PCB order for Goldmun clone - Page 33

bigpanda · 6th March 2011, 03:29 PM

Hi folks,

Finish checking the traces and there is nothing wrong with the white silkscreen version. The only thing you have to worry is the pad holes that I mentioned in the document filed at the link in the previous post. If you can get components with thinner leads, you might not even have to do the drilling. If you use the 16A relays, you don't have to modified the D. These boards are ready. Please follow the instruction exactly to by-pass these faults. Save Mr. Earth from another pile of pcbs where we can still use them.

bigpanda · 19th March 2011, 02:50 AM

Wonder if anyone is still looking for the BUZ900 / 905 pair for the Goldmund clone project (or others?)
.
I can get them @ $18 / pair. For 6 pair that would be $108 + $14 shipping & RMS + $8 for paypal charge. Total $130 for a set (6pairs) for this project. Need 10-12 (sets) orders for a go-ahead. LT for supplier = 5-6 weeks. + 2 weeks from me to you. Total time from your order confirmation may be over 10 weeks

Others not on this projects can also place order. Even # of pairs please. (cost varies from 6 pairs of course)

Please send email order to tony_chan_cf@email.com

Subject : "BUZ900/905 order"
Content :

<forum ID>, <paypal ID>, <# of pairs>, <Country of destination>

Please do not send money to tony_chan_cf at paypal and wait for my billing.

Mailing method :

1) If mailed by 3 seperate packages (4pcs each pack) by RMS, the parcel value is well covered by the max claim value and the declaration value (I would declare only 1/2 price) would not lure the custom officers.

2) If mailed by single package with insurance (if service is available to your area and most should be), full value will have to be declared and that might draw the custom officers' attention. This method could be cheaper but you might (just might) end up with additional taxation that together cost higher than the 1st method.

Still looking for LSK389A.
Got some Omron G8P for this project too.

BP

Pocoyo · 21st March 2011, 10:39 AM

I'm interested for the boards
If any boards left pls give it to me

Best regards, jeffry

bigpanda · 21st April 2011, 11:12 PM

Hi,

For those who have asked me to 'reserve' boards for them, I think it is time to settle your reservation.

BP

Pocoyo · 10th May 2011, 03:49 PM

Hi Big Panda

after i looks your pdf file & picture maybe i cancel the order
im not an expert engineer but just build for hobby
( I blew up the simple lm 3886

)

Very sorry for this & late reply

Thank you, best regards

Boscoe · 26th June 2011, 09:25 PM

So are there any boards available? I'm interested.

coolfox007 · 31st October 2011, 12:54 PM

Bump So are there any boards available?
Would love to build need two boards if available and parts if any for sale ( output transistors set, input fets,...)

ck111 · 18th April 2012, 09:15 AM

Are there any PCB-s available?
I need two boards if available and parts if any for sale.

masood · 27th May 2012, 07:01 PM

Quote:

Originally Posted by bigpanda

Result of 2 days work :

Please also comment on the very last one. I found the traces are more clear cut but not as artistic as Alex's.

dear bigpanda,
can you share this pcb with me.

bigpanda · 27th May 2012, 07:25 PM

If you are talking about the new one, it is here :

4shared folder - goldmund-2

19th March 2011, 02:50 AM	#322
bigpanda diyAudio Member Join Date: Jun 2004 Location: HKSAR	BUZ900 / 905 Wonder if anyone is still looking for the BUZ900 / 905 pair for the Goldmund clone project (or others?) . I can get them @ $18 / pair. For 6 pair that would be $108 + $14 shipping & RMS + $8 for paypal charge. Total $130 for a set (6pairs) for this project. Need 10-12 (sets) orders for a go-ahead. LT for supplier = 5-6 weeks. + 2 weeks from me to you. Total time from your order confirmation may be over 10 weeks Others not on this projects can also place order. Even # of pairs please. (cost varies from 6 pairs of course) Please send email order to tony_chan_cf@email.com Subject : "BUZ900/905 order" Content : <forum ID>, <paypal ID>, <# of pairs>, <Country of destination> Please do not send money to tony_chan_cf at paypal and wait for my billing. Mailing method : 1) If mailed by 3 seperate packages (4pcs each pack) by RMS, the parcel value is well covered by the max claim value and the declaration value (I would declare only 1/2 price) would not lure the custom officers. 2) If mailed by single package with insurance (if service is available to your area and most should be), full value will have to be declared and that might draw the custom officers' attention. This method could be cheaper but you might (just might) end up with additional taxation that together cost higher than the 1st method. Still looking for LSK389A. Got some Omron G8P for this project too. BP

26th June 2011, 09:25 PM	#326
Boscoe diyAudio Member Join Date: Feb 2010 Location: England	So are there any boards available? I'm interested. __________________ I thought about it once, but then thought again.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DorkbotPDX PCB Order	Laen	Vendor's Bazaar	0	9th June 2010 07:14 PM
Aleph PCB group order	Tieftoener	Pass Labs	84	11th November 2003 06:31 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th March 2011, 03:29 PM	#321
bigpanda diyAudio Member Join Date: Jun 2004 Location: HKSAR	Hi folks, Finish checking the traces and there is nothing wrong with the white silkscreen version. The only thing you have to worry is the pad holes that I mentioned in the document filed at the link in the previous post. If you can get components with thinner leads, you might not even have to do the drilling. If you use the 16A relays, you don't have to modified the D. These boards are ready. Please follow the instruction exactly to by-pass these faults. Save Mr. Earth from another pile of pcbs where we can still use them.

21st March 2011, 10:39 AM	#323
Pocoyo diyAudio Member Join Date: Jan 2007 Location: Indonesia	I'm interested for the boards If any boards left pls give it to me Best regards, jeffry

21st April 2011, 11:12 PM	#324
bigpanda diyAudio Member Join Date: Jun 2004 Location: HKSAR	Hi, For those who have asked me to 'reserve' boards for them, I think it is time to settle your reservation. BP

10th May 2011, 03:49 PM	#325
Pocoyo diyAudio Member Join Date: Jan 2007 Location: Indonesia	Hi Big Panda after i looks your pdf file & picture maybe i cancel the order im not an expert engineer but just build for hobby ( I blew up the simple lm 3886 ) Very sorry for this & late reply Thank you, best regards

31st October 2011, 12:54 PM	#327
coolfox007 diyAudio Member Join Date: May 2011 Location: Dorset	Bump So are there any boards available? Would love to build need two boards if available and parts if any for sale ( output transistors set, input fets,...)

18th April 2012, 09:15 AM	#328
ck111 diyAudio Member Join Date: Nov 2011	Are there any PCB-s available? I need two boards if available and parts if any for sale.

27th May 2012, 07:25 PM	#330
bigpanda diyAudio Member Join Date: Jun 2004 Location: HKSAR	If you are talking about the new one, it is here : 4shared folder - goldmund-2