Another European AD1865N-K GB - Page 6 - diyAudio
Go Back   Home > Forums > Commercial Sector > Group Buys

Group Buys Members group buys

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th February 2010, 12:40 PM   #51
tassosk is offline tassosk  Greece
diyAudio Member
 
Join Date: Sep 2008
On the Salas board it says 220uf/25v and since 25V and 35V had a difference of 0.15EUR and the same lead spacing (5mm) I proposed the 35V. If 16V is OK for Salas as well then lets go for it!
  Reply With Quote
Old 16th February 2010, 01:14 PM   #52
sugden is offline sugden  Singapore
diyAudio Member
 
Join Date: Jan 2007
Location: Jurong West
Few item maybe need to be update on the BOM:
1. there is no 470 Ohm resistor on Salas Shunt for DAC.
2. there is 10 Ohm resistor at R34 for IV-stage.
3. there one more 200 Ohm trimmer on HV-supply

Please take note.
  Reply With Quote
Old 17th February 2010, 08:10 AM   #53
diyAudio Member
 
Join Date: Oct 2007
Location: Cologne
sudgen: change done. thanks!

tassosk: couldn'd find any 220F/35V capacitor, except the ones, which were oscons recommended for. neither in andreas drwings, nor in the BOM. thats why I added 16V Silmics to the spreadsheet so far. I don't replace oscons by Silmics, because I already have the oscons in my box.

Cheers Ernst
  Reply With Quote
Old 17th February 2010, 08:16 AM   #54
tassosk is offline tassosk  Greece
diyAudio Member
 
Join Date: Sep 2008
Quote:
Originally Posted by ernesternest View Post
tassosk: couldn'd find any 220F/35V capacitor, except the ones, which were oscons recommended for. neither in andreas drwings, nor in the BOM. thats why I added 16V Silmics to the spreadsheet so far. I don't replace oscons by Silmics, because I already have the oscons in my box.

Cheers Ernst
No problem.
Could we add the P11669-ND (Panasonic ED 100uf 450V) for I/V PSU C5?
(unless there are better alternatives)
  Reply With Quote
Old 17th February 2010, 08:21 AM   #55
vzs is offline vzs  Europe
diyAudio Member
 
Join Date: Dec 2005
Location: Cluj-Napoca, Romania
Quote:
Originally Posted by ernesternest View Post
I don't replace oscons by Silmics, because I already have the oscons in my box.
Where did you bought the oscons? If I couldn't find a good(cheap) source I'm thinking of replacing the 220uF with Silmics.
  Reply With Quote
Old 17th February 2010, 08:22 AM   #56
diyAudio Member
 
Join Date: Oct 2007
Location: Cologne
@ tassosk:
I've been thinking about that. Regarding better opportunities, I'm talking to another DIY guy these days and will go through the parts again with him. I'll post the outcome and alternatives, which I wanna go for before I'll close the GB here. I hope to close it around next weekend.

@vzs: Never found a really cheap source as well. Osscons are expensive. Bought them from shop www-audiotuning-de. Haven't found the absolutely right values, but took 180F and 47F.

Ernst

Last edited by ernesternest; 17th February 2010 at 08:35 AM. Reason: More Info
  Reply With Quote
Old 17th February 2010, 08:56 AM   #57
diyAudio Member
 
Join Date: Feb 2007
Location: groningen
Quote:
Originally Posted by ernesternest View Post
@ tassosk:
I've been thinking about that. Regarding better opportunities, I'm talking to another DIY guy these days and will go through the parts again with him. I'll post the outcome and alternatives, which I wanna go for before I'll close the GB here. I hope to close it around next weekend.

@vzs: Never found a really cheap source as well. Osscons are expensive. Bought them from shop www-audiotuning-de. Haven't found the absolutely right values, but took 180F and 47F.

Ernst


I don't know the prices, but here B&D Enterprises - electronics, projection lamps for hitachi, sony, mitsubishi, panasonic, samsung you can get most types OS-CON SP series Ten Four LTD
  Reply With Quote
Old 17th February 2010, 02:07 PM   #58
sugden is offline sugden  Singapore
diyAudio Member
 
Join Date: Jan 2007
Location: Jurong West
Please take note of Diodes on the HV-supply total 7pcs only.
1. 4pcs of 1N5062 are D1, D2, D3, D4.
2. 3pcs of 1N4007 are D6, D7, D8.
  Reply With Quote
Old 17th February 2010, 02:32 PM   #59
tassosk is offline tassosk  Greece
diyAudio Member
 
Join Date: Sep 2008
Quote:
Originally Posted by vzs View Post
Where did you bought the oscons? If I couldn't find a good(cheap) source I'm thinking of replacing the 220uF with Silmics.
I took mine from partconnection SG 47 20v and SP 180 20v. Priced reasonably
  Reply With Quote
Old 17th February 2010, 03:40 PM   #60
diyAudio Member
 
Join Date: Oct 2007
Location: Cologne
Quote:
Originally Posted by sugden View Post
Please take note of Diodes on the HV-supply total 7pcs only.
1. 4pcs of 1N5062 are D1, D2, D3, D4.
2. 3pcs of 1N4007 are D6, D7, D8.
Yepp. And 12 on the Salas board.

  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
European GB AD1865NK from Digikey EUVL Group Buys 56 10th February 2010 03:53 PM
Ad1865n-k MONTEFIORE Swap Meet 1 17th June 2007 01:29 PM
Conrad Heatsinks GB in GB/EU bremen nacht Parts 1 1st February 2006 08:48 PM
Fs: AD1865N-K CKW Swap Meet 0 19th January 2005 10:43 AM
AD1865N-J vs AD1865N-K bambadoo Digital Source 4 6th September 2004 05:56 PM


New To Site? Need Help?

All times are GMT. The time now is 07:24 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2