Amanero Isolator/Reclocker GB

[acko]

Actually LT1761, ADP150 or similar SOT23-5 chips. Was thinking of LT1763 but not sure other regs have the same soic8 pinouts, just to give more options

You can also connect a 3.3V supply directly to the VDD terminals as shown. In this way there is no need to populate the LDO cct.

 

[neskor]

Acko, Australia X1
RollE2k, Sweden X1
number9, USA X2
Klipschkid, HK, x1
randytsuch, USA X2
grufti, USA X2
kp93300, malaysia x1
Gricko,Croatia x1
NicMac, Italy x2
xtomm, Czech Republic x1
DeanoUK, UK, x2
Lil' Knight, VN x1
smanz, Spain x1
MisterRogers, USA x2
palmito USA x1
tagheuer Canada x1
shoom UK x1
Diyfan, USA x1
TheShaman, Greece x3
LuisMCP, Spain x2
qusp x1
danny_66 x1
meintan x1
mksung x 1
vanwykca UK x1
ccliu, Taiwan x2
leejh x10
bk856er, USA x1
linuxfan, Australia X1
bigpandahk, Hong Kong x 2
rsotirov, Canada x 1
DQ828, Australia x 1
Esl 63, Sweden, x 1
necplusultra Canada x1 (depends on shipping halfway accross the world)
Awh, uk, x1
enantra, Spain x3
mvaldes, Italy x1
SCompRacer, USA x1
t27049215, Taiwan x2
unixdeveloper, USA x1
nik.d, Serbia x1
markus22ch, Switzerland X2
whmok, Singapore x1
vitalica x 2
richard_pc, Taiwan x2
Malvin, USA x1
damohpi, AUS x1
Eric06,France x1
sidiropa, Greece x2
miksi, Serbia x1
glt, USA x1
hochopeper, Aus x1
fredlock, USA X1
Galvani, Country ?? X1
bkdog Australia x1
duc985 Germany x 1
opc Canada x 1
AR2 USA x 2
supra X 2
aos Canada x 1
aronier germany x 2
jjazz Spain x1
neskor Serbia x 1

TOTAL: 93

 

[regal]

Acko, Australia X1
RollE2k, Sweden X1
number9, USA X2
Klipschkid, HK, x1
randytsuch, USA X2
grufti, USA X2
kp93300, malaysia x1
Gricko,Croatia x1
NicMac, Italy x2
xtomm, Czech Republic x1
DeanoUK, UK, x2
Lil' Knight, VN x1
smanz, Spain x1
MisterRogers, USA x2
palmito USA x1
tagheuer Canada x1
shoom UK x1
Diyfan, USA x1
TheShaman, Greece x3
LuisMCP, Spain x2
qusp x1
danny_66 x1
meintan x1
mksung x 1
vanwykca UK x1
ccliu, Taiwan x2
leejh x10
bk856er, USA x1
linuxfan, Australia X1
bigpandahk, Hong Kong x 2
rsotirov, Canada x 1
DQ828, Australia x 1
Esl 63, Sweden, x 1
necplusultra Canada x1 (depends on shipping halfway accross the world)
Awh, uk, x1
enantra, Spain x3
mvaldes, Italy x1
SCompRacer, USA x1
t27049215, Taiwan x2
unixdeveloper, USA x1
nik.d, Serbia x1
markus22ch, Switzerland X2
whmok, Singapore x1
vitalica x 2
richard_pc, Taiwan x2
Malvin, USA x1
damohpi, AUS x1
Eric06,France x1
sidiropa, Greece x2
miksi, Serbia x1
glt, USA x1
hochopeper, Aus x1
fredlock, USA X1
Galvani, Country ?? X1
bkdog Australia x1
duc985 Germany x 1
opc Canada x 1
AR2 USA x 2
supra X 2
aos Canada x 1
aronier germany x 2
jjazz Spain x1
neskor Serbia x 1
regal, USA x1

TOTAL: 94

 

[qusp]

You can also connect a 3.3V supply directly to the VDD terminals as shown. In this way there is no need to populate the LDO cct.

yep, the output in particular could be for instance supplied directly by the same battery bank as the masterclock

ps. not far off my 100 pieces within the week projected total

 

[hochopeper]

ps. not far off my 100 pieces within the week projected total

I lost out, I did say 100 by the end of the first weekend in that email to you just after Acko posted this thread.

 

[qusp]

I think some might be still trying to work out what its for....

