Primrose(SumR Audio) Toroid GB - Page 4 - diyAudio
Go Back   Home > Forums > Commercial Sector > Group Buys

Group Buys Members group buys

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st February 2013, 02:00 PM   #31
Ryssen is offline Ryssen  Sweden
diyAudio Member
 
Ryssen's Avatar
 
Join Date: Dec 2003
Location: Sweden--> Here
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA or 1x600VA
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
__________________
Regards Åke
  Reply With Quote
Old 1st February 2013, 03:15 PM   #32
PKI is offline PKI  United States
diyAudio Member
 
PKI's Avatar
 
Join Date: Aug 2011
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA@18V (universal 115/230 primary if possible)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6

it is min 24 already, not bad :-)
  Reply With Quote
Old 1st February 2013, 03:31 PM   #33
billyk is offline billyk  United States
diyAudio Member
 
billyk's Avatar
 
Join Date: Oct 2005
Location: North Central Mass, USA
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA@18V (universal 115/230 primary if possible)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6

Added 2 400VA for myself
  Reply With Quote
Old 1st February 2013, 04:34 PM   #34
tehrkn is offline tehrkn  Greece
diyAudio Member
 
Join Date: Jun 2011
Location: Piraeus
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA@18V (universal 115/230 primary if possible)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
  Reply With Quote
Old 1st February 2013, 08:41 PM   #35
diyAudio Member
 
Join Date: Jan 2011
Location: sitting down
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA@18V (universal 115/230 primary if possible)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
  Reply With Quote
Old 1st February 2013, 10:50 PM   #36
aos is offline aos  Canada
diyAudio Member
 
Join Date: Mar 2007
Isn't 2x24V a bit low for a speaker amp targeting 2X150W (assuming 400VA)?

I ordered two 50VA transformers for a headphone amp a month ago and they look much nicer than the Avel Lindberg that TPA is shipping with Buffalos (one of those had a plastic wrapping that's already unwinding and the wire wrapping precision looks much worse than SumR. SumR is associated with Plitron from what I understand.

Personally I'd certainly prefer drop ship.

Last edited by aos; 1st February 2013 at 10:56 PM.
  Reply With Quote
Old 1st February 2013, 11:00 PM   #37
diyAudio Member
 
buzzforb's Avatar
 
Join Date: Oct 2010
Location: Burlington, NC
24v secondaries is low for 150W.

These are well regarded transformers.

There will be options for shipping. Some may benefit from different scenarios.
__________________
...Shape the sound , Man!
  Reply With Quote
Old 1st February 2013, 11:29 PM   #38
diyAudio Member
 
Join Date: Nov 2009
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA@18V (universal 115/230 primary if possible)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
  Reply With Quote
Old 2nd February 2013, 12:24 AM   #39
Lo_Tse is offline Lo_Tse  Canada
diyAudio Member
 
Join Date: Dec 2006
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA@18V (universal 115/230 primary if possible)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
  Reply With Quote
Old 2nd February 2013, 04:09 AM   #40
diyAudio Member
 
Join Date: Sep 2008
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 or 2 for F6, VA (??)
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI -- 2x400VA@18V (universal 115/230 primary if possible)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: F5X GB chassis and all GB parts Studley Swap Meet 6 21st May 2013 11:47 AM
Kits to start an audio electronics lab GB ashaw Group Buys 0 30th September 2011 01:28 PM
GB for R2R audio volume / input selection pcb danzup Group Buys 147 22nd May 2011 04:42 PM
1kva Toroid GB Sweden widerström Group Buys 0 18th March 2008 09:45 PM
Conrad Heatsinks GB in GB/EU bremen nacht Parts 1 1st February 2006 08:48 PM


New To Site? Need Help?

All times are GMT. The time now is 09:12 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2