DX BLame ES, ST, MKII, MKII Supercharged Groub Buy Interest

[Rudi_Ratlos]

Carlos,

I am offering the "Gold-and-Red" PCBs, you own yourself, nothing else.



These PCBs are verified and certificated.

Best regards - Rudi_Ratlos

[destroyer X]

And i have them here.

regards,

Carlos

[Dave S]

Hi Rudi,

Are you aware of the concerns over embrittlement of solder joints to gold surfaces?:
http://www.goldbulletin.org/assets/f...sworth_3_4.pdf

What is the thickness of the gold flash and what material is underneath?

I have some LMP solder that has 3% silver, this is supposed to reduce the problem somewhat, unfortunately I don't have much left and it's expensive to buy. Anyway hopefully the plating is thin and it's not an issue.

[Andy1967]

Tudo bem Carlos,

Been reading and watching vids on the DX amps and I was hoping that you could answer these questions:

Are there any Supercharged PCB left for sale? I am also interested in buying the PSU and speaker protection PCBs for a stereo amp.

Is there a final latest version of the component list and assembly guide for the different models, or should I just go to your Homepage?

And finally a crazy question (that only Danes will ask) Is it possible to buy all the components from you or someone you recommend, as a kit so to speak?

I am really looking forward to this project.

And by the way, I've been to Brasil twice, and looking forward to come visit again.

Obrigardo,
Andy

[Rudi_Ratlos]

Andy, I am sorry to tell you that I do no longer have any PCBs of Carlos' AMPs.

Best regards - Rudi_Ratlos

[Andy1967]

Thank you for your reply Rudi.
If I can't get hold on the PCBs then can you recommend other kits with the same potential?

[Rudi_Ratlos]

I will send you a PM, Andy, and recommend you to go for Michael Bittner's SYMASYM as an alternative solution.

Best regards - Rudi_Ratlos

[MagnumOpus]

Any mk3 hx ånd psu boards left?

[Rudi_Ratlos]

No. I do not have any PCBs left.
Best regards - Rudi_Ratlos

[destroyer X]

He produced some samples a few monthes ago..... also Supercharged blue boards, i am not sure if he still have.... go directly to him:

imap.eletro@gmail.com

Be aware he may not answer you fast, he make repairs in high voltage electrical lines (power transmission of energy) and he use to be travelling to check towers.

Another one that may have pcboards is Juan Vargas:

vargasmongo@gmail.com

Mitchel can produce Dx Blame ST and also Supercharged... all these folks are authorized to distribute, and i do not control them..they do whatever they want to do:

miguelnabuco@terra.com.br

Mitchel (Miguel Nabuco) has a site where you have all you may need to know about the Supercharged, if you want to etch by yourself at home, i do not have the adress in this computer (i'm at work) he can point you the link.

Symassym is a great option too, Rudi have assembled both and he like the Symassym a lot....i have assembled many years ago and the amplifier is great..also Roender amplifier is great too.

Rudi has all the tool to order production of his lovely red boards..this depends on orders and his own will to do it.

I do prefere mine ones, but naturally i am biased..... of course!

regards,

Carlos