 

[duster1]

Acko, Australia X1
RollE2k, Sweden X1
number9, USA X2
Klipschkid, HK, x1
randytsuch, USA X2
grufti, USA X2
kp93300, malaysia x1
Gricko,Croatia x1
NicMac, Italy x2
xtomm, Czech Republic x1
DeanoUK, UK, x2
Lil' Knight, VN x1
smanz, Spain x1
MisterRogers, USA x2
palmito USA x1
tagheuer Canada x1
shoom UK x1
Diyfan, USA x1
TheShaman, Greece x3
LuisMCP, Spain x2
qusp x1
danny_66 x1
meintan x1
mksung x 1
vanwykca UK x1
ccliu, Taiwan x2
leejh x10
bk856er, USA x1
linuxfan, Australia X1
bigpandahk, Hong Kong x 2
rsotirov, Canada x 1
DQ828, Australia x 1
Esl 63, Sweden, x 1
necplusultra Canada x1 (depends on shipping halfway accross the world)
Awh, uk, x1
enantra, Spain x3
mvaldes, Italy x1
SCompRacer, USA x1
t27049215, Taiwan x2
unixdeveloper, USA x1
nik.d, Serbia x1
markus22ch, Switzerland X2
whmok, Singapore x1
vitalica x 2
richard_pc, Taiwan x2
Malvin, USA x1
damohpi, AUS x1
Eric06,France x1
sidiropa, Greece x2
miksi, Serbia x1
glt, USA x1
hochopeper, Aus x1
fredlock, USA X1
Galvani, Country ?? X1
bkdog Australia x1
duc985 Germany x 1
opc Canada x 1
AR2 USA x 2
supra X 2
aos Canada x 1
aronier germany x 2
jjazz Spain x1
neskor Serbia x 1
regal, USA x1
duster1, Estonia x1

TOTAL: 95

 

[TheShaman]

I think some might be still trying to work out what its for....

Is it edible?

 

[DQ828]

You can also connect a 3.3V supply directly to the VDD terminals as shown. In this way there is no need to populate the LDO cct.

"as shown" ? where?

 

[qusp]

erm, on the PCB, VDD is marked on the PCB

 

[esl 63]

Acko, Australia X1
RollE2k, Sweden X1
number9, USA X2
Klipschkid, HK, x1
randytsuch, USA X2
grufti, USA X2
kp93300, malaysia x1
Gricko,Croatia x1
NicMac, Italy x2
xtomm, Czech Republic x1
DeanoUK, UK, x2
Lil' Knight, VN x1
smanz, Spain x1
MisterRogers, USA x2
palmito USA x1
tagheuer Canada x1
shoom UK x1
Diyfan, USA x1
TheShaman, Greece x3
LuisMCP, Spain x2
qusp x1
danny_66 x1
meintan x1
mksung x 1
vanwykca UK x1
ccliu, Taiwan x2
leejh x10
bk856er, USA x1
linuxfan, Australia X1
bigpandahk, Hong Kong x 2
rsotirov, Canada x 1
DQ828, Australia x 1
necplusultra Canada x1 (depends on shipping halfway accross the world)
Awh, uk, x1
enantra, Spain x3
mvaldes, Italy x1
SCompRacer, USA x1
t27049215, Taiwan x2
unixdeveloper, USA x1
nik.d, Serbia x1
markus22ch, Switzerland X2
whmok, Singapore x1
vitalica x 2
richard_pc, Taiwan x2
Malvin, USA x1
damohpi, AUS x1
Eric06,France x1
sidiropa, Greece x2
miksi, Serbia x1
glt, USA x1
hochopeper, Aus x1
fredlock, USA X1
Galvani, Country ?? X1
bkdog Australia x1
duc985 Germany x 1
opc Canada x 1
AR2 USA x 2
supra X 2
aos Canada x 1
aronier germany x 2
jjazz Spain x1
neskor Serbia x 1
regal, USA x1
duster1, Estonia x1

TOTAL: 94


[Deleted my board, new plans]

 

[acko]

Actually LT1761, ADP150 or similar SOT23-5 chips. Was thinking of LT1763 but not sure other regs have the same soic8 pinouts, just to give more options

You can also connect a 3.3V supply directly to the VDD terminals as shown. In this way there is no need to populate the LDO cct.

yep, the output in particular could be for instance supplied directly by the same battery bank as the masterclock

Good idea . External (isolated) 3.3V from DAC side or elsewhere is usually available. Might even remove the LDO cct to make more room for ground plane coverage on this tiny board

 

[aos]

There's nothing here specific to Amanero, right? This can be used with any USB audio module that outputs I2S?

 

[hochopeper]

Yes that is correct, The only Amanero specific thing is that header stacks neatly on the Amanero.

