Waveguides and horns - Page 3

Carl_Huff · 9th May 2010, 06:18 PM

I vote for the 250Hz version.

LargeBande · 10th May 2010, 05:27 PM

Hi Jzagaja,
I want one pair of E-JMLC or IWATA-JMLC, FC 160 Hz T 0.707 and troat 3"54 ; + one pair FC 700 Hz, T 1.000 troat 1"!
Thanks

LargeBande · 10th May 2010, 05:34 PM

Hi Jzagaja, I want one pair of E-JMLC or Iwata-JMLC FC 150 Hz, T 0.707 and troat 3"54. And one pair more FC 700 Hz, T 1.000 and 1"...

Thanks.

jzagaja · 06:55 PM

150Hz is larger than 1 meter so the mold have to be made from two parts. Can we agree on 1 meter Iwata 200Hz? Throat 3"54? Iwata could be calculated for 2" and conical adapter for smaller horns employed.

jzagaja · 07:10 PM

Elliptical OSWG and JMLC-OSWG hybrid is also possible and recommended for standalone applications when constant directivity is needed.

LargeBande · 10th May 2010, 06:54 PM

150 or 160 Hz max..
Thanks

jzagaja · 10th May 2010, 07:14 PM

Do you have such a driver? Which?

LargeBande · 10th May 2010, 07:44 PM

1" is TAD TD 2002. 3"54 is 12" cone with phase plug 3 slots ; I do it myself!

jzagaja · 10th May 2010, 09:33 PM

We cannot make universal Iwata for such a large throat can we? This must be a completely new order.

agent.5 · 10th May 2010, 09:46 PM

I want 150hz too.

9th May 2010, 06:18 PM	#21
Carl_Huff diyAudio Member Join Date: Dec 2004 Location: Bakersfield, CA	I vote for the 250Hz version. __________________ Best Regards, Carl Huff

10th May 2010, 06:45 PM	#24
jzagaja diyAudio Member Join Date: Jun 2004 Location: Szczecin	150Hz is larger than 1 meter so the mold have to be made from two parts. Can we agree on 1 meter Iwata 200Hz? Throat 3"54? Iwata could be calculated for 2" and conical adapter for smaller horns employed. Last edited by jzagaja; 10th May 2010 at 06:55 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Horns inside of horns open foe discussion	oilcanracer	Multi-Way	3	15th February 2010 03:42 AM
Compression drivers in horns or waveguides	454Casull	Multi-Way	6	1st December 2008 12:41 PM
smith horns and using compression horns for a Karlson party speaker project	bikehorn	Multi-Way	10	27th December 2005 09:10 AM
Phase plug necessity in horns/waveguides	454Casull	Multi-Way	3	18th September 2005 07:36 PM
Horns: Vibrations and resonances in metal horns	Rocky	Multi-Way	10	28th July 2004 01:38 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th May 2010, 05:27 PM	#22
LargeBande diyAudio Member Join Date: Nov 2009	Hi Jzagaja, I want one pair of E-JMLC or IWATA-JMLC, FC 160 Hz T 0.707 and troat 3"54 ; + one pair FC 700 Hz, T 1.000 troat 1"! Thanks

10th May 2010, 05:34 PM	#23
LargeBande diyAudio Member Join Date: Nov 2009	Hi Jzagaja, I want one pair of E-JMLC or Iwata-JMLC FC 150 Hz, T 0.707 and troat 3"54. And one pair more FC 700 Hz, T 1.000 and 1"... Thanks.

10th May 2010, 06:54 PM	#26
LargeBande diyAudio Member Join Date: Nov 2009	150 or 160 Hz max.. Thanks

10th May 2010, 07:14 PM	#27
jzagaja diyAudio Member Join Date: Jun 2004 Location: Szczecin	Do you have such a driver? Which?

10th May 2010, 07:44 PM	#28
LargeBande diyAudio Member Join Date: Nov 2009	1" is TAD TD 2002. 3"54 is 12" cone with phase plug 3 slots ; I do it myself!

10th May 2010, 09:33 PM	#29
jzagaja diyAudio Member Join Date: Jun 2004 Location: Szczecin	We cannot make universal Iwata for such a large throat can we? This must be a completely new order.

10th May 2010, 09:46 PM	#30
agent.5 diyAudio Member Join Date: Aug 2003 Location: San Francisco, CA	I want 150hz too.

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
jzagaja