GB Thread for Salas SSR1.1 BiB shunt reg

Tea-Bag · 09:13 PM

The group buy is for an updated Low Voltage shunt reg designed by Salas.
The GB is a working and approved relationship between myself, CRT and Salas.

The board will consist of three different reg's on one board. The board is V-Scored and can be broken into three boards, two boards etc.

On each full board there is a two positive regs and one negative rail reg.

I have included pics of the boards (Prototype, minor change in final design)

I have also included my two built versions of the reg. One running at 15v dual rail, and one tuned to 43v. I built this using one 'board'.

The boards will sell for $19 each, with $6 minimum shipping, paypal only, no extra fees. (Calculates down to $8.33 per reg cost including shipping).
The group buy sign up sheet will be on my signature.

The current GB end date has not been set (5/5/2011)

Salas has written a build guide, URL below. It will explain more technical details.

SALAS REG SSR v1.1 BIB GUIDE REV2

massimo · 14th May 2011, 08:44 AM

Shipping cost 6 up to 3 pcbs/8 USD up to 6 domestic and overseas?
ETA?

ramallo · 09:13 AM

Add me to the list with two boards.

BR

lil' knight · 14th May 2011, 09:48 AM

Would it be possible to use these with the Buffalo DAC?

Tea-Bag · 14th May 2011, 10:29 AM

Quote:

Originally Posted by massimo

Shipping cost 6 up to 3 pcbs/8 USD up to 6 domestic and overseas?
ETA?

Shipping will generally be $6 dollars for up to 2-3 full sets (lets call them that for less confusion. After that, likely 8 USD for more.
This includes domestic and overseas shipping. I try to provide the same cost to everyone. It usually works out.

Tea-Bag · 14th May 2011, 10:31 AM

Quote:

Originally Posted by lil' knight

Would it be possible to use these with the Buffalo DAC?

Sure can. I believe some of the older boards are being used with a Buffalo Dac.
This will provide more options.

Tea-Bag · 14th May 2011, 10:34 AM

First round GB end June 30th 2011. Should be able to pay up until that day.

merlin el mago · 14th May 2011, 11:36 AM

Quote:

Originally Posted by lil' knight

Would it be possible to use these with the Buffalo DAC?

Are you using Tridents?

Salas · 14th May 2011, 01:20 PM

In this version any Vref drift is downwards going.

samoloko · 14th May 2011, 01:31 PM

why there Is no IRF240 / 9240 - can I use them
also what Is current limit

14th May 2011, 08:55 AM	#3
ramallo diyAudio Member Join Date: Nov 2004 Location: Madrid	Add me to the list with two boards. BR __________________ Happiness is a warm soldering iron Last edited by ramallo; 14th May 2011 at 09:13 AM.

14th May 2011, 09:48 AM	#4
lil' knight diyAudio Member Join Date: Dec 2009	Would it be possible to use these with the Buffalo DAC? __________________

14th May 2011, 10:34 AM	#7
Tea-Bag not politcally affiliated diyAudio Member Join Date: Feb 2006 Location: Kennebunk Blog Entries: 5	First round GB end June 30th 2011. Should be able to pay up until that day. __________________ DCB1/BiB Sign up Sheet Round #2 2012 CLICK HERE\|SSHV2 Shipping\| F5TConvertible Circuit Board Sign Up Sheet (Shipping)CLICK HERE\|Semisouth R100A/R085 available PM

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OLD THREAD Salas low voltage shunt regulator (V 1.0)for DAC	quanghao	Quanghao Audio Design	15	16th July 2010 05:05 AM
Wtd: Salas shunt reg boards	RichLund	Swap Meet	1	23rd April 2010 10:28 PM
Ikoflexer's advanced shunt regulator (GB thread)	Bas Horneman	Group Buys	8	30th March 2010 12:12 AM
Modified Salas Mosfet Shunt Reg	mach1	Tubes / Valves	2	18th December 2008 05:36 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th May 2011, 08:44 AM	#2
massimo diyAudio Member Join Date: Dec 2002 Location: Milan, Italy	Shipping cost 6 up to 3 pcbs/8 USD up to 6 domestic and overseas? ETA?

14th May 2011, 01:20 PM	#9
Salas diyAudio Chief Moderator Join Date: Oct 2002 Location: Athens-Greece	In this version any Vref drift is downwards going.

14th May 2011, 01:31 PM	#10
samoloko diyAudio Member Join Date: Jun 2006	why there Is no IRF240 / 9240 - can I use them also what Is current limit

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read