Discrete Low Jitter Clock GB

[chungtat]

Hi Anton,

I would like to order:

4 x Bare PCB

Thanks a lot.


Regards,
Tat

 

[syklab]

Hi Anton,
1 x Bare PCB, about USD3.00 each
1 x Kit for 220 - 240VAC powered version, about USD35 each

Thanks

 

[goldkenn]

Return buyer from the first round, now order:
1 x Bare PCB, about USD3.00 each
2 x Kit for 220 - 240VAC powered version, about USD35 each

Thanks

 

[h-wan]

output level 3.3V?

Hi Anton,
is an output level of 3.3V possible?
The Oppo BDP 83 needs 27MHz with 3.3V.

Many thanks for the information.

 

[amc184]

@h-wan: Alter resistor R205 to lower the supply voltage to the comparator. The AD8561 doesn't swing to its positive rail, so you probably don't want to reduce it to 3.3V. Try 1.8kR or 2.2kR and see what the output level is like. I can't make any guarantees, I didn't characterise the clock for that situation. For you reference, here's what the levels are like with a 5V supply to the comparator (as standard):

 

[amc184]

It's now the end of the month, and I'm closing the group buy. I'm still waiting on the PCBs, they have just shipped and should be here in a week.

I'm intending on doing things in the same way I did them last time. I'll start taking payments now. Those who have ordered only PCBs will have their order shipped as soon as I get their payment and the PCBs, those who have ordered kits will have their order shipped as soon as I get their payment and the PCBs and the components. I'll order the components this week.

Please make PayPal payments to the address shown in the picture (I'm trying to avoid spambots). Please make sure your payment has the address you'd like you PCBs/kits shipped to attached, and include you DIYAudio.com username in the comments. Here is the total cost for each participant:

- tagheuer, excluding shipping: USD66, total: USD75.55
- badrisuper, excluding shipping: USD46, total: USD57.62
- s3tup, excluding shipping: USD60, total: USD70.79
- zjaakco, excluding shipping: USD43, total: USD54.41
- WALTER BURKHARD, excluding shipping: USD36, total: USD46.79
- mravinsky, excluding shipping: USD66, total: USD76.79
- unixdeveloper, excluding shipping: USD9, total: USD18.55
- h-wan, excluding shipping: USD9, total: USD19.79
- Aleks1, excluding shipping: USD36, total: USD46.79
- Mikewong, excluding shipping: USD15, total: USD24.55
- korben69, excluding shipping: USD9, total: USD19.79
- ymwong, excluding shipping: USD66, total: USD75.55
- lil' kinght, excluding shipping: USD6, total: USD15.55
- jameshillj, excluding shipping: USD30, total: USD35.64
- chungtat, excluding shipping: USD12, total: USD21.55
- skylab, excluding shipping: USD43, total: USD53.04
- goldkenn, excluding shipping: USD83, total: USD95.04

The shipping above is just basic airmail, and I'm sending them at your risk. I'm more than happy to send them by a tracked service, please PM me if that's what you'd prefer. I'd recommend doing that if you're country has an unreliable postal service.

If I've left your name off, or you think I've got your order wrong, please PM me.

Thanks,
Anton

 

[h-wan]

Hi Anton,
many thanks for the information.
I'll try it.

Payment is done.

Helmut

 

[syklab]

Hi Anton,

Payment done.

Thanks

 

[amc184]

Thanks for the payments so far, here's where we're at:

- tagheuer: paid, address supplied
- badrisuper: waiting for payment
- s3tup: paid, address supplied
- zjaakco: paid, address supplied
- WALTER BURKHARD: waiting for payment
- mravinsky: waiting for payment
- unixdeveloper: waiting for payment
- h-wan: paid, address supplied
- Aleks1: waiting for payment
- Mikewong: waiting for payment
- korben69: waiting for payment
- ymwong: waiting for payment
- lil' kinght: waiting for payment
- jameshillj: waiting for payment
- chungtat: waiting for payment
- skylab: paid, address supplied
- goldkenn: waiting for payment

There is also a bit of a problem. I've found that the supplied who I got the crystals from for the last groupbuy has now stopped selling them. I can still get name brand 11.2896MHz crystals, but it looks like I'm going to have to supply generic 16.9344MHz and 33.8688MHz crystals.

 

[jameshillj]

Paypal still not functioning - will try again later

 

[amc184]

Another update:

- tagheuer: paid, address supplied
- badrisuper: waiting for payment
- s3tup: paid, address supplied
- zjaakco: paid, address supplied
- WALTER BURKHARD: paid, address supplied
- mravinsky: waiting for payment
- unixdeveloper: paid, address supplied
- h-wan: paid, address supplied
- Aleks1: waiting for payment
- Mikewong: waiting for payment
- korben69: waiting for payment
- ymwong: waiting for payment
- lil' kinght: waiting for payment
- jameshillj: paid, address supplied
- chungtat: waiting for payment
- skylab: paid, address supplied
- goldkenn: waiting for payment

The parts for the kits have started to arrive.

 

[Ryssen]

I want a DC kit if it´s not to late..

 

[amc184]

@Ryssen: I think there will be at least one DC kit left over. I'll contact you after the groupbuy and let you know.

 

[Ryssen]

Ok.

 

[mravinsky]

Paid yesterday.

 

[chungtat]

Hi,

Payment is sent. Thanks.

 

[amc184]

An update on where we are at:

- tagheuer: paid, address supplied
- badrisuper: waiting for payment
- s3tup: paid, address supplied
- zjaakco: paid, address supplied
- WALTER BURKHARD: packed
- mravinsky: paid, address supplied
- unixdeveloper: packed
- h-wan: packed
- Aleks1: waiting for payment
- Mikewong: waiting for payment
- korben69: waiting for payment
- ymwong: waiting for payment
- lil' kinght: waiting for payment
- jameshillj: paid, address supplied
- chungtat: paid, address supplied
- skylab: paid, address supplied
- goldkenn: waiting for payment

I'm still waiting on the PCBs to arrive, they should be here next week.

 

[mstr]

Hi Anton,

is it too late to join the Group-Buy? If there are still kits left, please count me in for 1 x kit for 7 - 20VDC powered version and 2 x Bare PCB.

Thanks, Michael

 

[amc184]

The PCBs arrived in New Zealand on Friday, but didn't reach me. I should have them tomorrow.

@mstr: Unfortunately you have missed the groupbuy. However, there will be PCBs leftover, and possible some DC kits. I'll contact you after the groupbuy and let you know if there are any kits left.

 

[ymwong]

Hello..

Payment made. Sorry for the delay.

ym