GB: Salas Shunt for Squeezebox

mravlca · 17th July 2011, 11:20 PM

Hello!

This thread is for anyone interested in shunt Squeezebox power supply!
The PCB you can see in the attachment, it has 4*4700uF/16V, remote sense and wider tracks to withstand the current. With values that are in schematic you are able to get 2.6A, which is quite enough, even for the new device, Squeezebox touch!
The price for one board is 15€+5€ worldwide shipping, paypal fee included.

Best Regards,
Ales

Salas · 17th July 2011, 11:32 PM

I don't remember having given my consent publicly or privately for that. Did you ever try that for real by the way? 1A rectification diodes for a 2.6A circuit?

qusp · 18th July 2011, 07:50 AM

thats pretty bad form

boycott

mravlca · 18th July 2011, 08:12 AM

Quote:

Originally Posted by Salas

Did you ever try that for real by the way? 1A rectification diodes for a 2.6A circuit?

Yes I have tried it and it works great

. Those 1A MUR120 were just used in schematic. I have used byv29!

woodturner-fran · 18th July 2011, 09:51 AM

Thread should be removed - op, you need to ask salas for permission to use his design. Otherwise this is very poorly received here.

merlin el mago · 18th July 2011, 10:22 AM

Quote:

Originally Posted by Salas

I don't remember having given my consent publicly or privately for that. Did you ever try that for real by the way? 1A rectification diodes for a 2.6A circuit?

Quote:

Originally Posted by qusp

thats pretty bad form

boycott

Quote:

Originally Posted by woodturner-fran

Thread should be removed - op, you need to ask salas for permission to use his design. Otherwise this is very poorly received here.

+1

Sergelisses · 18th July 2011, 03:35 PM

In fact it is SALAS who must decide the appropriate action !!!!!

Serge

mravlca · 18th July 2011, 04:16 PM

Guys don't be so harsh with me! I apologized to Salas and again I am apologizing to him here. He said that he doesn't endorse this GB, therefore I will not proceed with it!

BR,
Ales

p.s. Anyone can make a mistake!

Pano · 18th July 2011, 04:34 PM

Thread closed.

18th July 2011, 09:51 AM	#5
woodturner-fran diyAudio Member Join Date: Jan 2006 Location: Ireland	Thread should be removed - op, you need to ask salas for permission to use his design. Otherwise this is very poorly received here. __________________ Visit www.tirnahifi.org!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GB Thread for Salas SSR1.1 BiB shunt reg	Tea-Bag	Group Buys	903	26th May 2012 08:45 AM
FS : 2 x Salas low shunt Group-design by Salas	korben69	Swap Meet	7	9th November 2011 10:06 PM
My PCB design of Salas SHunt Reg	Lazybutt	Power Supplies	24	14th July 2011 04:11 PM
Salas low shunt Group-design by Salas	quanghao	Group Buys	785	31st May 2011 05:48 PM
Wtd: Salas shunt reg boards	RichLund	Swap Meet	1	23rd April 2010 10:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

17th July 2011, 11:32 PM	#2
Salas diyAudio Chief Moderator Join Date: Oct 2002 Location: Athens-Greece	I don't remember having given my consent publicly or privately for that. Did you ever try that for real by the way? 1A rectification diodes for a 2.6A circuit?

18th July 2011, 07:50 AM	#3
qusp Sometimes a square peg fits a round hole just fine diyAudio Member Join Date: Oct 2009 Location: Brisbane, Australia	thats pretty bad form boycott

18th July 2011, 03:35 PM	#7
Sergelisses diyAudio Member Join Date: Nov 2003 Location: Near PARIS	In fact it is SALAS who must decide the appropriate action !!!!! Serge

18th July 2011, 04:16 PM	#8
mravlca diyAudio Member Join Date: Jul 2009 Location: Ljubljana	Guys don't be so harsh with me! I apologized to Salas and again I am apologizing to him here. He said that he doesn't endorse this GB, therefore I will not proceed with it! BR, Ales p.s. Anyone can make a mistake!

18th July 2011, 04:34 PM	#9
Pano diyAudio Moderator Join Date: Oct 2004 Location: North Carolina Blog Entries: 4	Thread closed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)