GB Thread for Salas SSLV1.1 BiB shunt reg - Page 39

william2001 · 21st July 2011, 10:52 PM

yeah, see here: http://www.diyaudio.com/forums/group...ml#post2586946

Tea-Bag · 21st July 2011, 11:41 PM

Quote:

Originally Posted by necplusultra

is it possible that each kit I received had 2 extra sk117 and 3 extra leds?

It's in one's best interest to measure the IDSS of all your 2SK's. Try to use 3-5mv ones only if possible. If you got to use higher IDSS one's the build guide mentions where to stuff them

zenesh · 22nd July 2011, 02:29 AM

Got my boards!

they look great

Gricko · 22nd July 2011, 04:11 AM

My boards arrived today. They look great!!!Thank you Tea-Bag,Salas and CRT!

merlin el mago · 22nd July 2011, 09:36 AM

Quote:

Originally Posted by necplusultra

is it possible that each kit I received had 2 extra sk117 and 3 extra leds?

Yes, me too thanks to Tea-Bag

necplusultra · 22nd July 2011, 10:56 AM

I was so eager to start filling the board that I did not measure the 117's. I'll desolder and measure those. Leds are not yet soldered in. I skipped over some of the guide so lesson learned is RTFM.

thanks for info and the kits TB & Salas

LucasAdamson · 22nd July 2011, 11:23 AM

Haha - I just deciphered RTFM. True indeed.

Tea-Bag · 22nd July 2011, 12:18 PM

I used to work with a guy who's licence plate was RTFM.

LucasAdamson · 22nd July 2011, 12:28 PM

For those of us not native English speakers, it roughly translates to

"read the manual"

AndrewT · 22nd July 2011, 12:43 PM

I'm a native english speaker and I didn't know.
But then again, I don't use language like that

22nd July 2011, 11:23 AM	#387
LucasAdamson diyAudio Member Join Date: Feb 2009	Haha - I just deciphered RTFM. True indeed. __________________ Lucas

22nd July 2011, 12:18 PM	#388
Tea-Bag not politcally affiliated diyAudio Member Join Date: Feb 2006 Location: Kennebunk Blog Entries: 7	I used to work with a guy who's licence plate was RTFM. __________________ Salas Boards 2014 #1 Boards on Order \|F5TC board and power supplies available PM

22nd July 2011, 12:28 PM	#389
LucasAdamson diyAudio Member Join Date: Feb 2009	For those of us not native English speakers, it roughly translates to "read the manual" __________________ Lucas

22nd July 2011, 12:43 PM	#390
AndrewT diyAudio Member Join Date: Jul 2004 Location: Scottish Borders	I'm a native english speaker and I didn't know. But then again, I don't use language like that __________________ regards Andrew T.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st July 2011, 10:52 PM	#381
william2001 diyAudio Member Join Date: Sep 2001 Location: Midwest	yeah, see here: http://www.diyaudio.com/forums/group...ml#post2586946

22nd July 2011, 02:29 AM	#383
zenesh diyAudio Member Join Date: Jun 2007	Got my boards! they look great

22nd July 2011, 04:11 AM	#384
Gricko diyAudio Member Join Date: Apr 2009 Location: Zagreb	My boards arrived today. They look great!!!Thank you Tea-Bag,Salas and CRT!

22nd July 2011, 10:56 AM	#386
necplusultra diyAudio Member Join Date: Jan 2011 Location: sitting down	I was so eager to start filling the board that I did not measure the 117's. I'll desolder and measure those. Leds are not yet soldered in. I skipped over some of the guide so lesson learned is RTFM. thanks for info and the kits TB & Salas

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GB: Salas Shunt for Squeezebox	mravlca	Group Buys	8	18th July 2011 05:34 PM
My PCB design of Salas SHunt Reg	Lazybutt	Power Supplies	24	14th July 2011 05:11 PM
Wtd: Salas shunt reg boards	RichLund	Swap Meet	1	23rd April 2010 11:28 PM
Modified Salas Mosfet Shunt Reg	mach1	Tubes / Valves	2	18th December 2008 06:36 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read