Designed to physically match the Amanero as shown. Could also be used connect to other transports like WaveIO, EX2UI, Hiface for similar benefits. Wire in the inputs.

 

[MrSlim]

what the hell.. what's one more project on the stack...

Acko, Australia X1
RollE2k, Sweden X1
number9, USA X2
Klipschkid, HK, x1
randytsuch, USA X2
grufti, USA X2
kp93300, malaysia x1
Gricko,Croatia x1
NicMac, Italy x2
xtomm, Czech Republic x1
DeanoUK, UK, x2
Lil' Knight, VN x1
smanz, Spain x1
MisterRogers, USA x2
palmito USA x1
tagheuer Canada x1
shoom UK x1
Diyfan, USA x1
TheShaman, Greece x3
LuisMCP, Spain x2
qusp x1
danny_66 x1
meintan x1
mksung x 1
vanwykca UK x1
ccliu, Taiwan x2
leejh x10
bk856er, USA x1
linuxfan, Australia X1
bigpandahk, Hong Kong x 2
rsotirov, Canada x 1
DQ828, Australia x 1
necplusultra Canada x1 (depends on shipping halfway accross the world)
Awh, uk, x1
enantra, Spain x3
mvaldes, Italy x1
SCompRacer, USA x1
t27049215, Taiwan x2
unixdeveloper, USA x1
nik.d, Serbia x1
markus22ch, Switzerland X2
whmok, Singapore x1
vitalica x 2
richard_pc, Taiwan x2
Malvin, USA x1
damohpi, AUS x1
Eric06,France x1
sidiropa, Greece x2
miksi, Serbia x1
glt, USA x1
hochopeper, Aus x1
fredlock, USA X1
Galvani, Country ?? X1
bkdog Australia x1
duc985 Germany x 1
opc Canada x 1
AR2 USA x 2
supra X 2
aos Canada x 1
aronier germany x 2
jjazz Spain x1
neskor Serbia x 1
regal, USA x1
duster1, Estonia x1
MrSlim, Canada x 1

TOTAL: 95

 

[KlipschKid]

Someone mentioned before that the flip flop could be set to double the clock freq... will this be possible ?

 

[nvduybom]

Acko, Australia X1
RollE2k, Sweden X1
number9, USA X2
Klipschkid, HK, x1
randytsuch, USA X2
grufti, USA X2
kp93300, malaysia x1
Gricko,Croatia x1
NicMac, Italy x2
xtomm, Czech Republic x1
DeanoUK, UK, x2
Lil' Knight, VN x1
smanz, Spain x1
MisterRogers, USA x2
palmito USA x1
tagheuer Canada x1
shoom UK x1
Diyfan, USA x1
TheShaman, Greece x3
LuisMCP, Spain x2
qusp x1
danny_66 x1
meintan x1
mksung x 1
vanwykca UK x1
ccliu, Taiwan x2
leejh x10
bk856er, USA x1
linuxfan, Australia X1
bigpandahk, Hong Kong x 2
rsotirov, Canada x 1
DQ828, Australia x 1
necplusultra Canada x1 (depends on shipping halfway accross the world)
Awh, uk, x1
enantra, Spain x3
mvaldes, Italy x1
SCompRacer, USA x1
t27049215, Taiwan x2
unixdeveloper, USA x1
nik.d, Serbia x1
markus22ch, Switzerland X2
whmok, Singapore x1
vitalica x 2
richard_pc, Taiwan x2
Malvin, USA x1
damohpi, AUS x1
Eric06,France x1
sidiropa, Greece x2
miksi, Serbia x1
glt, USA x1
hochopeper, Aus x1
fredlock, USA X1
Galvani, Country ?? X1
bkdog Australia x1
duc985 Germany x 1
opc Canada x 1
AR2 USA x 2
supra X 2
aos Canada x 1
aronier germany x 2
jjazz Spain x1
neskor Serbia x 1
regal, USA x1
duster1, Estonia x1
MrSlim, Canada x 1
nvduybom, VietNam x 1

TOTAL: 96

 

[qusp]

Is it edible?

what colour is it?

 

[acko]

Amanero Isolator Re-Clocker

Here is the final preview of the set of 2 boards for this GB. One with conventional FFs and the other with PotatoChips.
Boards are on 0.8mm thick FR4 material with green solder mask and immersion gold finish.

Price for a set: USD 25
Shipping: USD 10 (worldwide-std airmail)

Paypal fees and charges included

I will be sending PM to those on the list shortly. This will take a while. GB will be kept open until orders are sorted.
Thank you for your patience

 

[bk856er]

Received my (single) potatochip a few days ago.

Looks like I need two chips?

BK