Primrose(SumR Audio) Toroid GB - Page 11 - diyAudio
Go Back   Home > Forums > Commercial Sector > Group Buys

Group Buys Members group buys

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st February 2013, 11:32 PM   #101
diyAudio Member
 
buzzforb's Avatar
 
Join Date: Oct 2010
Location: Burlington, NC
PLease add your name to list above until i get a spreadhseet up and running.
__________________
...Shape the sound , Man!
  Reply With Quote
Old 22nd February 2013, 12:28 AM   #102
diyAudio Member
 
Join Date: Oct 2009
Location: MD, USA
Default Added in...

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
nanchangbob - 1 x 800VA 24Vac*2
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)
triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)
  Reply With Quote
Old 22nd February 2013, 01:05 AM   #103
diyAudio Member
 
nanchangbob's Avatar
 
Join Date: May 2009
Location: China
Removed my name from the list. Want to build dual mono's and will wait for Antek.

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)
triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)
Report Post Reply With Quote
__________________
A great day to listen to music.
  Reply With Quote
Old 22nd February 2013, 03:11 AM   #104
labjr is offline labjr  United States
diyAudio Member
 
Join Date: Apr 2003
Location: MA
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
girbim - 1 x 400va@18vx2
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)
triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)
labjr 2 x 400VA @ 18V
  Reply With Quote
Old 22nd February 2013, 03:23 AM   #105
girbim is offline girbim  United States
diyAudio Member
 
Join Date: Sep 2011
Location: Minneapolis, MN
I removed myself a couple of days ago, but I noticed that I reappeared on the list. I am removing my name again.

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)
triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)
labjr 2 x 400VA @ 18V
  Reply With Quote
Old 22nd February 2013, 03:05 PM   #106
zman01 is offline zman01  Bangladesh
diyAudio Member
 
Join Date: Feb 2011
Location: Dhaka
RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
pexo74 1 x 800VA @ 24vx2 (230v)
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)
triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)
labjr 2 x 400VA @ 18V
zman01 - 1 x 600VA @18Vx2 for F6 (115/230 VAC primary)
  Reply With Quote
Old 23rd February 2013, 11:48 AM   #107
pexo74 is offline pexo74  Chile
diyAudio Member
 
Join Date: May 2012
removed my name from the list


RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)
triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)
labjr 2 x 400VA @ 18V
zman01 - 1 x 600VA @18Vx2 for F6 (115/230 VAC primary)
  Reply With Quote
Old 23rd February 2013, 05:52 PM   #108
diyAudio Member
 
Join Date: Oct 2009
Location: MD, USA
Default Added two more...

RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5. And: 2 x 500VA 2x15V Transformers for F5X (not potted)
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V (a 15V 1A additional secondary would make my day)
triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)
labjr 2 x 400VA @ 18V
zman01 - 1 x 600VA @18Vx2 for F6 (115/230 VAC primary)
  Reply With Quote
Old 23rd February 2013, 05:54 PM   #109
diyAudio Member
 
Join Date: Oct 2009
Location: MD, USA
buzzforb, if you don't close this gb soon, my spouse is going to make me sleep in the cold garage very quickly
  Reply With Quote
Old 23rd February 2013, 08:33 PM   #110
diyAudio Member
 
d to the g's Avatar
 
Join Date: Aug 2006
Location: minimalopolis
Quote:
Originally Posted by pexo74 View Post
removed my name from the list


RKH - 2 x 600VA or 2 x 800VA (whatever is best for V3 monoblocks)
Justin - 2 x 600VA
gmant123 - 2 x 400VA
ra7 - 2 x 400VA
Guiness - in for a few no matter what you guys decide
Tea-bag - 1 400va@18v and 800 or 1000@24v
billyK - 800VA 24Vac x 2 - 1 unit, 400VA 24Vac x 2 - 2 units total of 3 units
wirewiggler - 1 400VA X 2 for F6,
qusp - 2 x 400VA
pchw - 1 x 1000VA 24Vac*2
Russellc 1 x 1000VA 24 V x2 (For V2) may be in for 2 more.
PKI — 4x400VA@18Vx2 (universal 115/230 primary voltage)
RDK - 2 x 800VA (for "future proof" v3 mono block)
Skunark - 2x600VA or 2x800VA 24Vac for V3 mono blocks, perhaps 2 more for F6
Ryssen 1x400VA for F6
Tehrkn - 2 x 1000VA@24V
necplusultra - 2 400va@18v and 1 1000@24v
etoiledusoir-1X400va@18v
Lo_tse - 2 x 800VA
pcb121055 - 2 x 1kVA@26x2
vanofmonks - 1 x 400va@18vx2
wjh – 1 x 800VA@24Vacx2
1MOR - 2 x 800va 24V
quan-2x 400VA@45x2(230V)
petefrontiers - 2x 400VA for F5T V2
bugzbunny - 2 x 800 VA at 24V for F5T V3, 1 x 400VA at 18V for F5Clone, 1 x 400 VA for F6 Convertible (not sure about voltage for this one), 1 x 800VA (x2 45V, equiv to Antek AN8445) for the HoneyBadger Amp; prefer potted for all 5.
Mordikai 4x1000va@24v
Mordikai 2x400va@18v
luvdunhill (qty 4) 2 x 22VAC, 350-400VA <= 125mm diameter
alazira 2 x 500VA@15x2
SRMcGee - 1 x 800va @ 24VAC, 1 x 800va @ 32VAC and 2 x 1000va @ 32VAC
BDP (qty 2) 2 x 22VAC, 400VA, potted
jcastellano - 1 x 400va@18vx2
jcon2 -(qty 2) 800VA or 1000VA @ 24va
cristianr - 1 x 800VA@24Vacx2
justadude - qty 1 - 22v @ 400va
Flodstroem 4 x 600VA, sec @ 41Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (Krell KSA100 II monoblocks)
1 x 600VA, Sec @ 47Vx2 (eg. 2 matching secondary outputs) + 14Vx1@1A / 230V Prim. (GB300D) all 5 pcs potted/epoxied
bk856er 1x 800VA @ 24Vx2
danielutzu - 1x800 VA at 18Vx2 (for F6); 2x800VA at 24Vx2 (for a F5T v2 balanced or for a BA3 balanced); all 3 potted, if possible
cefud - 2x800VA @ 24Vx2 (or whatever is best for V3 monoblocks)
Grimberg - 4 x 400VA@18Vx2
den054 - 1 x 400VA@25VACx2 (115/230VAC primary)
d to the g 1x 400VA w/2x18V /2x 400VA w/2x24V, with additional 15V 1A secondary for L'Amp
triode4 - 2 x 1000VA 24 V x2 (For V2), 4 x 400VA 28 V x 2 ,15 V x1(for L'Amp SIT)
labjr 2 x 400VA @ 18V
zman01 - 1 x 600VA @18Vx2 for F6 (115/230 VAC primary)
just updated mine
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: F5X GB chassis and all GB parts Studley Swap Meet 6 21st May 2013 11:47 AM
Kits to start an audio electronics lab GB ashaw Group Buys 0 30th September 2011 01:28 PM
GB for R2R audio volume / input selection pcb danzup Group Buys 147 22nd May 2011 04:42 PM
1kva Toroid GB Sweden widerström Group Buys 0 18th March 2008 09:45 PM
Conrad Heatsinks GB in GB/EU bremen nacht Parts 1 1st February 2006 08:48 PM


New To Site? Need Help?

All times are GMT. The time now is 06:35 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2