Waveguides and horns - Page 9

hallcon83 · 11th June 2010, 09:23 PM

Hi guys, I just found this thread - I am also Very interested, ( read desperate ) - if it's not to late i would like to get on board . . . , will finalize my needs in the next day or so , Thank You, dean

kevinkr · 12th June 2010, 01:35 PM

Looks good, you can definitely keep me on the 300Hz list. When will you have pricing? That of course will be the crux of the matter for most of us..

jzagaja · 12th June 2010, 01:37 PM

We have to agree on particular model and then i can tell fabrication cost.

Frode · 13th June 2010, 09:49 AM

Since I'm in Norway, I can't take part in the group buy, but I'm still interested in the Iwata 300.

Frode

jzagaja · 13th June 2010, 09:55 AM

Of course you can - it isn't limited to US

Shipping cost of a largest JMLC-200 to Norway is about 100 EUR.

Frode · 10:24 AM

Quote:

Originally Posted by jzagaja

Actualized list, please check. Can everyone edit below list? (have sent question to admin)

Code:

Iwata 300 (568x417x583mm with 1-2inch throat):

Titan [PL]

kevinkr [US]
MikeR? [US]

doug20 ? [US]
Carl_Huff ? [US]
Trev? [CA]

dshambala ? [US] -- carrier 1 (Connecticut, NYC)
Scaper ? [US] -- carrier 2 (Ohio)

Frode[Norway] - 2" throat


Iwata-150:
fredsonqc
LargeBande
agent.5 ? [US]

Ok, then I'm on the list.

Frode

JoshK · 14th June 2010, 04:35 PM

Add me to Iwata 300hz.

badman · 14th June 2010, 04:53 PM

Quote:

Originally Posted by kevinkr

Looks good, you can definitely keep me on the 300Hz list. When will you have pricing? That of course will be the crux of the matter for most of us..

That's where I'm at. Iwata 300 seems nice but I need numbers.

dshambala · 15th June 2010, 02:36 PM

Iḿ leaning towards the 150hz would like to learn more about this when that becomes available.

jzagaja · 04:08 PM

Iwata-250 and 300, price 135EUR or $170. With 1" driver it is almost impossible to remove mold so 2" is preferred. Euro pallet is 120x80cm otherwise we could make Iwata-200.

12th June 2010, 01:35 PM	#82
kevinkr diyAudio Moderator Join Date: Sep 2004 Location: Boston, Massachusetts Blog Entries: 6	Looks good, you can definitely keep me on the 300Hz list. When will you have pricing? That of course will be the crux of the matter for most of us.. __________________ "Extraordinary claims require extraordinary evidence." - Carl Sagan

15th June 2010, 03:56 PM	#90
jzagaja diyAudio Member Join Date: Jun 2004 Location: Szczecin	Iwata-250 and 300, price 135EUR or $170. With 1" driver it is almost impossible to remove mold so 2" is preferred. Euro pallet is 120x80cm otherwise we could make Iwata-200. Last edited by jzagaja; 15th June 2010 at 04:08 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
smith horns and using compression horns for a Karlson party speaker project	bikehorn	Multi-Way	14	30th January 2013 05:20 PM
Horns inside of horns open foe discussion	oilcanracer	Multi-Way	3	15th February 2010 03:42 AM
Compression drivers in horns or waveguides	454Casull	Multi-Way	6	1st December 2008 12:41 PM
Phase plug necessity in horns/waveguides	454Casull	Multi-Way	3	18th September 2005 07:36 PM
Horns: Vibrations and resonances in metal horns	Rocky	Multi-Way	10	28th July 2004 01:38 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th June 2010, 09:23 PM	#81
hallcon83 diyAudio Member Join Date: Jun 2008	Hi guys, I just found this thread - I am also Very interested, ( read desperate ) - if it's not to late i would like to get on board . . . , will finalize my needs in the next day or so , Thank You, dean

12th June 2010, 01:37 PM	#83
jzagaja diyAudio Member Join Date: Jun 2004 Location: Szczecin	We have to agree on particular model and then i can tell fabrication cost.

13th June 2010, 09:49 AM	#84
Frode diyAudio Member Join Date: May 2003 Location: Bergen	Since I'm in Norway, I can't take part in the group buy, but I'm still interested in the Iwata 300. Frode

13th June 2010, 09:55 AM	#85
jzagaja diyAudio Member Join Date: Jun 2004 Location: Szczecin	Of course you can - it isn't limited to US Shipping cost of a largest JMLC-200 to Norway is about 100 EUR.

14th June 2010, 04:35 PM	#87
JoshK diyAudio Member Join Date: May 2004 Location: Toronto, ON	Add me to Iwata 300hz.

15th June 2010, 02:36 PM	#89
dshambala diyAudio Member Join Date: Mar 2008	Iḿ leaning towards the 150hz would like to learn more about this when that becomes available.