New Manuals available
Please note that the new manuals are now available (thanks for the updates Jon); the first is the BOM for both the positive and negative builds. It is small and downloads quickly.
https://docs.google.com/fileview?id...I2ZDYtZjEzYmM1NzRmNmVi&hl=en&authkey=CJ-z_r8N
The second is the full manual and is large (very large!) and it will take some time to download.
https://docs.google.com/leaf?id=0B2...hjODMtZWQwMTA2ZDE0ZjFh&hl=en&authkey=CJnql8oH
There is a lot of really good info in the full manual including instructions on how to pay - but only when the boards have arrived.
Pleasant reading.
Alan
Please note that the new manuals are now available (thanks for the updates Jon); the first is the BOM for both the positive and negative builds. It is small and downloads quickly.
https://docs.google.com/fileview?id...I2ZDYtZjEzYmM1NzRmNmVi&hl=en&authkey=CJ-z_r8N
The second is the full manual and is large (very large!) and it will take some time to download.
https://docs.google.com/leaf?id=0B2...hjODMtZWQwMTA2ZDE0ZjFh&hl=en&authkey=CJnql8oH
There is a lot of really good info in the full manual including instructions on how to pay - but only when the boards have arrived.
Pleasant reading.
Alan
Add 2 more boards for me (total of 6)
What is the europian ekvalent to 2SC5171 and 2SA1930?
The toshibas are easy to source
Original JLH RE Group Buy Thread
I've bought from both Audiowind and Cricklewood Electronics.
Hope this helps.
The toshibas are easy to source
Yes,i found them on ebay,Thanks!
Just make sure that they have a stylised "T" on them.
The ones with a normal "T" on them are likely counterfeit, and do NOT meet the HFE specs according to the Toshiba datasheets.
Alex
Perhaps not the right area to post this, but it would be nice to see some kind of feedback from the many members who participated in the first Group Buy.
Whether good or bad !
Alex
Good I hope
Alan
I will get an overlay for the transistors before the boards are sent.Hmm,I see that Q6,Q4 and Q5 are not marked on the pcb.
How should it be?
Hmm,I see that Q6,Q4 and Q5 are not marked on the pcb.
How should it be?
I didn't mark the bigger transistors, as 2SA1930 / 2SC5171 wouldn't easily fit on the silkscreen layer. As the boards are universal, I thought it best to leave these blank. The build manual makes component placement clear, I hope.
Cheers
Jon
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- John Linsley Hood Ripple Eater - Part 2