• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

GB -- LME49810 Surfboard

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
One of the things which seems to keep folks from using the LME49810 and the LM4780 is the tight spacing of the pins -- this "surfboard" measures 0.800 x 0.800 inches and the pinout would use a pair of 1x7 0.100" headers -- I will have to panelize them to get the cost down to a reasonable level -- let me know what you think.

An externally hosted image should be here but it was not working when we last tested it.


With the surfboard you can solder right onto a Vectorboard or RS PC Prototyping board.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.