• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Waveguides and horns

Beyma Power 15 in a closed box (5.5 cu. ft.)

What is the x-over point to the BMS coaxial comp. driver? A down firing woofer, I imagine, could result in problems with the lower mids when crossed too high, but am guessing it represents no issue in your case.

Nice to see a closed box configuration.

EDIT: with regard to sonics only, I'd recommend you may try removing the banana plugs from the wires to the BMS unit. Maybe it makes no difference, maybe you've tried already :)
 
Last edited:
Crossover points (acoustical) roughly 350Hz, 6500Hz.
 

Attachments

  • xo_uni.png
    xo_uni.png
    20.7 KB · Views: 670