I have been asked via PM for PCBs and matched devices only.
We have an agreement with DIY Audio forum that we shall only offer PCB together with the case GB.
If you want PCB only, you should contact DIY Audio directly, since we promised to give them exclusive rights.
They have all the updated Gerber files, so they can get them made any time.
As to match devices, since we have not yet had time to match ours yet, I suggest you get them from Nic (see end of this thread) :
http://www.diyaudio.com/forums/group-buys/210792-gb-np-matched-toshiba-2sk1530-2sk201-f5x.html
or Spencer :
http://www.diyaudio.com/forums/swap-meet/221380-fs-toshiba-2sk1530-y-2sj201-y.html
Thank you for your interest,
Patrick
We have an agreement with DIY Audio forum that we shall only offer PCB together with the case GB.
If you want PCB only, you should contact DIY Audio directly, since we promised to give them exclusive rights.
They have all the updated Gerber files, so they can get them made any time.
As to match devices, since we have not yet had time to match ours yet, I suggest you get them from Nic (see end of this thread) :
http://www.diyaudio.com/forums/group-buys/210792-gb-np-matched-toshiba-2sk1530-2sk201-f5x.html
or Spencer :
http://www.diyaudio.com/forums/swap-meet/221380-fs-toshiba-2sk1530-y-2sj201-y.html
Thank you for your interest,
Patrick
April 2013 is still realistic, though we'll try our best.
Work in progress costs us money, so we want to finish early as well.
The entire China / Hong Kong area will come to a halt for at least 2 weeks around Chinese New Year, which is beginning of February.
The machined parts are unlikely to finish before then.
On top of that we have to allow time for any cosmetic rework, brushing and anodising.
And we have to match over 5000 FETs. And that would take time (about 10 per hour).
So please be patient. This is already n-times faster than Batch 1.
They just got their FETs recently (their self-organised GB).
Patrick
Work in progress costs us money, so we want to finish early as well.
The entire China / Hong Kong area will come to a halt for at least 2 weeks around Chinese New Year, which is beginning of February.
The machined parts are unlikely to finish before then.
On top of that we have to allow time for any cosmetic rework, brushing and anodising.
And we have to match over 5000 FETs. And that would take time (about 10 per hour).
So please be patient. This is already n-times faster than Batch 1.
They just got their FETs recently (their self-organised GB).
Patrick
We are happy to announce that we can show some progress.
We test assembled the first sample case of the second batch today.
Everything fitted together as planned, perfectly.
Apart from some cosmetic issues that needs sorting out, we declare ourselves happy.
One of the pictures shows the new, properly dimensioned regulator heatsink.
Some of the Batch 1 guys would be jealous .....
Patrick
We test assembled the first sample case of the second batch today.
Everything fitted together as planned, perfectly.
Apart from some cosmetic issues that needs sorting out, we declare ourselves happy.
One of the pictures shows the new, properly dimensioned regulator heatsink.
Some of the Batch 1 guys would be jealous .....
Patrick
Attachments
As long as properly dimensioned heatsink is an available upgrade to Batch 1 subscribers there is no need to be jealous - unless Batch 2 subscribers gets it first
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.