Aavid Thermalloy Possible Group Buy - Page 11

Coulomb · 3rd March 2009, 01:03 PM

Quote:

Originally posted by sts9fan
So for the large chassis you should order the 10" and the small the 8"? Is that correct?

Actually the Chassis length and width do not change with the hieght. So either 8" or 10" is not a determining factor in large or small chassis.

What does matter is the number of heatsinks you intend to use per side.
2 per side = Large
1 per side = Small

Anthony

Coulomb · 3rd March 2009, 01:44 PM

Cast your votes on the interest wiki.

GB wiki

Anthony

Tube Noob · 3rd March 2009, 05:59 PM

I would be in for the 8" or 10" (preferably 8) and the small basic chassis kit (one heat sink per side? - 158?)

If these kits were priced around 158 each I would purchase at least two kits.

I only need four heat sinks total, but I do want two chassis kits.

Icarium · 3rd March 2009, 06:30 PM

Sorry if this is newb, but I'm completely new to this sort of group buy. What kind of time frames should I expect? That's the only piece of information before putting down solid interest

bulldawg81 · 3rd March 2009, 06:41 PM

What are the internal dimensions of the chassis? I looked at all your attached sketches and didn't see any overall chassis dimensions.

Coulomb · 3rd March 2009, 07:16 PM

Quote:

Originally posted by bulldawg81
What are the internal dimensions of the chassis? I looked at all your attached sketches and didn't see any overall chassis dimensions.

Internal Roughly 14" long x 11" Wide x 8" or 10" High

Overall Exterior 14.5" Long x 17" Wide x 8" or 10" High

Anthony

Coulomb · 3rd March 2009, 07:20 PM

Quote:

Originally posted by Icarium
Sorry if this is newb, but I'm completely new to this sort of group buy. What kind of time frames should I expect? That's the only piece of information before putting down solid interest

Well still a little fuzzy as yet it depends on how long it take the GB to reach a critical mass. Still waiting on material avaiability from R-Theta.

Anthony

Icarium · 3rd March 2009, 07:27 PM

If you think early summer is a realistic goal I'll confirm with my compatriots and get some #s for the survey

Coulomb · 3rd March 2009, 07:32 PM

Quote:

Originally posted by Icarium
If you think early summer is a realistic goal I'll confirm with my compatriots and get some #s for the survey

Yes I think that is reasonable.

Anthony

Coulomb · 3rd March 2009, 07:34 PM

On a side note this is the switch I just ordered for my Front Panels.

The units I ordered have a black cap not a red one. The blue ring iluminates in a glowing blue aura.
Contacts rated as 16A @125VAC or 10A @250VAC

Click on image, you may get a cursor to click on to enlarge to full size for better image.

Anthony

3rd March 2009, 01:44 PM	#102
Coulomb diyAudio Member Join Date: Jul 2002 Location: Ancaster, Ontario	Cast your votes on the interest wiki. GB wiki Anthony __________________ I like to stay current!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new to group	Lemalin22	Introductions	3	22nd June 2007 01:22 AM
TO-220 Aavid Thermalloy Heatsink, 532-531202B25	gengis	Swap Meet	0	29th September 2006 02:17 AM
FS: TO-220, 247 Aavid Thermalloy Heatsink	gengis	Swap Meet	8	18th July 2005 03:31 AM
Anybody need new Thermalloy heatsinks	dedend	Swap Meet	3	20th January 2005 03:21 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd March 2009, 05:59 PM	#103
Tube Noob diyAudio Member Join Date: Feb 2008 Location: Cleveland, Ohio	I would be in for the 8" or 10" (preferably 8) and the small basic chassis kit (one heat sink per side? - 158?) If these kits were priced around 158 each I would purchase at least two kits. I only need four heat sinks total, but I do want two chassis kits.

3rd March 2009, 06:30 PM	#104
Icarium diyAudio Member Join Date: Aug 2007	Sorry if this is newb, but I'm completely new to this sort of group buy. What kind of time frames should I expect? That's the only piece of information before putting down solid interest

3rd March 2009, 06:41 PM	#105
bulldawg81 diyAudio Member Join Date: Oct 2008	What are the internal dimensions of the chassis? I looked at all your attached sketches and didn't see any overall chassis dimensions.

3rd March 2009, 07:27 PM	#108
Icarium diyAudio Member Join Date: Aug 2007	If you think early summer is a realistic goal I'll confirm with my compatriots and get some #s for the survey

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)