> I assume it lines up with the existing holes...
It lines up with existing holes for the diodes underneath the CRC heatsink, not the cradle.
The Regulator heat sink will have the same mounting holes.
The rectifier board has no standoffs to the heatsink.
It is held by 8 recitifer legs, which I consider rigid enough.
If you definitely want standoffs, we can make the board wider and provide two extra holes.
You then have to drill the heat sink yourself.
But I honestly do not see such need.
Patrick
It lines up with existing holes for the diodes underneath the CRC heatsink, not the cradle.
The Regulator heat sink will have the same mounting holes.
The rectifier board has no standoffs to the heatsink.
It is held by 8 recitifer legs, which I consider rigid enough.
If you definitely want standoffs, we can make the board wider and provide two extra holes.
You then have to drill the heat sink yourself.
But I honestly do not see such need.
Patrick
> I assume it lines up with the existing holes...
It lines up with existing holes for the diodes underneath the CRC heatsink, not the cradle.
The Regulator heat sink will have the same mounting holes.
The rectifier board has no standoffs to the heatsink.
It is held by 8 recitifer legs, which I consider rigid enough.
If you definitely want standoffs, we can make the board wider and provide two extra holes.
You then have to drill the heat sink yourself.
But I honestly do not see such need.
Patrick
Thanks Patrick.
sorry John ...
Hahaha, all good sir!
Gentlemen,
1 set is 4 pieces for two channels / 1 amplifier case.
Most of them has only one case.
While we are happy to supply, do you really need double the amount ?
Patrick
Maybe in anticipation of the regulator heatsink and fast change between the CRC and regulator heatsink?
If it has the same mounting locations, seems like you should be able to move the rectifiers over to the new CRC heatsink. In either case, maybe I'll add a spare set myself too.
Horio, USA - 4 Sets
NicMac, EU - 2 Sets
Johnwmclean, AUST - 2 Sets
JBdV, EU - 4 Sets
APK, UK - 2 Sets
Mravinsky, EU - 2 Sets
pchw, US - 2 Sets
Horio, USA - 4 Sets
NicMac, EU - 2 Sets
Johnwmclean, AUST - 2 Sets
JBdV, EU - 4 Sets
APK, UK - 2 Sets
Mravinsky, EU - 2 Sets
pchw, US - 2 Sets
Maybe John can help us to send the other guys a email, if only just to alert them ?
Thanks,
Patrick
Consider it done!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Potential Other Group Buys related to EUVLs F5X