Silonex LDRs for Lightspeed Attenuator - Page 13

udailey · 14th June 2009, 10:54 PM

Still you need 2 LEDs and 2 resistors for each LED otherwise you will not be able to control output impedance. You will have all 4 resistors increase in resistance equally which is not what you want. 2 of them must decrease as fast as the other two increase. Series/Shunt

Please remind me Tad in July when I get back from vacation and I will add a few hundred more to my order so that we end up with enough for more guys to order. I tend to forget more than I remember.
Uriah

tryonziess · 14th June 2009, 11:04 PM

Uriah,
You are correct. I was thinking balanced.
Remind O.K.

Tad

udailey · 15th June 2009, 12:20 AM

Well, I would give it a shot. Its about a $15 project to try as long as you have the volume pot and 5VDC already.
Uriah

Audio_D · 17th June 2009, 03:13 PM

Hello

I am very interested in purchasing matched LDRs, I would like 4 pairs please, how much ?

Many Thanks

Audio_D

udailey · 17th June 2009, 04:32 PM

4 pairs would be 69.32
That will do 4 channels, or basically 2 different stereo amps. If you meant to take care of 4 different stereo amps it would be 131.12
If you are not sure what you need tell me what you are trying to accomplish and I will help and quote so we both know we are talking about the same numbers.
Uriah

rickmcinnis · 17th June 2009, 08:10 PM

I would like to get 4 matched pairs of the optpcouplers.

I had sent you an email but I assume it may have been lost in your spam filter.

I wanted to be sure I was using the correct email address for a PAYPAL payment.

Please let me know how to proceed with an order.

Thank you,

udailey · 18th June 2009, 12:47 AM

Rick I am sorry about that. Please shoot me an email by pressing "email" under this post or just email me at diyldr@gmailDOTcom
Uriah

Everyone, Please include your QTY as well as your name and mailing address along with your paypal email address so that I can send you an invoice.
If you do not have paypal any old email will do.

udailey · 18th June 2009, 01:16 AM

Hey Rick,
I guess I emailed you back on June 9th so maybe I got lost in YOUR spam filter

Well, I am sure we will get it sorted.
Uriah

Salsero · 20th June 2009, 01:26 PM

Hi,
How do we proceed for non-pay pal? Just never needed it. I would like a stereo pair.
Thanks
Salsero

udailey · 20th June 2009, 05:31 PM

You can email me for my address. I would only take USPS money orders. No Western Union or any other type.
Uriah

14th June 2009, 10:54 PM	#121
udailey Passive Aggressive diyAudio Member Join Date: Mar 2008	Still you need 2 LEDs and 2 resistors for each LED otherwise you will not be able to control output impedance. You will have all 4 resistors increase in resistance equally which is not what you want. 2 of them must decrease as fast as the other two increase. Series/Shunt Please remind me Tad in July when I get back from vacation and I will add a few hundred more to my order so that we end up with enough for more guys to order. I tend to forget more than I remember. Uriah __________________ You can purchase LDRs anytime to build a standard LDR attenuator or to build my new LDR Attenuator "A Lighter Note". Email me. diyldr@gmail.com

15th June 2009, 12:20 AM	#123
udailey Passive Aggressive diyAudio Member Join Date: Mar 2008	Well, I would give it a shot. Its about a $15 project to try as long as you have the volume pot and 5VDC already. Uriah __________________ You can purchase LDRs anytime to build a standard LDR attenuator or to build my new LDR Attenuator "A Lighter Note". Email me. diyldr@gmail.com

17th June 2009, 04:32 PM	#125
udailey Passive Aggressive diyAudio Member Join Date: Mar 2008	4 pairs would be 69.32 That will do 4 channels, or basically 2 different stereo amps. If you meant to take care of 4 different stereo amps it would be 131.12 If you are not sure what you need tell me what you are trying to accomplish and I will help and quote so we both know we are talking about the same numbers. Uriah __________________ You can purchase LDRs anytime to build a standard LDR attenuator or to build my new LDR Attenuator "A Lighter Note". Email me. diyldr@gmail.com

17th June 2009, 08:10 PM	#126
rickmcinnis diyAudio Member Join Date: Jun 2006	Ordering question I would like to get 4 matched pairs of the optpcouplers. I had sent you an email but I assume it may have been lost in your spam filter. I wanted to be sure I was using the correct email address for a PAYPAL payment. Please let me know how to proceed with an order. Thank you, __________________ Rick McInnis

18th June 2009, 12:47 AM	#127
udailey Passive Aggressive diyAudio Member Join Date: Mar 2008	Contact me for LDRs Rick I am sorry about that. Please shoot me an email by pressing "email" under this post or just email me at diyldr@gmailDOTcom Uriah Everyone, Please include your QTY as well as your name and mailing address along with your paypal email address so that I can send you an invoice. If you do not have paypal any old email will do. __________________ You can purchase LDRs anytime to build a standard LDR attenuator or to build my new LDR Attenuator "A Lighter Note". Email me. diyldr@gmail.com


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

14th June 2009, 11:04 PM	#122
tryonziess diyAudio Member Join Date: Apr 2007	Uriah, You are correct. I was thinking balanced. Remind O.K. Tad

17th June 2009, 03:13 PM	#124
Audio_D diyAudio Member Join Date: Jan 2009 Location: London	Hello I am very interested in purchasing matched LDRs, I would like 4 pairs please, how much ? Many Thanks Audio_D

18th June 2009, 01:16 AM	#128
udailey Passive Aggressive diyAudio Member Join Date: Mar 2008	Hey Rick, I guess I emailed you back on June 9th so maybe I got lost in YOUR spam filter Well, I am sure we will get it sorted. Uriah __________________ You can purchase LDRs anytime to build a standard LDR attenuator or to build my new LDR Attenuator "A Lighter Note". Email me. diyldr@gmail.com

20th June 2009, 01:26 PM	#129
Salsero diyAudio Member Join Date: May 2003 Location: Texas USA	in for a stereo pair Hi, How do we proceed for non-pay pal? Just never needed it. I would like a stereo pair. Thanks Salsero

20th June 2009, 05:31 PM	#130
udailey Passive Aggressive diyAudio Member Join Date: Mar 2008	You can email me for my address. I would only take USPS money orders. No Western Union or any other type. Uriah __________________ You can purchase LDRs anytime to build a standard LDR attenuator or to build my new LDR Attenuator "A Lighter Note". Email me. diyldr@gmail.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NEW Silonex LDRs for Lightspeed Attenuator	udailey	Group Buys	170	7th June 2011 11:23 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read