DELAY!!
I am currently awaiting the boards arrival.
The board house unfortunately shipped the circuit boards to another country.
This is a first.
They were unable to get the customs department for that country to re-direct package to me. So the boards are back in production line.
I hope to ship the boards out in less than 2 weeks. My apologies for the delay.
I am currently awaiting the boards arrival.
The board house unfortunately shipped the circuit boards to another country.
This is a first.
They were unable to get the customs department for that country to re-direct package to me. So the boards are back in production line.
I hope to ship the boards out in less than 2 weeks. My apologies for the delay.
GB 2017 #1 Update
Hey All,
I realize that many of you with Reflektor-D, DCG-3 and or DCSTB boards have been waiting quite a long time for your boards. Hopefully this will be remedied by the end of next week.
Although I am responsible for delivery of product, I will state that the typically partnership we have with the board house has been sound for years But here is an explanation that's going on so you do not think I am dead or not being effective in delivery.
First they shipped all the boards to the wrong country, and then were forced to remake them - secondly, they ran out of matte soldermask material for the second order, and so it has been a hang up there. If I do not have them next week, I can fill in with an alternate production house if needed. I can also refund anyone who is not happy or has run out of time for the project based on long delivery times.
I apologize for the delay, but believe the product is worth the patience in dealing with vendors we choose to work with. Hopefully double roadblocks will not be bothersome for some time.
If there are any questions, let me know via private message. Thanks.
Tea
Hey All,
I realize that many of you with Reflektor-D, DCG-3 and or DCSTB boards have been waiting quite a long time for your boards. Hopefully this will be remedied by the end of next week.
Although I am responsible for delivery of product, I will state that the typically partnership we have with the board house has been sound for years But here is an explanation that's going on so you do not think I am dead or not being effective in delivery.
First they shipped all the boards to the wrong country, and then were forced to remake them - secondly, they ran out of matte soldermask material for the second order, and so it has been a hang up there. If I do not have them next week, I can fill in with an alternate production house if needed. I can also refund anyone who is not happy or has run out of time for the project based on long delivery times.
I apologize for the delay, but believe the product is worth the patience in dealing with vendors we choose to work with. Hopefully double roadblocks will not be bothersome for some time.
If there are any questions, let me know via private message. Thanks.
Tea
The current GB for all Salas boards end of 12/3/2017.
I will be sending out private messages to all those on the spreadsheet with payment instructions, so I can send you an invoice.
If you are not on the spreadsheet, please sign up then send me a private message.
After the Group buy closes and boards are ordered, it should be between 4-6 weeks typically for me to get the boards and kits ready, and then to ship them out across the world.
Let me know if there are any questions.
Tea
I will be sending out private messages to all those on the spreadsheet with payment instructions, so I can send you an invoice.
If you are not on the spreadsheet, please sign up then send me a private message.
After the Group buy closes and boards are ordered, it should be between 4-6 weeks typically for me to get the boards and kits ready, and then to ship them out across the world.
Let me know if there are any questions.
Tea
FYI:
I am waiting to hear more from the shipping labeling companies for alternative solutions they intend on using. For now, everything international need to be a first class package.
They start at 15.00, and increase from there.
Overview of changes:
Starting January 21, 2018, First-Class Mail International Service for Flats containing merchandise will no longer be available directly from the USPS. This means that no merchandise (goods) can be mailed using the First-Class Mail International service.
I am waiting to hear more from the shipping labeling companies for alternative solutions they intend on using. For now, everything international need to be a first class package.
They start at 15.00, and increase from there.
Overview of changes:
Starting January 21, 2018, First-Class Mail International Service for Flats containing merchandise will no longer be available directly from the USPS. This means that no merchandise (goods) can be mailed using the First-Class Mail International service.
The reflektor-D Boards are sold out, but I have some of the kits if you only need the parts.
The relektor-Mini and full kits and the DCFlexy boards are currently in stock.
Hi
Is there a kit for the DCFlexy ?
Thanks
Serge
Hi
Is there a kit for the DCFlexy ?
Thanks
Serge
There is not. Salas thought the solutions too variable to do this.
The reflektor-D Boards are sold out, but I have some of the kits if you only need the parts.
Will you be restocking the boards?
Thanks
Will you be restocking the boards?
Thanks
Based on demand.
If you know what you want I can sign you up for it.
The Reflektor-Mini board and kits are still available.
I am designing a DAC and was wondering if this reflektor-D board would do it for me.
I want to have 10mA 3.3VDC output, is it achievable with this board setup with one green LED and a 62R resistor for the 3.3VDC and R1 8R for the 10mA region?
Thanks for the help
I want to have 10mA 3.3VDC output, is it achievable with this board setup with one green LED and a 62R resistor for the 3.3VDC and R1 8R for the 10mA region?
Thanks for the help
Last edited:
I am designing a DAC and was wondering if this reflektor-D board would do it for me.
I want to have 10mA 3.3VDC output, is it achievable with this board setup with one green LED and a 62R resistor for the 3.3VDC and R1 8R for the 10mA region?
Thanks for the help
I do not think Salas intended to run at such a low CCS.
I know with the kits the lowest provided was for 2R.
Certainly can do 3.3V, but if your are talking really low CCS, I think that is missing the intended design. Salas would be able to speak more to it here, or on normal build thread.
- Home
- Group Buys
- GB for Salas Reflektor-D Power Supply for Digital