• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

GB UP/UGS All Inclusive PCBs

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
F

Faame

Member
Joined 2014
[Closed] GB UP/UGS All Inclusive PCBs

Hi,

I'm starting a new PCBs GB for Cheff's UP amp and UGS "All Inclusive". The GB has just started on the french forum HCFR.

There are 2 kits : first one with every double sided pcbs, second one with the remaining ones.

Closed, PCBs in production. I will received them around 5th october.

Double-sided kit :
UP (everything) :
-Amp boards (x2)
-Small caps PSU (x2)
-Trigger (x1)
-Vu (x1)

UGS AI :
-UGS (x2)
-Motherboards (right and left)
-µC (x1)
-Logic PSU (x1)
-Triggers (input and output)
-Subwoofer (x1)
-Programmer (x1)

Finishing : 70um copper, 1.6mm thick, HASL, BLACK soldermask

Single-sided kit:
-UGS AI PSU board
-UGS AI XLR/RCA boards (right and left)

Finishing : 35um copper, 1.6mm thick, HASL, BLACK soldermask



It is not possible to order just one board from one kit.
Kits will be delivered on panels, as follows :

An externally hosted image should be here but it was not working when we last tested it.

Single-sided kit is another panel.
Depanelization should be done by yourself. Minimum space between 2 boards is 200mil (4.5mm). The whole board is around 15"*19" (38*48cm).
No V-cutting/Tab routing etc.

Aimed prices:
D kit : 5 orders - 75€ + shipping
...........10 orders - 65€ + shipping
S kit : 5 orders - 35€ + shipping
..........10 orders - 20€ + shipping
Shipping is from France.


Faame - 2 kits - No problems
Cacahuete (hcfr) - 2 kits - OK
Alexoni (hcfr) - 2 kits - OK
Patroussea (hcfr) - 1 kit - OK
Powerdoc (hcfr) - 1 kit - OK
Jacek_k_wawa (diyaudio) - 1 kit - OK
Potepuh (diyaudio) - 1 kit - OK

 Thank's,
Faame
 
Last edited:
F

Faame

Member
Joined 2014
Depanelization should not be hard. A saw is ok. A dremel might be a better choice. There is, in my own opinion, enough space to feel confident. Some extra care is still better obviously :) Just take a piece of paper, draw 2 lines with 4.5mm space between each, you'll see it is OK.

Boards are 1.6mm thick, 2 oz (75 µm) copper, FR4 TG140.

Here is the schematic for the UGS All Inclusive and the 2 missing PCBs:
http://psykok.dyndns.org/diy/preamp_ugs/Atours/Atours.pdf
http://psykok.dyndns.org/diy/preamp_ugs/Atours/AlimSecteur.pdf
http://psykok.dyndns.org/diy/preamp_ugs/Atours/CartesXLRRCA.pdf

A French fellow noticed I forgot one PCB to program the Atmega64 on the µC board. It will be added soon :) (price unchanged)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom