no vfets and my concern is if I have to buy the complete kits now to get those?
also: how does the original version with 2 pairs per channel compare to this one? would your pcbs still be usable? (sorry that I did not do the homework).
I need min 30W/ch@8ohm and my options are either the 2 pair per channel version or to run these single pair versions bridged with a balanced preamp (not sure what that would add up to in terms of noise and sound though).
This version compares only to the original Sony VFET version 2 design Nelson originally designed, and requires 8 VFETs total, 2 Matched Pairs of 2SK82 and 2 pairs of 2SJ28s.
If you do not have matched pairs of VFETs, this board set if not for you!
I have not listened to the single paired version for comparison, but I have heard it it very close in sound, but not in output wattage.
Got it. THX.
I am also getting caught up on the threads and I have already answered my own questions. it is your board that I would need if I was lucky to get the matched vfets in sufficient numbers. the issue is the kits built around the single pair version have the advantage in diyaudio store, so I shall have to wait and see.
I am also getting caught up on the threads and I have already answered my own questions. it is your board that I would need if I was lucky to get the matched vfets in sufficient numbers. the issue is the kits built around the single pair version have the advantage in diyaudio store, so I shall have to wait and see.
I would like to get in on this run!
2 pairs, please
Arne K
Arne,
I sent a PM to you.
Regards,
Tea
Hi Tea,
Please put me down for a pair of outputs, pair of inputs, front end heat sinks and the male and female connectors please.
Thank you,
Cody
I have sent you an invoice.
Error on latest release of boards!!!
So the boards, the front end, and output boards have the silkscreens printed on the wrong side of the board. So, they are deffective by way on instructions. Unless you can build a board confidently upside down, please wait until I send out new boards. This will only be for users who have purchased boards for the GB that closed on 11/20/2016. Let me know if there there are any questions.
To those who got the recent boards.
The output boards are defective, the traces are on the wrong side of the board (should be on botttom).
Please don't build on them. I Will get them replaces asap.
So the boards, the front end, and output boards have the silkscreens printed on the wrong side of the board. So, they are deffective by way on instructions. Unless you can build a board confidently upside down, please wait until I send out new boards. This will only be for users who have purchased boards for the GB that closed on 11/20/2016. Let me know if there there are any questions.
- Home
- Group Buys
- GB Pass SONY VFET Version 2 - AL Boards by Tea-Bag