GB for Salas SSHV2 regulator

[Tea-Bag]

274-1AB Wakefield | Mouser

This is the one used. Others did not fit well.

[rickmcinnis]

I will give those a try but those ones in the picture are very attractive.

Thanks very much for the recommendation.

[skyraider]

Salas, Tea-bag, mine has run-in for few weeks now. This is a keeper, thanks again for making the kit available.

Just to share with the guys who are too lazy to go through the hundreds of discussion page (like me initially;-)), C2 is audible, worth spend some moolah here. And don't exceed 15uF!

[roger57]

Originally Posted by skyraider

Salas, Tea-bag, mine has run-in for few weeks now. This is a keeper, thanks again for making the kit available.

Just to share with the guys who are too lazy to go through the hundreds of discussion page (like me initially;-)), C2 is audible, worth spend some moolah here. And don't exceed 15uF!

What caps did you test that could fit there? What were the main differences?
Gary

[merlin el mago]

Originally Posted by roger57

What caps did you test that could fit there? What were the main differences?
Gary

Better SQ.

[roger57]

Originally Posted by merlin el mago

Better SQ.

Thanks for you input Merlin, but the question was directed at the poster.

Gary

[skyraider]

Hi Roger, I used electrolytics initially but now its replaced with Vishay MKP, RS code 684-2251.

[roger57]

Originally Posted by skyraider

Hi Roger, I used electrolytics initially but now its replaced with Vishay MKP, RS code 684-2251.

Interesting. I used these:
B32794D2106K EPCOS Inc | 495-4135-ND | DigiKey

Which are also MKP series, metallized polypropylene. Have low ESR. Not sure what the difference would be between them. Are these ones that someone tried?

Gary

[Guiness]

Added to the list....
Thanks

[pidigi]

Salas, Mike,

I received the kits, thank you very much for your time and work!

All the best,

Paolo