Roender's FC-100 Rev.1 Group-Buy - Page 24

Rudi_Ratlos · 17th September 2012, 05:42 PM

@Tagheuer, Bastian,

it looks like you are planning to build mono-blocks.

You only need the Soft-Power-On - PCB, if you switch on one (several) transformer(s) with a total capacity of more than 500W
with a single Power-On-Switch to delimit the inrush-current.

Do you really need 4 SPO-PCBs?

Best regards - Rudi_Ratlos

joshvi · 17th September 2012, 05:45 PM

Lucky Bastian

joshvi

pinnocchio · 17th September 2012, 06:44 PM

I'd like to be on the GB as well

2x AMP PCB
2x Shunt PCB
1x Soft Power-on PCB
2x 0R1 resistors
2x Matched sets of NJL0281/NJL0302
2x capacitor MKP 1839

Thanks
Do

tagheuer · 07:15 PM

Quote:

Originally Posted by Rudi_Ratlos

@Tagheuer, Bastian,

it looks like you are planning to build mono-blocks.

You only need the Soft-Power-On - PCB, if you switch on one (several) transformer(s) with a total capacity of more than 500W
with a single Power-On-Switch to delimit the inrush-current.

Do you really need 4 SPO-PCBs?

Best regards - Rudi_Ratlos

Hi Rudi,

I plan to build two pair of monoblocks, so it will require one soft power-on in each chassis.

I also have sent the payment to your paypal account.

Thanks for the GB.

Rudi_Ratlos · 18th September 2012, 07:01 AM

Ferry: I received your PAYPAL transfer. Thank you.

Find enclosed the current order list.

Best regards - Rudi_Ratlos

Jazzzz · 18th September 2012, 08:35 AM

Yes, i'm a very proud owner of Rudis TO3-Symasym! And let me tell you, it's a beautiful amp. Since then it's actually my only one! That's why I'm even more excited

And i can't recommend his service more! (Is this proper english?)
The boards are one of the finest i've ever seen and his service and assistance is simply brilliant! So for everyone who's here for the first time: You're at the right place! Ok, enough adulation

@Rudi: Yes, my plan was to build 4 mono blocks and i really like the option to use nearly every switch to turn them on. But your comment got me thinking. Maybe it's time to build a stereo one. Ok, so then i only need 2 SPO. Thank you.

Best regards,
Basti

Fabrizio72 · 18th September 2012, 09:02 AM

Quote:

Originally Posted by Rudi_Ratlos

Fabrizio,

when you open (register to) a PAYPAL account, you are asked to give an EMail address (this is YOUR PAYPAL-ID) and your home-address.
These informations are part of your PAYPAL - profile.

...

P.S. Fabrizio: may I ask you to "try" this right now? You will then be the 1st one to pay me.

Rudi, all apper clear, now. I plan to send You the money in a couple of days!
Fab

micro · 18th September 2012, 09:21 AM

Hi Rudi,

Could you put this order on your GB list ?

2 AMP PCB
2 Shunt PCB
2 LS Protect PCB
1 Soft Power-on PCB
2 NJL0281/NJL0302

Location Croatia

Thanks.

JethroTull · 18th September 2012, 10:56 AM

Hi Rudi.

Can you add me to the GB list with these parts?

2x Amp PCBs
2x Shunt PCBs
2x NJLs Matched sets
2x MKP1839

Thanks and best regards!
Francisco

jszjsz · 02:27 PM

Hallo Rudi,

I just realised that I do not need the LSProtect and the Soft-Power-On PCBs. Please remove them from the list and I send you the money immediately.

Many thanks for the GB!

Janos

17th September 2012, 06:44 PM	#233
pinnocchio Just DIY! diyAudio Member Join Date: Sep 2010 Location: Montreal	I'd like to be on the GB as well 2x AMP PCB 2x Shunt PCB 1x Soft Power-on PCB 2x 0R1 resistors 2x Matched sets of NJL0281/NJL0302 2x capacitor MKP 1839 Thanks Do __________________ PREAMPs : AMB α10 + JC-80 clone \| Balanced DCB1 \| AMPs: AMB β24 \| Aleph 5 \| Symef \| Hiraga \| ML-2 \| Fetzilla \| Telos 390 Clone DACs : TPA Buffalo II + NTD1 I/V \| TPA OPUS + IVY III Speakers : Jim Holtz Statements \| Astasia SD \| Tubasson Mark 2

18th September 2012, 02:13 PM	#240
jszjsz diyAudio Member Join Date: Dec 2007 Location: Schopfheim, Germany	Hallo Rudi, I just realised that I do not need the LSProtect and the Soft-Power-On PCBs. Please remove them from the list and I send you the money immediately. Many thanks for the GB! Janos Last edited by jszjsz; 18th September 2012 at 02:27 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tea-Bag's IXYS Depletion Mosfet Group and SemiSouth R100 JFET group buy.	Tea-Bag	Group Buys	330	20th May 2013 01:03 PM
Roender's FC-100 prototype and builder's thread	Rudi_Ratlos	Solid State	751	10th May 2013 12:31 PM
Sanyo/B&O Icepower 200AC Rev.D, schematic about rev. engin., not complete finished	tiefbassuebertr	Class D	34	1st April 2013 01:54 PM
Online vendors for Panasonic FC 1000/100 caps?	analog_sa	Parts	2	14th February 2007 02:19 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th September 2012, 05:45 PM	#232
joshvi diyAudio Member Join Date: Oct 2008	Lucky Bastian joshvi

18th September 2012, 08:35 AM	#236
Jazzzz diyAudio Member Join Date: Jun 2007	Yes, i'm a very proud owner of Rudis TO3-Symasym! And let me tell you, it's a beautiful amp. Since then it's actually my only one! That's why I'm even more excited And i can't recommend his service more! (Is this proper english?) The boards are one of the finest i've ever seen and his service and assistance is simply brilliant! So for everyone who's here for the first time: You're at the right place! Ok, enough adulation @Rudi: Yes, my plan was to build 4 mono blocks and i really like the option to use nearly every switch to turn them on. But your comment got me thinking. Maybe it's time to build a stereo one. Ok, so then i only need 2 SPO. Thank you. Best regards, Basti

18th September 2012, 09:21 AM	#238
micro diyAudio Member Join Date: Mar 2008	Hi Rudi, Could you put this order on your GB list ? 2 AMP PCB 2 Shunt PCB 2 LS Protect PCB 1 Soft Power-on PCB 2 NJL0281/NJL0302 Location Croatia Thanks.

18th September 2012, 10:56 AM	#239
JethroTull diyAudio Member Join Date: Mar 2011	Hi Rudi. Can you add me to the GB list with these parts? 2x Amp PCBs 2x Shunt PCBs 2x NJLs Matched sets 2x MKP1839 Thanks and best regards! Francisco