SEN / CEN All JFET IV Converter Evaluation Pack - Page 34

necplusultra · 31st January 2012, 12:20 PM

payment sent for quad set and heatsink
thanks.

qusp · 31st January 2012, 12:35 PM

no problem, easy done

EUVL · 31st January 2012, 04:27 PM

2SK369V matched set payment status as below.

Mravinsky__Paid
Murdoc_____Paid
heinz1_____Paid
AlanEldsin____Paid
David Fritzgerald____Sent
necplusultra____Paid
thorstenlarsen___pending

Patrick

Emphrygian · 2nd February 2012, 10:40 AM

If you have an extra set of SK369Vs, or if Thorsten falls through, I'd like one.

EUVL · 04:08 PM

We should have.
I'll check for you. Will take a while till I can reach Mark.
But I am pretty sure we have at least one set left.

Patrick

MarkLai · 4th February 2012, 01:44 AM

2SK369V matched set status as below.
Those paid are sent by reg. air mail today.
Mravinsky__Paid__sent
Murdoc_____Paid___sent
heinz1_____Paid___sent
AlanEldsin____Paid___sent
David Fritzgerald____Sent
necplusultra____Paid___sent
thorstenlarsen___pending

Have fun!
Mark

EUVL · 4th February 2012, 04:08 AM

Emührygian,

Please PM MarkLai for Payment details if you still want to have a set.

Thanks,
Patrick

qusp · 4th February 2012, 05:33 AM

i've started putting together a modified Jung reference from his paper build an ultra-low-noise voltage reference. will see how i go with it because its designed for >10 using the reference in the BOM. ive had much of my workshop packed in desiccant for the last week and a half due to my workshop flooding and getting crazy rain, didnt want a repeat of last year so i packed it up. so back on the horse after a trying week and i hope to present a simple reference using a LT ref and opa1641, as well as the jung design provided i can get the AD797 stable without a proper PCB at unity gain in the coming week.

i'm building this ahead of schedule before its needed, for the groups benefit, my appologies for the extra time, but i ask for your patience.

Emphrygian · 6th February 2012, 11:31 AM

Quote:

Originally Posted by EUVL

Emührygian,

Please PM MarkLai for Payment details if you still want to have a set.

Thanks,
Patrick

Thanks!

BTW, will there be any adverse effects from using 2x9.6V NiMH battery packs per CEN/SEN apart from a little higher dissapation? 9.6V packs last significantly longer than regular 9V (8.4V) NiMH batteries, so they seem like a much more attractive solution.

EUVL · 6th February 2012, 02:48 PM

No ill effect. Just watch your dissipation / cooling.

Patrick

31st January 2012, 04:27 PM	#333
EUVL diyAudio Member Join Date: Oct 2003	2SK369V matched set payment status as below. Mravinsky__Paid Murdoc_____Paid heinz1_____Paid AlanEldsin____Paid David Fritzgerald____Sent necplusultra____Paid thorstenlarsen___pending Patrick __________________ xen-audio.com

2nd February 2012, 03:56 PM	#335
EUVL diyAudio Member Join Date: Oct 2003	We should have. I'll check for you. Will take a while till I can reach Mark. But I am pretty sure we have at least one set left. Patrick __________________ xen-audio.com Last edited by EUVL; 2nd February 2012 at 04:08 PM.

4th February 2012, 04:08 AM	#337
EUVL diyAudio Member Join Date: Oct 2003	Emührygian, Please PM MarkLai for Payment details if you still want to have a set. Thanks, Patrick __________________ xen-audio.com

6th February 2012, 02:48 PM	#340
EUVL diyAudio Member Join Date: Oct 2003	No ill effect. Just watch your dissipation / cooling. Patrick __________________ xen-audio.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st January 2012, 12:20 PM	#331
necplusultra diyAudio Member Join Date: Jan 2011 Location: sitting down	payment sent for quad set and heatsink thanks.

31st January 2012, 12:35 PM	#332
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	no problem, easy done

2nd February 2012, 10:40 AM	#334
Emphrygian diyAudio Member Join Date: Mar 2007	If you have an extra set of SK369Vs, or if Thorsten falls through, I'd like one.

4th February 2012, 01:44 AM	#336
MarkLai diyAudio Member Join Date: Oct 2007	2SK369V matched set status as below. Those paid are sent by reg. air mail today. Mravinsky__Paid__sent Murdoc_____Paid___sent heinz1_____Paid___sent AlanEldsin____Paid___sent David Fritzgerald____Sent necplusultra____Paid___sent thorstenlarsen___pending Have fun! Mark

4th February 2012, 05:33 AM	#338
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	i've started putting together a modified Jung reference from his paper build an ultra-low-noise voltage reference. will see how i go with it because its designed for >10 using the reference in the BOM. ive had much of my workshop packed in desiccant for the last week and a half due to my workshop flooding and getting crazy rain, didnt want a repeat of last year so i packed it up. so back on the horse after a trying week and i hope to present a simple reference using a LT ref and opa1641, as well as the jung design provided i can get the AD797 stable without a proper PCB at unity gain in the coming week. i'm building this ahead of schedule before its needed, for the groups benefit, my appologies for the extra time, but i ask for your patience.

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
Murdoc

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zen -> Cen -> Sen, evolution of a minimalistic IV Converter	EUVL	Digital Source	865	Today 09:24 AM
Jfet IV with regulator pcb for sale	spencer	Swap Meet	16	9th January 2008 04:00 AM
Oh no! Not another discrete IV converter	philpoole	Digital Source	33	23rd October 2007 09:54 PM
How far can IV converter be from DAC?	philpoole	Digital Source	7	30th April 2007 03:05 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read