GB for Salas SSHV2 regulator
This is a group buy for the purchase of the second generation Salas Shunt High Voltage Regulator.
It's a newer design that Salas did, with CRT brilliant layout work and a bunch of us prototyped over the holiday season. We had a zero percent failure rate of setups amongst us. (Which I consider great, as most of my work , well needs work)
Let's get to the point.
The board is $12 USD.
Shipping is $7 for up to 3 boards
Shipping is $9 for up to 6 boards.
Some may note the increase US has to incur with our local post office. Sorry
Mini-Kits will be available. The cost is higher than I wanted them to be - so I split them in two.
One will include the transistors, diodes and LED, mica and washer. 3 2SK117GRs will be provided for best matching per kit.
The other will include the resistors and the potentiometer Vishay T93YA model which is 100ppm. The rest of the resistors are lower PPM as reasonable. This is $8.00. These of course are optional purchases, and feel free to roll your favorites here, although I recommend a low PPM 68K.
Heatsinks, caps and Molex connectors are not included - although if there is enough strife, we can consider a GB for those as well
Again a disclaimer - this is the most dangerous product I have shipped yet. Failure to respect the high voltage of the product can have deadly consequences. This is not a beginners project!
The full specifications are in the PDF file. (attached as zip)
The google spreadsheet needs to be completed with your username and includes paypal payment details. Please don't post that address here.
Transistor Minikit 10 USD
3-Toshiba 2SK117's unmatched
3-Vishay 12V .5W Zener
2-20ma Red LED's
2-TO-220 Mica Insulator
2-Keystone plastic washers
Resistor Minikit 8 USD
2- Welwyn 68K 2W 50ppm
1-KOA M/F 1/4W 100ppm 1.82R
1-T93YA Vishay/Fernice trimmer 1/2W 100ppm 200R
1-T93YA Vishay/Fernice trimmer - 1/2W 100ppm 1K
3-271 Series Xicon 1/4W 50ppm 100R
1-271 Series Xicon 1/4W 50ppm 10R
1-271 Series Xicon 1/4W 50ppm 1.8k
1-271 Series Xicon 1/4W 50ppm 470R
1-271 Series Xicon 1/4W 50ppm 220R
I`m up for three boards.
It is now linked in my signature.
Just paid for:
Thanks for your efforts, looking forward to receive the goods.
payment sent for 6 SSHV2 boards plus shipping sent.
Please - make sure to include what you want for parts, # of boards and kits, plus diyaudioname and kits!!
Thanks again for doing these group buys.
I'm interested in 6 boards with both parts options included. Would shipping to Australia (post code 3175) be possible? If so, how much should I pay for shipping?
just paid for 6 x PCB and 1 x shipping. thanks!
|All times are GMT. The time now is 11:34 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2013 DragonByte Technologies Ltd.
Copyright ©1999-2013 diyAudio