|23rd June 2012, 07:44 AM||#182|
Join Date: Mar 2009
kannan_s (USA) Received
Bksabath (UK) Received
FdW (NL) Received
BarryBlue (UK) Received
Amplifire (France) Received
rellum (France) Received
NicMac (Italy) Received
WK (Finland) Received
Geofd (Switzerland) Received
John Luckins (UK) Received
Swalter (Switzerland) Received
ilardi (USA) Received
herb1diaz (USA) Received
ymwong (USA) Received
Cobra2 (Norway) Received
styrkv (Norway) Received
Presbel (Philippines) Received
pchw (USA) Received
CeeVee (Portugal) Received
igwt (USA) Received
BDL (Romania) Received
Tommyss123 (Norway) Payment Instructions sent
Gusto142 (Netherlands) Received
jkuetemann (Canada) Received
qusp (Australia) Payment Instructions sent
lll (Greece) Received
secanbj (Sweden) Received
APK (UK) Received
Alazira (USA) Received
neb001 (USA) Received
vladco (USA) Received
JBdV (NL) Received
jhcamp (IT) Received
dshambala (USA) Received
sonidos (USA) Received
pwla0516 (Taiwan) Payment Instructions sent
gellen (USA) Received
papyfan (France) Received
leejh (Korea) Received
prooptiki (Greece) Payment Instructions sent
fbalducci (Italy) Received
carpin (Netherlands) Received
Groundloops (Germanistan) Shipped
andreas w. (Germany) Shipped
cddumat (germany) Shipped
Leatherface (Germany) Shipped
Apollo2mond (Germany) Shipped
Lo_tse (Canada) Payment Instructions sent
LHQuam (USA) Received
Waiting List: Cancelled due to Locky_z offering the curve Tracer through eBay
|26th June 2012, 06:25 PM||#183|
Join Date: Mar 2010
Location: Olalla, Oregon: Land of the 100 Valleys
Device not found
Has anyone tried to run the curve tracer under Wine in Linux? I have the curve tracer connected to a USB port, powered at 32 volts and the USB/RS232 switch set to USB. When I click on "Auto Detect & Get Parameter" the response is "Device not Found".
Linux lsusb -v detects the device.
Bus 005 Device 006: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
idVendor 0x067b Prolific Technology, Inc.
idProduct 0x2303 PL2303 Serial Port
iManufacturer 1 Prolific Technology Inc.
iProduct 2 USB-Serial Controller
I am investigating further, but there appear to be problems running the curve tracer thru Linux/Wine.
|27th June 2012, 06:45 AM||#184|
Join Date: Jun 2004
I had no linux,and had not test under linux.
You can also use the following steps to determine the MCU is working.
Use a wire short the three X,Y,Z socket and power-on, and you will hear 7～8 relay sounds.This mean the MCU is working.
And the communication speed will automatic set to 2880bps.
|27th June 2012, 03:04 PM||#185|
Join Date: Mar 2009
I have very little experience with Linux and especially Wine, but I believe that with any hardware you need to install the Linux driver package for the USB interface (PL2303 chip) under Linux for it to be able to communicate with the software (even if it's running under under wine-dows)
You'd probably have better chance on a Linux support forum.
Look for installation of the PL2303 chip
Alternatively, try with the RS232 interface..
|15th April 2013, 05:25 PM||#189|
Join Date: Mar 2009
After several months closing this group buy, I (re-)discovered that I still have two curve tracers available.
Same conditions as 1st post apply.
Note: one of the curve tracers is in France, so I especially recommend to German DIYers (and maybe other European Union fellows) as it can avoid the customs issue of shipping from China
Please PM me if anyone is interested
|24th November 2013, 01:36 PM||#190|
Join Date: Nov 2011
I have one of these which I never used and never will. If anybody wants it, send me a pm.
I'm that guy who finds ways *not* to do things..
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|DIY Curve Tracer for PC||locky_z||Solid State||470||22nd May 2015 06:13 AM|
|DIY Curve Tracer||avincenty||Tubes / Valves||354||2nd January 2013 01:33 AM|
|curve tracer?||maxpou||Solid State||4||24th October 2009 06:29 PM|
|Wanted Diy curve tracer!||amc32||Car Audio||1||19th October 2009 06:52 AM|
|DIY tube testing Curve Tracer||whitelabrat||Tubes / Valves||5||24th October 2007 10:11 PM|
|New To Site?||Need Help?|