Amanero Isolator/Reclocker GB

[qusp]

no, it means he is supplying 2 versions one with Ti flip-flops, one with pot-semi. the pot-semi version requires more involved layout due to higher speed. This is why I kept harping on about not using them without a proper PCB, or even a ground plane.

both will have all functionality afaik

lol snap!

[bigpandahk]

You mean either the isolator chip or the FF can perform both functions?

[hochopeper]

No.

Mean the different choices of flip-flops. You could build two and compare subjective performance of different flip-flops of you would like.

Qusp, how's it feel being beaten by a guy typing on a mobile phone?

[acko]

Acko, Australia X1
RollE2k, Sweden X1
number9, USA X2
Klipschkid, HK, x2
randytsuch, USA X2
grufti, USA X2
kp93300, malaysia x1
Gricko,Croatia x1
NicMac, Italy x2
xtomm, Czech Republic x1
DeanoUK, UK, x2
Lil' Knight, VN x1
smanz, Spain x1
MisterRogers, USA x2
palmito USA x1
tagheuer Canada x1
shoom UK x1
Diyfan, USA x1
TheShaman, Greece x1
LuisMCP, Spain x2
qusp x1
danny_66 x1
meintan x1
mksung x 1
vanwykca UK x1
ccliu, Taiwan x2
leejh x10
bk856er, USA x1
linuxfan, Australia X1
bigpandahk, Hong Kong x 2
rsotirov, Canada x 1
DQ828, Australia x 1
Esl 63, Sweden, x 1
necplusultra Canada x1 (depends on shipping halfway accross the world)
Awh, uk, x1
enantra, Spain x3
mvaldes, Italy x1
SCompRacer, USA x1
t27049215, Taiwan x2
unixdeveloper, USA x1
nik.d, Serbia x1
markus22ch, Switzerland X2
whmok, Singapore x1
vitalica x 2
richard_pc, Taiwan x1
Malvin, USA x1
damohpi, AUS x1
Eric06,France x1
sidiropa, Greece x2
miksi, Serbia x1
glt, USA x1
hochopeper, Aus x1
fredlock, USA X1

Total 78

[acko]

Originally Posted by bigpandahk

That means you will supply individual board for isolation and re-clocking, not single board for both functions? Have you tried the Potsemi FF for re-clock? ....

Originally Posted by hochopeper

No.

Mean the different choices of flip-flops. You could build two and compare subjective performance of different flip-flops of you would like.

Both versions have identical isolator cct on board. Hope this clarifies.

[acko]

Originally Posted by KlipschKid

Thank you ! Just to confirm.... this one ?

7474 G Series GHz TTL CMOS Logic IC 14PIN SOIC Qty 1 | eBay

PDF

http://www.potatosemi.com/potatosemi...t/PO74G74A.pdf

Yes, this one!

[KlipschKid]

Originally Posted by acko

Yes, this one!

Great, thank you !

BTW, I'll be up for 2 Potato Semi boards, and I'd be surprised if you sell any of the others.

[Galvani]

I'm in x1 !

[hochopeper]

Originally Posted by KlipschKid

Great, thank you !

BTW, I'll be up for 2 Potato Semi boards, and I'd be surprised if you sell any of the others.

I think you've misunderstood how panellising works. When Acko says he will panellise the boards. He means that you will get a one board that probably has a v-cut down the middle to split off the two separate designs. If you want two of the potsemi boards I think you'll need to order two sets. I thought you were keen on the free chips that will suit the other design? The higher speed potato semi chips may cause issues if the signals following the flip flop through to the DAC chip are less than well implemented.


Chris

[KlipschKid]

Originally Posted by hochopeper

I think you've misunderstood how panellising works. When Acko says he will panellise the boards. He means that you will get a one board that probably has a v-cut down the middle to split off the two separate designs. If you want two of the potsemi boards I think you'll need to order two sets. I thought you were keen on the free chips that will suit the other design? The higher speed potato semi chips may cause issues if the signals following the flip flop through to the DAC chip are less than well implemented.


Chris

I've definitely got my wires twisted here. What would happen if I bought one board ? Would it be the Potato ? And if I buy a second, it has to be the other variant ? If so, I'm going down to one board, or up to three.