Gb: F5 Pcb - Page 121

wingman65 · 27th March 2010, 04:33 AM

You guys are building some nice amps, I think I found my next diy project. This is a lot of information for a first time amp builder to take in, thanks for helping to simplify it (somewhat). I need to hook up with Cviller for boards first if still available. For stereo I need 2 F5 boards 1 Psu board and 2 bridge boards, is that correct? One more question, is it better to order parts kits from Tech-diy or should I order individual from the Pom for best compatability with the pcb boards? Thanks for the work you guys put ino this.

Tony

acold7dusta · 27th March 2010, 04:12 PM

Quote:

Originally Posted by wingman65

For stereo I need 2 F5 boards 1 Psu board and 2 bridge boards, is that correct?

Correct, on top of speaker outs/RCA inputs switch, fuse, IEC, etc.

Quote:

One more question, is it better to order parts kits from Tech-diy or should I order individual from the Pom for best compatability with the pcb boards? Thanks for the work you guys put ino this.

Ordering from Tech-diy will be the easiest solution, and 10 or so pages back mentions that jack from techdiy worked with cviller to ensure proper fit/compatibility

wingman65 · 27th March 2010, 05:59 PM

Thanks for the response ...dusta, currently reading over the PassF5 thread. That is a huge thread

Tony

cviller · 28th March 2010, 07:34 PM

Quote:

Originally Posted by wingman65

Thanks for the response ...dusta, currently reading over the PassF5 thread. That is a huge thread

Tony

You are a brave man!

wingman65 · 29th March 2010, 02:41 AM

Quote:

Originally Posted by cviller

You are a brave man!

We'll see when it comes time to flip the switch for the first time

Do you still have all the boards available? If so, I will be making an order from you in the next week. I'm currently still gathering information and purchase lists, I certainly want to join in on the F5 fun. Any idea about how many sets of boards you have sold so far?

Tony

HaflerFreak · 24th April 2010, 10:04 AM

Thank you Christian,
Boards arrived Friday, the 23rd. So beautiful and perfect! I have seen some nice point to point, but these boards make it so very perfect and neat. 176,000uF at my command......
Thanks again,
Scott

Renron · 25th April 2010, 01:48 AM

Scott,
Welcome to club Cviller! Purveyer of the finest boards available anywhere!
I love my F5 boards and how well it sounds with good quality components, Christian is always willing to answer any questions you may have. He's a very nice guy. I still owe you a beer next BA..........!

Scott, (again)
Someday I'll PM you with a problem I have with my Hafler DH200 and beg for assistance.

Ron

HaflerFreak · 25th April 2010, 07:29 AM

I just cannot resist, here is some (excuse the term) solder porn.

Renron · 25th April 2010, 04:36 PM

LOL,
Those are the exact same Rs and Caps that I have...........Your gonna love it, plenty of punch!

Ron

cviller · 26th April 2010, 05:32 AM

Nice pictures HaflerFreak! I'm happy you like the boards.

25th April 2010, 01:48 AM	#1207
Renron diyAudio Member Join Date: Jan 2007 Location: Sacramento	Scott, Welcome to club Cviller! Purveyer of the finest boards available anywhere! I love my F5 boards and how well it sounds with good quality components, Christian is always willing to answer any questions you may have. He's a very nice guy. I still owe you a beer next BA..........! Scott, (again) Someday I'll PM you with a problem I have with my Hafler DH200 and beg for assistance. Ron __________________ "If it doesn't work properly, hope it catches on fire"- Nelson Pass @ BA3 "I fired up the prototype. Literally." The Prophet Pass.

25th April 2010, 04:36 PM	#1209
Renron diyAudio Member Join Date: Jan 2007 Location: Sacramento	LOL, Those are the exact same Rs and Caps that I have...........Your gonna love it, plenty of punch! Ron __________________ "If it doesn't work properly, hope it catches on fire"- Nelson Pass @ BA3 "I fired up the prototype. Literally." The Prophet Pass.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th March 2010, 04:33 AM	#1201
wingman65 diyAudio Member Join Date: Mar 2010	You guys are building some nice amps, I think I found my next diy project. This is a lot of information for a first time amp builder to take in, thanks for helping to simplify it (somewhat). I need to hook up with Cviller for boards first if still available. For stereo I need 2 F5 boards 1 Psu board and 2 bridge boards, is that correct? One more question, is it better to order parts kits from Tech-diy or should I order individual from the Pom for best compatability with the pcb boards? Thanks for the work you guys put ino this. Tony

27th March 2010, 05:59 PM	#1203
wingman65 diyAudio Member Join Date: Mar 2010	Thanks for the response ...dusta, currently reading over the PassF5 thread. That is a huge thread Tony

24th April 2010, 10:04 AM	#1206
HaflerFreak diyAudio Member Join Date: Jun 2007 Location: Westmont, IL	Thank you Christian, Boards arrived Friday, the 23rd. So beautiful and perfect! I have seen some nice point to point, but these boards make it so very perfect and neat. 176,000uF at my command...... Thanks again, Scott

26th April 2010, 05:32 AM	#1210
cviller diyAudio Member Join Date: Dec 2005 Location: Copenhagen Blog Entries: 2	Nice pictures HaflerFreak! I'm happy you like the boards.