Primrose(SumR Audio) Toroid GB

[pcb121055]

Man, that's a lot of trannies! Reminds me of living in New Orleans

 

[buzzforb]

Makes me want some coffee to go with.

 

[danielutzu]

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3 (if I am building monoblocks) and 1 x 400VA at 18V for F5Clone; prefer potted for all 3.
danielutzu - 1x800 VA at 18V (for F6); 2x800V at 24V (for a F5T v2 balanced or for a BA3 balanced)

 

[wirewiggler]

danielutzu,
I am not sure why but copied a older list cutting a lot of people who signed up out.

Bill

 

[fudce]

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 18v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 + 14Vx1 / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, 230V Prim. Sec @ 47Vx2 + 14Vx1 / 230V Prim. (GB300D)
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18V (for F6); 2x800V at 24V (for a F5T v2 balanced or for a BA3 balanced)
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)

 

[danielutzu]

thanks wirewiggler - not sure what happened there. Here's the correct updated list:

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 18v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 + 14Vx1 / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, 230V Prim. Sec @ 47Vx2 + 14Vx1 / 230V Prim. (GB300D)
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)

 

[Justadude]

Changed mine from 18 to 22v....

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 + 14Vx1 / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, 230V Prim. Sec @ 47Vx2 + 14Vx1 / 230V Prim. (GB300D)
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)

 

[grimberg]

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 + 14Vx1 / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, 230V Prim. Sec @ 47Vx2 + 14Vx1 / 230V Prim. (GB300D)
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2

 

[buzzforb]

Just to clear things up, SumR and Primrose are not associated with Piltron in any way. I dont want any confusion or misunderstanding. That being said, I think their quality is on par with Piltron and and have had multiple folks give encouragin remarks behind the scenes as to their quality. Here is a link to their website with pics of some of their potted trasformers. I think 600VA is the limit on the potted, but I will make sure. I should be closing this down in about a week, so hopefully we can get the final process started. Primrose has been veru good to work with and I think it will be a positive opportunity for everyone involved.

Primrose Audio - toroid power transformers for audio builders

 

[den054]

If secondaries aren't an issue add me please for:
1 x 400VA@25VACx2 (115/230VAC primary)

I hope shipping to Russian Federation is possible..

Thanks

 

[girbim]

I decided to go a different route with the transformer. I removed my name and added den054 (see post #90) to the list.

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 + 14Vx1 / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, 230V Prim. Sec @ 47Vx2 + 14Vx1 / 230V Prim. (GB300D)
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)

 

[dazed2]

Are you guys ordering the ones with the low noise core or the more efficient regular core ones? Core band? static shield?

 

[zygibajt]

Halo,

Where the trannies will be shipped from? Canada or US? I'm in Europe but have close relatives in Canada so could supply Canadian adress.

Also what VA would you recommend for Aleph J, F3, regular F5 etc?

600VA? 800VA?

I'm using 800VA on Aleph 3 but not sure if it's not overkill, besides it is noisy.

 

[Flodstroem]

Just added some more info to my transformers/order

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)

 

[d to the g]

1x 400VA w/2x18V
2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)

 

[buzzforb]

Add it to the list to make sure it finds its way into the final request

 

[d to the g]

I'm on a cell phone, which pretty much guarantees that something will get screwed up.

Why no google spreadsheet?

 

[buzzforb]

SHould be, but i got 3 going right now. Will work on it this weekend.

 

[d to the g]

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)

 

[triode4]

triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)