• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

PCB for cascoded IXYS CCS (tube)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): don't know yet, I think 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2

BTW: it would be nice to start a GB for parts, too... :cannotbe:
 
Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): don't know yet, I think 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2

Grazie e continua così.
Guglielmo
 
I got a quotation from the manufacturer. now we are at ~58boards and it will require 3 panels (20 boards per panel) costing 96euro each.

60 boards = 3x96 euro + shipping (+20% VAT if I'll have them shipped to Italy) -> 6.8euro/brd

if we can reach 124 boards we can cut down the costs to 300euro (a single big panel) for 124 boards

124 boards = 300 euro + shipping (+VAT) -> 3.4euro

prices would be a bit cheaper if shipped to USA but I will stay here until the end of July.

C'MOOON .. where are all the buyers that got the IXYS fets from the other GB? I can easily increase my qty if there are enough buyers to reach the price break.
 
depending on actual price i may take 6,


Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): don't know yet, I think 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6 , gluca, please hold on to my cash balance...thanks
 
Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
 
I'm in for 4 mate

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4

Cheers
 
I'm in for 6

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6

Thank you Luca:)
 
6 for me please

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6

Thanks!
 
6 for me please

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6
siang (Taiwan): 6

Thanks!
 
6 for me!

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6
siang (Taiwan): 6
Ryssen (Sweden):6
Thanks!
 
Gluca,

If this pcb can work with IXTP01N100D on lower fet, please add 10 pcs. for me.

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6
siang (Taiwan): 6
Ryssen (Sweden):6
Sugarn (Thailand) : 10
 
6 for me!

Jaap (Netherland) : 4
gmant123 (Argentina): 10
SigFire (Germany): 4-6
au-trovaille (Netherlands): 4
BDL (Romania): 4
Polin (Italy): 2
Gluca (USA/Italy): 10
Cyteen (UK): 2
Bas (Netherland) : 4
pso (Spain) : 2
Sinuko (Italy) : 4
UnixMan (Italy) : 2
Joseph_k (Hungary/Italy) : 2
guglielmope (Italy) : 2
tony(Philippines) : 6
bravi (New Zealand) : 6 or 12
Dagwood (New Zealand) : 4
10y (Italy) : 6
dr.strangelove3 (Netherlands): 6
siang (Taiwan): 6
Ryssen (Sweden):6
Sugarn (Thailand) : 10
ccliu (Taiwan): 6
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.