• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

supa phono preamplifier pcb

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
S

souplesse

Member
Joined 2017
Questions ;-).
I want to bypass the power supply used on the schematics and would like to use my own 18v dual power supply.
For this, I do not know if I have to bypass T19/20 and R16/20 too?
Could someone help me understand if T19/20 are needed for the RIAA stage or for the PS ?
Best,
https://image.noelshack.com/fichier...-super-low-noise-preamp-circuit-souplesse.jpg
20 too
 
S

schillg11

Member
Joined 2011
souplesse said:
Questions ;-).
I want to bypass the power supply used on the schematics and would like to use my own 18v dual power supply.
For this, I do not know if I have to bypass T19/20 and R16/20 too?
Could someone help me understand if T19/20 are needed for the RIAA stage or for the PS ?
Best,
https://image.noelshack.com/fichier...-super-low-noise-preamp-circuit-souplesse.jpg
20 too
Click to expand...

Hi,

you can bypass T18/20 and R16/20 and C9/10 (called gyrotor in the original article), they are used for noise reducction on the power supply, or simply bypass only the ps regulator (IC1/2, C11/12 and C13/14) and check the result for noise. Depends how good your own +/- 18 V PS is, regarding noise.

BR
Günni.
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom