Toshiba Dual JFET Heatsink - Page 2

EUVL · 29th December 2008, 04:10 AM

ticknpop 50
housing ?
valeriano 25
ken.berg 25
luvdunhill 25 (North America distributor)
JimT 25
jims 25
Sigurd Ruschkow 50
EUVL 100
Uli 50

Total till now 375; 125 to go.

Patrick

Scott Stansbury · 29th December 2008, 03:36 PM

I'm good for 25...

Scott...

CheffDeGaar · 29th December 2008, 04:32 PM

Hi Patrick,

Nice little things

Count me in for 25

Would it be possible to have the mech drawing with dimensions (for pcb drawing) ?

Thanks for that great idea.

Cheers

EUVL · 29th December 2008, 05:00 PM

ticknpop 50
housing ?
valeriano 25
ken.berg 25
luvdunhill 25 (North America distributor)
JimT 25
jims 25
Sigurd Ruschkow 50
EUVL 100
Uli 50
Scott Stansbury 25
CheffDeGaar 25

Total till now 425; 75 to go.

Cheff, you get a printed drawing with the delivery. OK ?

As mentioned on the original thread, the overall dimensions are 16mm x 8mm x 4mm. The centre of the TO92 is approx. 3mm from the side without fins.

Patrick

mlloyd1 · 29th December 2008, 05:12 PM

hi patrick:

i will take 25.

mlloyd1

Valeriano · 29th December 2008, 08:00 PM

Quote:

Originally posted by EUVL

Total till now 425; 75 to go.

almost there, come on guys!

Vale

CheffDeGaar · 30th December 2008, 07:50 AM

Quote:

Originally posted by EUVL Cheff, you get a printed drawing with the delivery. OK ?
As mentioned on the original thread, the overall dimensions are 16mm x 8mm x 4mm. The centre of the TO92 is approx. 3mm from the side without fins.

OK, thanks

EUVL · 30th December 2008, 08:20 AM

ticknpop 50
housing ?
valeriano 25
ken.berg 25
luvdunhill 25 (North America distributor)
JimT 25
jims 25
Sigurd Ruschkow 50
EUVL 100
Uli 50
Scott Stansbury 25
CheffDeGaar 25
mlloyd1 25

Total till now 450; 50 to go.

I shall talk to my supplier and plan production. Once I get a quote and set up a paypal account, I shall let you know.

Patrick

jameshillj · 31st December 2008, 02:07 AM

Hi Patrick,
I'd like to have 50 of these nifty little gadgets - I've used small clips and flat bits of Copper (PITA!) - this is much better.

As has been said here before, perfect for that extremely useful JC buffers and with just a bit more work, can fit the Silonex LDRs for the Lightspeed Vol control, etc, etc. (endless uses)

I will look after any distribution that's required down this end of the globe if required (Oz, NZ, SE Asia, etc) - did a small local GB last year for the last of the Lu1014 Jfets - no problems.

Any Estimated Time of Manufacture and Final Costing?(ETM/EFC)

Nice design - good idea.

EUVL · 31st December 2008, 04:46 AM

ticknpop 50
valeriano 25
ken.berg 25
luvdunhill 25 (North America distributor)
JimT 25
jims 25
Sigurd Ruschkow 50
EUVL 100
Uli 50
Scott Stansbury 25
CheffDeGaar 25
mlloyd1 25
jameshillj 50

Total till now 500. Any latercomers can take some from my 100.
Cost per heatsink as promised USD2.50 plus paypal. Postage & packing included. For North America you should add on top local distribution costs. I try to get them done before End of January, but have not had a definite committment from my supplier as yet.

Once I have quotes for delivery, we can proceed to payment & shipment details.

Happy New Year,
Patrick

Housing : I have not heard from you so I took you off the list for now. Pls get in touch if you need any.

Patrick

29th December 2008, 04:32 PM	#13
CheffDeGaar diyAudio Member Join Date: Feb 2003 Location: This Universe, I think	Hi Patrick, Nice little things Count me in for 25 Would it be possible to have the mech drawing with dimensions (for pcb drawing) ? Thanks for that great idea. Cheers __________________ /Cheff - Falling feels like flying, until you hit the ground

31st December 2008, 02:07 AM	#19
jameshillj diyAudio Member Join Date: Feb 2005 Location: Melbourne, Aust	Twin TO92 H/S Hi Patrick, I'd like to have 50 of these nifty little gadgets - I've used small clips and flat bits of Copper (PITA!) - this is much better. As has been said here before, perfect for that extremely useful JC buffers and with just a bit more work, can fit the Silonex LDRs for the Lightspeed Vol control, etc, etc. (endless uses) I will look after any distribution that's required down this end of the globe if required (Oz, NZ, SE Asia, etc) - did a small local GB last year for the last of the Lu1014 Jfets - no problems. Any Estimated Time of Manufacture and Final Costing?(ETM/EFC) Nice design - good idea. __________________ ... jh

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Toshiba Dual Fet 2sk389bl N Channel Match - 4pcs	WALTER BURKHARD	Swap Meet	0	13th September 2008 07:07 PM
dual N Channel Jfet	eapavant	Parts	2	8th February 2008 08:10 AM
PMBFJ620 dual Jfet	Ipanema	Parts	6	7th December 2006 06:19 AM
Toshiba monolithic dual transistors: SA1349/SC3381	capslock	Parts	41	20th April 2002 07:09 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

29th December 2008, 04:10 AM	#11
EUVL diyAudio Member Join Date: Oct 2003	ticknpop 50 housing ? valeriano 25 ken.berg 25 luvdunhill 25 (North America distributor) JimT 25 jims 25 Sigurd Ruschkow 50 EUVL 100 Uli 50 Total till now 375; 125 to go. Patrick

29th December 2008, 03:36 PM	#12
Scott Stansbury diyAudio Member Join Date: Nov 2004 Location: Central Mass	I'm good for 25... Scott...

29th December 2008, 05:12 PM	#15
mlloyd1 diyAudio Member Join Date: Feb 2001 Location: illinois	hi patrick: i will take 25. mlloyd1

30th December 2008, 08:20 AM	#18
EUVL diyAudio Member Join Date: Oct 2003	ticknpop 50 housing ? valeriano 25 ken.berg 25 luvdunhill 25 (North America distributor) JimT 25 jims 25 Sigurd Ruschkow 50 EUVL 100 Uli 50 Scott Stansbury 25 CheffDeGaar 25 mlloyd1 25 Total till now 450; 50 to go. I shall talk to my supplier and plan production. Once I get a quote and set up a paypal account, I shall let you know. Patrick

31st December 2008, 04:46 AM	#20
EUVL diyAudio Member Join Date: Oct 2003	ticknpop 50 valeriano 25 ken.berg 25 luvdunhill 25 (North America distributor) JimT 25 jims 25 Sigurd Ruschkow 50 EUVL 100 Uli 50 Scott Stansbury 25 CheffDeGaar 25 mlloyd1 25 jameshillj 50 Total till now 500. Any latercomers can take some from my 100. Cost per heatsink as promised USD2.50 plus paypal. Postage & packing included. For North America you should add on top local distribution costs. I try to get them done before End of January, but have not had a definite committment from my supplier as yet. Once I have quotes for delivery, we can proceed to payment & shipment details. Happy New Year, Patrick Housing : I have not heard from you so I took you off the list for now. Pls get in touch if you need any. Patrick

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)