Phonoclone and VSPS Group Buys - Page 10

rjm · 18th May 2010, 01:16 AM

Here you are.

danrgleason · 10th June 2010, 12:44 AM

I have clicked on all links related to this project and it does not look like PCB or kits are available anymore are they?
If not, I will use the PCB .brd file you posted and the BOM and go ahead and build it. Since this is only my third DIY project, I am still in the buy the kit and modify after you learn mode, but I guess I have to learn to fly someday...
Please let me know if there are any PCB or kits around (powr supply also obviously).

Thanks!

nilena · 10th June 2010, 03:34 AM

Hi there will also be interested in VSPS 300 boards if available
thanks

rjm · 09:39 AM

All the RJM Audio boards and parts are still available, please see phonoclone.com for details.

nilena · 11th June 2010, 07:43 AM

Hi there again
I looked in the site but was unable to find any reference to pre made boards or kits for sale or , however, I saw the reverence to Olimar to get the boards made.

please advise if this is correct or if there is an alternative to get the boards from you or as part of a group buy.

Gerry

rjm · 12:59 AM

I'm not sure how you missed it, but the price list is on this page.

/rjm

rjm · 24th August 2010, 07:07 AM

Update: I will be stocking the OPA27 and sockets as well as the transistors. So presently I have all parts except for the resistors... expect to have some "resistor packs" to make a full kit (for the Phonoclone 3 at least) available in limited numbers later this year.

RJM Audio - Printed Circuit Boards

rjm · 20th February 2011, 05:23 AM

Update: Temporarily out of stock of phonoclone 3 boards. Running low on C1,C2,and C3 for both Phonoclone and VSPS300 projects. Sold out of op amps and sockets. Down to the last 30 VSPS Kits... the cupboards are rather bare these days at RJM Audio.

C1-3 provoke a small crisis, as these were bought in bulk ages ago at a very good discount and searching the web it doesn't look like I'm going to be able to find replacements at anything close to the same price.

Wanted: low voltage axial polypropylene film cap with a value between 1.6 uF to 2.5 uF. Price about $1-2 ea.

Just wanted to let people know that stocks are going to be patchy for a while until I can find some new suppliers.

rjm · 23rd March 2011, 01:05 AM

Update: I have ordered ten sets of resistors for the Phonoclone 3. The price of the full Phonoclone 3 "kit" is $125, limited to a quantity of 8-9, possibly less depending on the remaining stock of C1-3.

I'm going to let the stock run empty and then decide what to do about replacements. I did do some searching on the web but couldn't find anything near the same price.

rjm · 29th March 2011, 12:41 PM

Mouser parts arrived today. Op amps and sockets back in stock, resistors for Phonoclone 3 now in stock.

10th June 2010, 12:44 AM	#92
danrgleason diyAudio Member Join Date: Dec 2009	Would like to build Phonoclone 3 I have clicked on all links related to this project and it does not look like PCB or kits are available anymore are they? If not, I will use the PCB .brd file you posted and the BOM and go ahead and build it. Since this is only my third DIY project, I am still in the buy the kit and modify after you learn mode, but I guess I have to learn to fly someday... Please let me know if there are any PCB or kits around (powr supply also obviously). Thanks!

10th June 2010, 09:31 AM	#94
rjm Richard Murdey diyAudio Member Join Date: May 2004 Location: Kyoto Blog Entries: 32	All the RJM Audio boards and parts are still available, please see phonoclone.com for details. __________________ RJM Audio (phonoclone.com) Last edited by rjm; 10th June 2010 at 09:39 AM.

15th June 2010, 12:40 AM	#96
rjm Richard Murdey diyAudio Member Join Date: May 2004 Location: Kyoto Blog Entries: 32	I'm not sure how you missed it, but the price list is on this page. /rjm __________________ RJM Audio (phonoclone.com) Last edited by rjm; 15th June 2010 at 12:59 AM.

24th August 2010, 07:07 AM	#97
rjm Richard Murdey diyAudio Member Join Date: May 2004 Location: Kyoto Blog Entries: 32	Update: I will be stocking the OPA27 and sockets as well as the transistors. So presently I have all parts except for the resistors... expect to have some "resistor packs" to make a full kit (for the Phonoclone 3 at least) available in limited numbers later this year. RJM Audio - Printed Circuit Boards __________________ RJM Audio (phonoclone.com)

20th February 2011, 05:23 AM	#98
rjm Richard Murdey diyAudio Member Join Date: May 2004 Location: Kyoto Blog Entries: 32	Update: Temporarily out of stock of phonoclone 3 boards. Running low on C1,C2,and C3 for both Phonoclone and VSPS300 projects. Sold out of op amps and sockets. Down to the last 30 VSPS Kits... the cupboards are rather bare these days at RJM Audio. C1-3 provoke a small crisis, as these were bought in bulk ages ago at a very good discount and searching the web it doesn't look like I'm going to be able to find replacements at anything close to the same price. Wanted: low voltage axial polypropylene film cap with a value between 1.6 uF to 2.5 uF. Price about $1-2 ea. Just wanted to let people know that stocks are going to be patchy for a while until I can find some new suppliers. __________________ RJM Audio (phonoclone.com)


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th June 2010, 03:34 AM	#93
nilena diyAudio Member Join Date: Feb 2007 Location: Sydney	Hi there will also be interested in VSPS 300 boards if available thanks

11th June 2010, 07:43 AM	#95
nilena diyAudio Member Join Date: Feb 2007 Location: Sydney	Hi there again I looked in the site but was unable to find any reference to pre made boards or kits for sale or , however, I saw the reverence to Olimar to get the boards made. please advise if this is correct or if there is an alternative to get the boards from you or as part of a group buy. Gerry

23rd March 2011, 01:05 AM	#99
rjm Richard Murdey diyAudio Member Join Date: May 2004 Location: Kyoto Blog Entries: 32	Update: I have ordered ten sets of resistors for the Phonoclone 3. The price of the full Phonoclone 3 "kit" is $125, limited to a quantity of 8-9, possibly less depending on the remaining stock of C1-3. I'm going to let the stock run empty and then decide what to do about replacements. I did do some searching on the web but couldn't find anything near the same price. __________________ RJM Audio (phonoclone.com)

29th March 2011, 12:41 PM	#100
rjm Richard Murdey diyAudio Member Join Date: May 2004 Location: Kyoto Blog Entries: 32	Mouser parts arrived today. Op amps and sockets back in stock, resistors for Phonoclone 3 now in stock. __________________ RJM Audio (phonoclone.com)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
VSPS and Phonoclone boards	heady	Swap Meet	7	30th October 2007 08:18 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read