Go Back   Home > Forums > Commercial Sector > Group Buys

Group Buys Members group buys

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 20th October 2012, 06:42 AM   #231
diyAudio Member
 
voxxonline's Avatar
 
Join Date: Aug 2012
Location: Bexleyheath, Kent
Send a message via Skype™ to voxxonline
Where exactly stereo signal divided then ?
__________________
Motorsport + diy audio
Anybody for Brighton audio show 29 30 March?
  Reply With Quote
Old 20th October 2012, 06:46 AM   #232
qusp is offline qusp  Australia
diyAudio Member
 
qusp's Avatar
 
Join Date: Oct 2009
Location: Brisbane, Australia
in the mentioned mini DSP, or you could do it in software such as allocator. the crossover and attenuation/volume control is all digital at that point. the dacs have nothing to do with it other than providing separate channels
  Reply With Quote
Old 20th October 2012, 07:52 AM   #233
diyAudio Member
 
voxxonline's Avatar
 
Join Date: Aug 2012
Location: Bexleyheath, Kent
Send a message via Skype™ to voxxonline
Red a bit about minidsp. excessive solution though If I need Only split signal.
__________________
Motorsport + diy audio
Anybody for Brighton audio show 29 30 March?
  Reply With Quote
Old 20th October 2012, 08:30 AM   #234
diyAudio Member
 
Join Date: Aug 2012
Added myself for 2 x ( SE kit + PSU kit) with 2 additionnal psu
Very happy your birthday wasn't earlier in October !

Last edited by Boggy62; 20th October 2012 at 08:41 AM.
  Reply With Quote
Old 20th October 2012, 10:01 AM   #235
mj777 is offline mj777  Philippines
diyAudio Member
 
Join Date: Dec 2010
Location: dubai
I have added one set for me.
regards,
mj777
  Reply With Quote
Old 20th October 2012, 03:37 PM   #236
jerry g is offline jerry g  Uzbekistan
diyAudio Member
 
Join Date: Aug 2005
I pre ordered one kit se plus psu

please keep me in the loop

Jerry G
  Reply With Quote
Old 20th October 2012, 04:12 PM   #237
qusp is offline qusp  Australia
diyAudio Member
 
qusp's Avatar
 
Join Date: Oct 2009
Location: Brisbane, Australia
Quote:
Originally Posted by voxxonline View Post
Red a bit about minidsp. excessive solution though If I need Only split signal.
huh? you clearly have some more reading to do. there is more to a good crossover to stopping a woofer signal at 1200Hz and starting the tweeter at 1200Hz

unless I misunderstand, what do you need to split te signal for?
  Reply With Quote
Old 20th October 2012, 06:46 PM   #238
diyAudio Member
 
Join Date: Jan 2012
Quote:
Originally Posted by jean-paul View Post
Incredible. The number keeps getting higher and no one except Subbu And I knows what the design will be. Scary.... Earlier on I told Subbu that demand could very well be 500 pieces of which I later on thought I had exaggerated but now it seems the 500 number was not so exaggerated at all.

We are still in design phase. Despite earlier comments the boards seems to become slightly larger with all the in and outputs aligned at one side except for the power supply connector. So finally SPDIF and L + R are all at the backside of the case. Decoupling already was good but we tried to improve it slightly by adding coils and caps. Different sizes output filter caps can be used.

I am working from dusk till dawn in my new home (moving houses/emigration) so I try to arrange time in 5 minute blocks but we will manage a V3.

We won't let you down. Hey the simplest solution would have been a rerun of V2.6 but that is still possible if V3 does not perform as we wish.


Hi there!

I really appreciate your work on this device, but I think all of us would rather wait a little bit more for a near perfect and improved board then a Board which does have design flaws due to fast and hasting designing.

Take your time all of you who are involved in the development. And maybe some beers!
Even if I and all of us can not wait anymore, TAKE YOUR TIME, TAKE YOUR TIME!

Greetings from germany!
Ron
  Reply With Quote
Old 20th October 2012, 06:49 PM   #239
diyAudio Moderator Emeritus
 
jean-paul's Avatar
 
Join Date: Sep 2002
Location: Germany
Keine Angst Ron. We will take the time necessary to make it a good V3. Today I finished a new revision but many will follow I guess. We try to incorporate some handy features.
__________________
It's only audio. Official member of the Norske Brillegeit Gang.

Last edited by jean-paul; 20th October 2012 at 07:00 PM.
  Reply With Quote
Old 20th October 2012, 11:10 PM   #240
diyAudio Member
 
Join Date: Aug 2009
Default I agree

Quote:
Originally Posted by jean-paul View Post
Keine Angst Ron. We will take the time necessary to make it a good V3. Today I finished a new revision but many will follow I guess. We try to incorporate some handy features.
To reiterate what ron said.. Take your time. I finished build the v2.6 SE board and have been very happy with the results. Just pacing myself while I build 2 balanced versions. I know you guys do this as a hobby and you have lives outside of this site.

Great job guys!!

For all the other waiting for v3.x , it'll be worth the wait.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ES9023 / WM8804 S/PDIF DAC Group Buy unixdeveloper Group Buys 680 24th January 2014 04:05 PM
Power Supply PCB for ES9023 / WM8804 S/PDIF DAC Group Buy unixdeveloper Group Buys 145 29th July 2013 12:55 PM
WTB ES9023 DAC PCB by Subbu & Jean-Paul Reima Swap Meet 5 18th December 2012 07:39 PM
ES9023 / WM8804 S/PDIF DAC Parts GB EU Only korben69 Group Buys 187 10th October 2012 11:25 AM
Case for "ES9023 / WM8804 S/PDIF DAC Group Buy" rvrazvan Digital Source 2 11th June 2012 08:38 AM


New To Site? Need Help?

All times are GMT. The time now is 07:38 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2